PIPELINE INSTALLATION BY HDD METHOD FOR KCPL PH-II OF GAIL

Amount

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Mobilisation/ Demobilisation of pigging tools, tackles, consumables, accessories and personnel by Contractor at work site including but not limited to magnet pigs, electronic geometry pigs and pig tracking device, temporary launcher and receiver as per Specification and other provision of the bid document including supply of material, equipment, manpower, etc. as required for geometry inspection and magnet cleaning in accordance with the EIL Specification B411-000-06-41-EGP-0007: A) Mobilisation B) Demobilisation NOTE: Lumpsum charge is applicable for Mobilization and Demobilization charge only, and not for the entire Magnetic Cleaning and EGP charge.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Magnetic Cleaning: Running of adequate no. of Magnet Pigs for pipeline including pig tracking for each segment, preparation of site report as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Electronic Geometry Pigging: Running of adequate no. of Electronic Geometry Pig (Caliper) including pig tracking for each segment, preparation of site report on pipeline, data analysis at Contractors facility as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Defect Verification: Defect verification at a max. of 3 locations for each segment inspected including supply of all tools, tackles, instruments, personnel and their transportation, all earth work, repair of pipeline coating wherever exposed, backfilling, work complete in all respect as per direction of engineer-in-charge. NOTE: Unit EACH signifies each segment of the pipeline.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Final Report: Preparation of final work report as per agreed format and submission to Client / Client's Consultant in total of 4 copies.

Kaveri River HDD Crossing: CATHODIC PROTECTION || CP System for HDD portion of the pipeline: Survey, design, engineering, supply, installation, testing and commissioning of cathodic protection system to protect the external surface of the HDD section of pipeline as per the enclosed specification vide document no.: B411-000-06-45-CSW-9570, R2. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC including specification no. 6-51-0027, 6-51-0029 and all materials, equipment, consumables, start-up/ commissioning spares etc. which include transportation, storage of materials at site, manpower, in line with the direction of Engineer-in -charge.

Kaveri River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Submission of OFC alignment sheets, as-built drawings and all documentation in accordance with the specifications.

Kaveri River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply & installation of OFC distance markers (metal plates on pipeline markers) at all pipeline marker locations as per specifications and direction of CLIENT/CONSULTANT.

Kaveri River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply of Jointing closures, Factory acceptance testing, storage, and transportation to site, loading, unloading, jointing of OFC all complete as per specifications provided in the bid document and direction of CLIENT/CONSULTANT.

Kaveri River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Site acceptance Testing of the laid OFC, all complete as per specification and direction of CLIENT/CONSULTANT.

Kaveri River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS 24 fibres single mode (18 numbers of ITU-T G.652 fibres & 6 numbers of ITU-T G.655 fibres) Optical Fibre Cable

Kaveri River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Kaveri River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Kaveri River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply and Installation of Jointing pit/ blowing pit, sand, OFC joint identification markers, electronic markers etc. including jointing of OFC (with OFC laid by other contractor at both ends of HDD) in jointing pits, back filling, pulling wire for OFC/Duct Pulling (rugged and durable) etc. all complete

Kaveri River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Installation and Laying of OFC through permanently lubricated HDPE conduit (which is sub-ducted in CS conduit) including supply and use of all materials required like couplers, end plug etc. all complete as per the job specification (Supply & Installation of CS Conduit are covered in the Pipeline laying Section of the tender)

Kaveri River HDD Crossing: PIPELINES || INSTALLATION OF PIPELINE BY TRENCHLESS TECHNIQUE (USING HORIZONTAL DIRECTIONAL DRILLING) Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-70 PSL 2 Pipe OD 610 mm Type of Crossing Waterbody Type of Soil/Strata Hard Rock Crossing Name Kaveri River + Service Road + Kalingarayan Canal Chainage of Crossing 26.337 km Pipe Wall Thickness 12.7 mm

Kaveri River HDD Crossing: PIPELINES || PERMANENT MARKERS Type of Marker Pipeline Warning Marker

Kaveri River HDD Crossing: PIPELINES || LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) Type of Leak Major Leak (detected by visual method) Pipe OD 610 mm

Kaveri River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Kaveri River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Kaveri River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Kaveri River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Kaveri River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Kaveri River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Kaveri River HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Dewatering Pipe OD 610 mm

