REPAIR WOODEN ALUMINIUM STEEL JOINERY AND CONNECTED WORKS AND REPAIR TO COMPOUND WALL FENCING CONCERTINA COIL DRAINS CULVERT AND MISC B/R ITEMS AT C2A AND C2B UNDER GE (EAST) MATHURA

Amount

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0sqm and not exceeding 2.0sqm each complete all as specified and as directed.

S&F Pressed steel frames of size 125x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.

S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.

M&L for cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and as directed.

Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick complete all as specified and as directed.

S&F 35 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel commercial type on both side complete all as specified and as directed.

S&F 35 mm thick factory made glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.20 (a) complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. square tube,supplying & fixing in opening as per specification & drawing complete all as specified.

S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.

S&F 150 mm long aluminium anodised handles, fabricated type complete all as specified and as directed.

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 100 mm long stainless steel Butt hinges, complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body anodised overall length of cover plate 150mm with hard drawn steel spring, fixed in floor complete all as specfied and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars dovetailed or welded fixed to wall complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F MS Framed work such as grills gratings, door and cooler stand, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for door windows, ventilators (sliding, fixed or casement) with one or more rebates including joining cleat for fixing etc,complete all as specified and as directed.

M&L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F aluminium partition wall using double groove aluminium section of size 63.5 x 38.1 x 2mm thick and providing 5 mm thick tinted glass and 20 mm thick pre-laminated particle board in ratio of 50:50 with all necessary fittings. Vertical section has to be supported with angle of size 65 x 65 x 6 mm thick including making good of existing surface complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as spicified and as directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.18mm with stainless steel wire staples complete all as specified and as directed.

S&F in repair 150 mm long aluminium anodised handles, fabricated type complete all as specified and as directed.

S&F in repair 150 mm size aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of Brass, bright finished for cub board shutters/kitchen shutters complete all as specified and as directed.

S&F in repair stainless steel pressed handles 150mm oval type, suitable for steel window/ventilators complete all as specified and as directed.

S&F in repair mild steel peg stay suitable for steel window/ventilators complete all as specified and as directed.

M&L for easing and adjusting steel windows and ventilator of any size including welding/tightening of box type hinges, peg stay etc for smooth functional of windows and ventilator complete all as specified and as directed.

S&F in repair floor door stopper of aluminium anodised body and tengue, anodised with hard drwan steel spring overall length of cover plate 140 mm complete all as specfied and as directed.

S&F in repair PVC Door Seal 1.20 Mtr long fixed with wooden/aluminium door complete all as specified and as directed.

S&F in repair stainless steel peg set of 8 hooks fixed to wall or wooden door complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc. complete all as specified and as directed.

S&F 100 mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F in reapirs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F 100 mm size mortice lock of mild steel, vertical type, 4 levers complete all as specified and as directed.

S&F in repair 100 mm size mortice lock of brass, vertical type, 4 levers complete all as specified and as directed.

Taking down 12mm thick toughened glass door shutter area exc 1.5 Sqm but n exc 4 Sqm each, adjustment, greasing & oiling of floor door spring refixing the door in same opening and making the door for smooth function complete all as specified and as directed.

S&F in repair stainless steel lock fixed to toughen glass door shutter, horizontal type, 4 levers, complete all as specified and as directed.

S&F 5mm thick, Sheet glass tinted quality and glazing with aluminium/rubber beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F in repair sheet glass 5.5 mm thick tinted glass and glazing with aluminium/rubber beading in square exc. 0.5 square metre in each pane complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete all as specified and as directed.

S&F in repair 4mm thick sheet glass ordinary quality exc 0.50Sqm but not exc 1.00 Sqm in each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws fixed in aluminium windows compete all as specified and as directed.

S & F in repairs 4 mm thick pin headed/figured/frosted glass ordinary quality and glazing with oil putty/wooden/rubber beading in square n.exc. 0.5 sqm in each pane complete all as specified and as directed.

M&L for repairing steel windows and ventilators hinges, brackets, steel handle, etc by spot welding at site complete all as directed.

S&F in repairs 100 mm long MS Butt hinges cold rolled mild steel meadium weight fixed to MS pressed steel chowkhats including necessary welding and making good of damaged portion etc complete all as specified and as directed.

M&L for taking down aluminium door shutter of any size dismantling stiles and rails including glass sheet and partical board sheet etc replacement of 6mm dia GI screw to full width of shutter bolts 2 Nos one at each top and bottom with necessary cleats using srews and nuts etc and refixing the sutter after assembly using same sheet glass and particle board complete all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F aluminium extruded section body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as sepcified and as directed.

S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as sepcified and as directed.

M&L for 12 mm thick plain/Frosted tuffened glass in opening and shelves/Partition including cutting and grooving on wall with or without aluminium frame, rail, handle lock etc including floor machine roller complete all as specified and as directed.

Taking down of old aluminium shutter of any description exc 1.50 Sqm n exec 4 Sqm each repair the locking arrangement, floor spring, adjusting bottom and top pivot refixed in the same position complete all as specified and as directed.