Kaveri River HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Swabbing Pipe OD 610 mm

Kaveri River HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Commissioning Assistance : All works for Commissioning assistance as per details below: Pipe OD 610 mm

Kaveri River HDD Crossing: PIPELINES || VIDEO FILM & PHOTOGRAPHY OF CONSTRUCTION ACTIVITIES Preparation of high resolution video films using drones or equivalent equipment as required (for minim 1 hr.) with audio commentary and Industrial photography covering all aspects/activities of pipeline construction annotated as required, conversion of same to video DVD/ Blue Ray/ USB Drive format, submitting three (3) sets of the same as per details in scope of work document.

Total amount excluding GST for Part-A

GST (CGST&SGST/UTGST or IGST) in percentage (%) on net Total Amount

Description of Work / Item(s)

Amount

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Mobilisation/ Demobilisation of pigging tools, tackles, consumables, accessories and personnel by Contractor at work site including but not limited to magnet pigs, electronic geometry pigs and pig tracking device, temporary launcher and receiver as per Specification and other provision of the bid document including supply of material, equipment, manpower, etc. as required for geometry inspection and magnet cleaning in accordance with the EIL Specification B411-000-06-41-EGP-0007: A) Mobilisation B) Demobilisation NOTE: Lumpsum charge is applicable for Mobilization and Demobilization charge only, and not for the entire Magnetic Cleaning and EGP charge.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Magnetic Cleaning: Running of adequate no. of Magnet Pigs for pipeline including pig tracking for each segment, preparation of site report as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Electronic Geometry Pigging: Running of adequate no. of Electronic Geometry Pig (Caliper) including pig tracking for each segment, preparation of site report on pipeline, data analysis at Contractors facility as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Defect Verification: Defect verification at a max. of 3 locations for each segment inspected including supply of all tools, tackles, instruments, personnel and their transportation, all earth work, repair of pipeline coating wherever exposed, backfilling, work complete in all respect as per direction of engineer-in-charge. NOTE: Unit EACH signifies each segment of the pipeline.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Final Report: Preparation of final work report as per agreed format and submission to Client / Client's Consultant in total of 4 copies.

Lower Bhavani Canal HDD Crossing: CATHODIC PROTECTION || CP System for HDD portion of the pipeline: Survey, design, engineering, supply, installation, testing and commissioning of cathodic protection system to protect the external surface of the HDD section of pipeline as per the enclosed specification vide document no.: B411-000-06-45-CSW-9570, R2. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC including specification no. 6-51-0027, 6-51-0029 and all materials, equipment, consumables, start-up/ commissioning spares etc. which include transportation, storage of materials at site, manpower, in line with the direction of Engineer-in -charge.

Lower Bhavani Canal HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Submission of OFC alignment sheets, as-built drawings and all documentation in accordance with the specifications.

Lower Bhavani Canal HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply & installation of OFC distance markers (metal plates on pipeline markers) at all pipeline marker locations as per specifications and direction of CLIENT/CONSULTANT.

Lower Bhavani Canal HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply of Jointing closures, Factory acceptance testing, storage, and transportation to site, loading, unloading, jointing of OFC all complete as per specifications provided in the bid document and direction of CLIENT/CONSULTANT.

Lower Bhavani Canal HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Site acceptance Testing of the laid OFC, all complete as per specification and direction of CLIENT/CONSULTANT.

Lower Bhavani Canal HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS 24 fibres single mode (18 numbers of ITU-T G.652 fibres & 6 numbers of ITU-T G.655 fibres) Optical Fibre Cable

Lower Bhavani Canal HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Lower Bhavani Canal HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Lower Bhavani Canal HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply and Installation of Jointing pit/ blowing pit, sand, OFC joint identification markers, electronic markers etc. including jointing of OFC (with OFC laid by other contractor at both ends of HDD) in jointing pits, back filling, pulling wire for OFC/Duct Pulling (rugged and durable) etc. all complete

Lower Bhavani Canal HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Installation and Laying of OFC through permanently lubricated HDPE conduit (which is sub-ducted in CS conduit) including supply and use of all materials required like couplers, end plug etc. all complete as per the job specification (Supply & Installation of CS Conduit are covered in the Pipeline laying Section of the tender)