Taking down old aluminium shutter of any description n'exc 1.50 Sqm each repair locking arrangement, floor spring, bottom and top rail and refixed in the same position complete all as specified and as directed.

Taking down 12mm thick toughned glass exc 1.50 sqm but not 4.00 sqm to repair the hardware fittings such as Handle, Lock, floor spring, bottom & Top pivot, etc and refixing in same position complete all as specified and as directed.

Taking down boarding as in kitchen cabinet, cup boards/shelfs/partitions complete all as specified and as directed.

S&F 18 mm thick Hybrid WPC board in cupboard shutter/Shelves/kitchen cabinet decorative on one side & other side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt etc complete all as specified and as directed.

S&F 18 mm thick Hybrid WPC board in cupboard shutter/kitchen cabinet with both side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt etc complete all as specified and as directed.

S&F 12 mm thick Hybrid WPC board plain white (Matt finish) colour fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer complete all as specified and as directed.

S&F Ball bearing runner 450 mm Telescopic (KTS-20) full extension load capacity 50 kg complete all as specified and as directed.

S&F stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet shutters complete all as specified and as directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.

S&F Continuous (piano) hinges width of flaps 30 mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F Magnatic catcher of size 20mm x 50mm suitable for cup board/kitchen cabinet shutter complete all as specified and as directed.

S&F stainless steel 304 grade kitchen modular baskets for storage of plates, cups, grain basket, glass cutlery, bottles etc as per required size complete all as directed.

S&F plate rack fabricated out of 0.80mm thick stainless steel sheet overall size 900mmx900mm for kitchen complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint complete all as specified and as directed.

M&L for 4 mm thick designer non-asbestos fibre cement building board having fire resistance & moisture resistance properties fixed to aluminium grid with screw complete all as specified and as directed.

S&F PVC Wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawing complete all as specified and as directed..

S&F 5mm thick PVC Sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Taking down Cement plaster from brick wall/ceilling etc incl racking out joint & hacking out for key and scrubbing down with water complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick/concrete surfaces in cement mortar 1:4 mixed with liquid water proofing fompound finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of concrete surface as on ceiling in cement mortar 1:3 finished even & fair complete all as specified and as directed.

M&L prepration of new plastered surfaces of walls and providing wall care putty not less than 1mm thick to achieve smooth surface and applying two coats of oil bound distember over a coat of alkali resistant primer complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new plaster surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for prepration of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and as directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over primed surface complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work with old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in louvers and jallies 40mm thick (measured solid) including all mouldings set in CM 1:4. complete all as specified and as directed.

Demolition of reinforced cement concrete as in cover slabs/roof slabs/beams/columns of any description not otherwise specially provided for (reinforcement cut as required to faciliate demolition) complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for MS TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item serial No 88.00 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M&L for renforced cement concrete 1:1½:3 type A-1 (using 20 mm graded stone aggregates) as in slab supported on walls, Beams, and columns in floor, roof beams and shelves etc for soak well/septic complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, landing and similar work n. exc 200 mm thick, (Horizontal or sloping) for rough finished surface of concrete complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above ground level) including removal of debris outside of MOD land complete all as specified and as directed.

M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregates) as in surface drain, benching etc complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in natural ground and making good disturbed area complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

S&F Mild steel work as in hand rails , half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc. incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 5 to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed.

S&F mild steel round bars 10mm dia cut to length, bent to shape required bent to shape hoking end required and fixed in fencing confirming to Fe 410-W or Fe 290 complete all as specified and as directed.

Fixing only chain link fencing including line wire any mesh, size and tied to any type of standards, rails, straining bolts etc including provision of binding wire. complete all as specified and as directed.

Supply only chain link having MS galvanised 4mm dia wire and mesh of size 50mmx50mm complete all as specified and as directed.

S&F in repair galvanised 2 strand, steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins etc complete as specified and as directed Note: (Each line wire to be measured)

S&F in repair concertina coil 450mm dia with 2.50mm dia high tensile strength wire fixing to Y-shaped angle iron posts security with necessary clips on top of boundary wall complete as specified and as directed

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping complete all as specified and directed.

M&L for broken glass coping on top of walls embedded in 25mm thick cement mortar 1:3 complete all as specified and as directed. Note : Broken glass shall be with a rounded or weathered finish and before the mortar has set, glass (of bottle or thick glass) broken to approximately 63mm gauge, shall be firmly embedded at the rate of 10 Kg of glass per square metre of rendered surface, jogged edges of the glass being left projecting.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

S&F for MS framed work as in doors or gates of angle or other sections with gasset plate rails braces etc complete drilled for fixing of steel sheeting or other covering to doors etc to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door etc complete all as specified and as directed.

M&L rendering 15mm thick on fair face of brick work or concrete surface in cement mortar 1:4 by mixing liquid water proofing compound as per manufacturers instructions finished even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and as directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint Apex over and including a coat of alkali resitant primer complete all as specified and as directed.

M/s M S CONSTRUCTION

Ms Kamal Kant Agarwal

M/s Hoti Lal Contractor