Lower Bhavani Canal HDD Crossing: PIPELINES || INSTALLATION OF PIPELINE BY TRENCHLESS TECHNIQUE (USING HORIZONTAL DIRECTIONAL DRILLING) Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-70 PSL 2 Pipe OD 610 mm Type of Crossing Waterbody Type of Soil/Strata Hard Rock Crossing Name Lower Bhavani Canal Chainage of Crossing 42.626 km Pipe Wall Thickness 12.7 mm

Lower Bhavani Canal HDD Crossing: PIPELINES || PERMANENT MARKERS Type of Marker Pipeline Warning Marker

Lower Bhavani Canal HDD Crossing: PIPELINES || LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) Type of Leak Major Leak (detected by visual method) Pipe OD 610 mm

Lower Bhavani Canal HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Lower Bhavani Canal HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Lower Bhavani Canal HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Lower Bhavani Canal HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Lower Bhavani Canal HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Lower Bhavani Canal HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Lower Bhavani Canal HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Dewatering Pipe OD 610 mm

Lower Bhavani Canal HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Swabbing Pipe OD 610 mm

Lower Bhavani Canal HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Commissioning Assistance : All works for Commissioning assistance as per details below: Pipe OD 610 mm

Lower Bhavani Canal HDD Crossing: PIPELINES || VIDEO FILM & PHOTOGRAPHY OF CONSTRUCTION ACTIVITIES Preparation of high resolution video films using drones or equivalent equipment as required (for minim 1 hr.) with audio commentary and Industrial photography covering all aspects/activities of pipeline construction annotated as required, conversion of same to video DVD/ Blue Ray/ USB Drive format, submitting three (3) sets of the same as per details in scope of work document.

Total amount excluding GST for Part-B

GST (CGST&SGST/UTGST or IGST) in percentage (%) on net Total Amount

Description of Work / Item(s)

Amount

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Mobilisation/ Demobilisation of pigging tools, tackles, consumables, accessories and personnel by Contractor at work site including but not limited to magnet pigs, electronic geometry pigs and pig tracking device, temporary launcher and receiver as per Specification and other provision of the bid document including supply of material, equipment, manpower, etc. as required for geometry inspection and magnet cleaning in accordance with the EIL Specification B411-000-06-41-EGP-0007: A) Mobilisation B) Demobilisation NOTE: Lumpsum charge is applicable for Mobilization and Demobilization charge only, and not for the entire Magnetic Cleaning and EGP charge.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Magnetic Cleaning: Running of adequate no. of Magnet Pigs for pipeline including pig tracking for each segment, preparation of site report as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Electronic Geometry Pigging: Running of adequate no. of Electronic Geometry Pig (Caliper) including pig tracking for each segment, preparation of site report on pipeline, data analysis at Contractors facility as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Defect Verification: Defect verification at a max. of 3 locations for each segment inspected including supply of all tools, tackles, instruments, personnel and their transportation, all earth work, repair of pipeline coating wherever exposed, backfilling, work complete in all respect as per direction of engineer-in-charge. NOTE: Unit EACH signifies each segment of the pipeline.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Final Report: Preparation of final work report as per agreed format and submission to Client / Client's Consultant in total of 4 copies.

Nallar River HDD Crossing: CATHODIC PROTECTION || CP System for HDD portion of the pipeline: Survey, design, engineering, supply, installation, testing and commissioning of cathodic protection system to protect the external surface of the HDD section of pipeline as per the enclosed specification vide document no.: B411-000-06-45-CSW-9570, R2. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC including specification no. 6-51-0027, 6-51-0029 and all materials, equipment, consumables, start-up/ commissioning spares etc. which include transportation, storage of materials at site, manpower, in line with the direction of Engineer-in -charge.

Nallar River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Submission of OFC alignment sheets, as-built drawings and all documentation in accordance with the specifications.

Nallar River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply & installation of OFC distance markers (metal plates on pipeline markers) at all pipeline marker locations as per specifications and direction of CLIENT/CONSULTANT.

Nallar River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply of Jointing closures, Factory acceptance testing, storage, and transportation to site, loading, unloading, jointing of OFC all complete as per specifications provided in the bid document and direction of CLIENT/CONSULTANT.

Nallar River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Site acceptance Testing of the laid OFC, all complete as per specification and direction of CLIENT/CONSULTANT.

Nallar River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS 24 fibres single mode (18 numbers of ITU-T G.652 fibres & 6 numbers of ITU-T G.655 fibres) Optical Fibre Cable

Nallar River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Nallar River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Nallar River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply and Installation of Jointing pit/ blowing pit, sand, OFC joint identification markers, electronic markers etc. including jointing of OFC (with OFC laid by other contractor at both ends of HDD) in jointing pits, back filling, pulling wire for OFC/Duct Pulling (rugged and durable) etc. all complete

Nallar River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Installation and Laying of OFC through permanently lubricated HDPE conduit (which is sub-ducted in CS conduit) including supply and use of all materials required like couplers, end plug etc. all complete as per the job specification (Supply & Installation of CS Conduit are covered in the Pipeline laying Section of the tender)

Nallar River HDD Crossing: PIPELINES || INSTALLATION OF PIPELINE BY TRENCHLESS TECHNIQUE (USING HORIZONTAL DIRECTIONAL DRILLING) Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-70 PSL 2 Pipe OD 610 mm Type of Crossing Waterbody Type of Soil/Strata Hard Rock Crossing Name Nallar River Chainage of Crossing 87.453 km Pipe Wall Thickness 12.7 mm

Nallar River HDD Crossing: PIPELINES || PERMANENT MARKERS Type of Marker Pipeline Warning Marker

Nallar River HDD Crossing: PIPELINES || LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) Type of Leak Major Leak (detected by visual method) Pipe OD 610 mm

Nallar River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Nallar River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Nallar River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Nallar River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Nallar River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Nallar River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Nallar River HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Dewatering Pipe OD 610 mm

Nallar River HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Swabbing Pipe OD 610 mm

Nallar River HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Commissioning Assistance : All works for Commissioning assistance as per details below: Pipe OD 610 mm

Nallar River HDD Crossing: PIPELINES || VIDEO FILM & PHOTOGRAPHY OF CONSTRUCTION ACTIVITIES Preparation of high resolution video films using drones or equivalent equipment as required (for minim 1 hr.) with audio commentary and Industrial photography covering all aspects/activities of pipeline construction annotated as required, conversion of same to video DVD/ Blue Ray/ USB Drive format, submitting three (3) sets of the same as per details in scope of work document.

Total amount excluding GST for Part-C

GST (CGST&SGST/UTGST or IGST) in percentage (%) on net Total Amount

Description of Work / Item(s)

Amount

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Mobilisation/ Demobilisation of pigging tools, tackles, consumables, accessories and personnel by Contractor at work site including but not limited to magnet pigs, electronic geometry pigs and pig tracking device, temporary launcher and receiver as per Specification and other provision of the bid document including supply of material, equipment, manpower, etc. as required for geometry inspection and magnet cleaning in accordance with the EIL Specification B411-000-06-41-EGP-0007: A) Mobilisation B) Demobilisation NOTE: Lumpsum charge is applicable for Mobilization and Demobilization charge only, and not for the entire Magnetic Cleaning and EGP charge.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Magnetic Cleaning: Running of adequate no. of Magnet Pigs for pipeline including pig tracking for each segment, preparation of site report as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Electronic Geometry Pigging: Running of adequate no. of Electronic Geometry Pig (Caliper) including pig tracking for each segment, preparation of site report on pipeline, data analysis at Contractors facility as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Defect Verification: Defect verification at a max. of 3 locations for each segment inspected including supply of all tools, tackles, instruments, personnel and their transportation, all earth work, repair of pipeline coating wherever exposed, backfilling, work complete in all respect as per direction of engineer-in-charge. NOTE: Unit EACH signifies each segment of the pipeline.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Final Report: Preparation of final work report as per agreed format and submission to Client / Client's Consultant in total of 4 copies.

Railway HDD Crossing - 1: CATHODIC PROTECTION || CP System for HDD portion of the pipeline: Survey, design, engineering, supply, installation, testing and commissioning of cathodic protection system to protect the external surface of the HDD section of pipeline as per the enclosed specification vide document no.: B411-000-06-45-CSW-9570, R2. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC including specification no. 6-51-0027, 6-51-0029 and all materials, equipment, consumables, start-up/ commissioning spares etc. which include transportation, storage of materials at site, manpower, in line with the direction of Engineer-in -charge.

Railway HDD Crossing - 1: INSTRUMENTATION || TELECOMMUNICATION WORKS Submission of OFC alignment sheets, as-built drawings and all documentation in accordance with the specifications.

Railway HDD Crossing - 1: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply & installation of OFC distance markers (metal plates on pipeline markers) at all pipeline marker locations as per specifications and direction of CLIENT/CONSULTANT.

Railway HDD Crossing - 1: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply of Jointing closures, Factory acceptance testing, storage, and transportation to site, loading, unloading, jointing of OFC all complete as per specifications provided in the bid document and direction of CLIENT/CONSULTANT.

Railway HDD Crossing - 1: INSTRUMENTATION || TELECOMMUNICATION WORKS Site acceptance Testing of the laid OFC, all complete as per specification and direction of CLIENT/CONSULTANT.

Railway HDD Crossing - 1: INSTRUMENTATION || TELECOMMUNICATION WORKS 24 fibres single mode (18 numbers of ITU-T G.652 fibres & 6 numbers of ITU-T G.655 fibres) Optical Fibre Cable

Railway HDD Crossing - 1: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Railway HDD Crossing - 1: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Railway HDD Crossing - 1: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply and Installation of Jointing pit/ blowing pit, sand, OFC joint identification markers, electronic markers etc. including jointing of OFC (with OFC laid by other contractor at both ends of HDD) in jointing pits, back filling, pulling wire for OFC/Duct Pulling (rugged and durable) etc. all complete

Railway HDD Crossing - 1: INSTRUMENTATION || TELECOMMUNICATION WORKS Installation and Laying of OFC through permanently lubricated HDPE conduit (which is sub-ducted in CS conduit) including supply and use of all materials required like couplers, end plug etc. all complete as per the job specification (Supply & Installation of CS Conduit are covered in the Pipeline laying Section of the tender)

Railway HDD Crossing - 1: PIPELINES || INSTALLATION OF PIPELINE BY TRENCHLESS TECHNIQUE (USING HORIZONTAL DIRECTIONAL DRILLING) Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-70 PSL 2 Pipe OD 610 mm Type of Crossing Railway Type of Soil/Strata Hard Rock Crossing Name Southern Railway Erode Irugur Section (From Sulur RS to Irugur RS) Chainage of Crossing 118.987 km Pipe Wall Thickness 15.5 mm

Railway HDD Crossing - 1: PIPELINES || PERMANENT MARKERS Type of Marker Pipeline Warning Marker

Railway HDD Crossing - 1: PIPELINES || LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) Type of Leak Major Leak (detected by visual method) Pipe OD 610 mm

Railway HDD Crossing - 1: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Railway HDD Crossing - 1: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Railway HDD Crossing - 1: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Railway HDD Crossing - 1: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Railway HDD Crossing - 1: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Railway HDD Crossing - 1: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Railway HDD Crossing - 1: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Dewatering Pipe OD 610 mm

Railway HDD Crossing - 1: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Swabbing Pipe OD 610 mm

Railway HDD Crossing - 1: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Commissioning Assistance : All works for Commissioning assistance as per details below: Pipe OD 610 mm

Railway HDD Crossing - 1: PIPELINES || VIDEO FILM & PHOTOGRAPHY OF CONSTRUCTION ACTIVITIES Preparation of high resolution video films using drones or equivalent equipment as required (for minim 1 hr.) with audio commentary and Industrial photography covering all aspects/activities of pipeline construction annotated as required, conversion of same to video DVD/ Blue Ray/ USB Drive format, submitting three (3) sets of the same as per details in scope of work document.

Total amount excluding GST for Part-D

GST (CGST&SGST/UTGST or IGST) in percentage (%) on net Total Amount

Description of Work / Item(s)

Amount

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Mobilisation/ Demobilisation of pigging tools, tackles, consumables, accessories and personnel by Contractor at work site including but not limited to magnet pigs, electronic geometry pigs and pig tracking device, temporary launcher and receiver as per Specification and other provision of the bid document including supply of material, equipment, manpower, etc. as required for geometry inspection and magnet cleaning in accordance with the EIL Specification B411-000-06-41-EGP-0007: A) Mobilisation B) Demobilisation NOTE: Lumpsum charge is applicable for Mobilization and Demobilization charge only, and not for the entire Magnetic Cleaning and EGP charge.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Magnetic Cleaning: Running of adequate no. of Magnet Pigs for pipeline including pig tracking for each segment, preparation of site report as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Electronic Geometry Pigging: Running of adequate no. of Electronic Geometry Pig (Caliper) including pig tracking for each segment, preparation of site report on pipeline, data analysis at Contractors facility as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Defect Verification: Defect verification at a max. of 3 locations for each segment inspected including supply of all tools, tackles, instruments, personnel and their transportation, all earth work, repair of pipeline coating wherever exposed, backfilling, work complete in all respect as per direction of engineer-in-charge. NOTE: Unit EACH signifies each segment of the pipeline.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Final Report: Preparation of final work report as per agreed format and submission to Client / Client's Consultant in total of 4 copies.

Noyil River HDD Crossing: CATHODIC PROTECTION || CP System for HDD portion of the pipeline: Survey, design, engineering, supply, installation, testing and commissioning of cathodic protection system to protect the external surface of the HDD section of pipeline as per the enclosed specification vide document no.: B411-000-06-45-CSW-9570, R2. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC including specification no. 6-51-0027, 6-51-0029 and all materials, equipment, consumables, start-up/ commissioning spares etc. which include transportation, storage of materials at site, manpower, in line with the direction of Engineer-in -charge.

Noyil River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Submission of OFC alignment sheets, as-built drawings and all documentation in accordance with the specifications.

Noyil River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply & installation of OFC distance markers (metal plates on pipeline markers) at all pipeline marker locations as per specifications and direction of CLIENT/CONSULTANT.

Noyil River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply of Jointing closures, Factory acceptance testing, storage, and transportation to site, loading, unloading, jointing of OFC all complete as per specifications provided in the bid document and direction of CLIENT/CONSULTANT.

Noyil River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Site acceptance Testing of the laid OFC, all complete as per specification and direction of CLIENT/CONSULTANT.

Noyil River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS 24 fibres single mode (18 numbers of ITU-T G.652 fibres & 6 numbers of ITU-T G.655 fibres) Optical Fibre Cable

Noyil River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Noyil River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Noyil River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply and Installation of Jointing pit/ blowing pit, sand, OFC joint identification markers, electronic markers etc. including jointing of OFC (with OFC laid by other contractor at both ends of HDD) in jointing pits, back filling, pulling wire for OFC/Duct Pulling (rugged and durable) etc. all complete

Noyil River HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Installation and Laying of OFC through permanently lubricated HDPE conduit (which is sub-ducted in CS conduit) including supply and use of all materials required like couplers, end plug etc. all complete as per the job specification (Supply & Installation of CS Conduit are covered in the Pipeline laying Section of the tender)

Noyil River HDD Crossing: PIPELINES || INSTALLATION OF PIPELINE BY TRENCHLESS TECHNIQUE (USING HORIZONTAL DIRECTIONAL DRILLING) Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-70 PSL 2 Pipe OD 610 mm Type of Crossing Waterbody Type of Soil/Strata Hard Rock Crossing Name Noyil River Chainage of Crossing 120.415 km Pipe Wall Thickness 12.7 mm

Noyil River HDD Crossing: PIPELINES || PERMANENT MARKERS Type of Marker Pipeline Warning Marker

Noyil River HDD Crossing: PIPELINES || LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) Type of Leak Major Leak (detected by visual method) Pipe OD 610 mm

Noyil River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Noyil River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Noyil River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Noyil River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Noyil River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Noyil River HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Noyil River HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Dewatering Pipe OD 610 mm

Noyil River HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Swabbing Pipe OD 610 mm

Noyil River HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Commissioning Assistance : All works for Commissioning assistance as per details below: Pipe OD 610 mm

Noyil River HDD Crossing: PIPELINES || VIDEO FILM & PHOTOGRAPHY OF CONSTRUCTION ACTIVITIES Preparation of high resolution video films using drones or equivalent equipment as required (for minim 1 hr.) with audio commentary and Industrial photography covering all aspects/activities of pipeline construction annotated as required, conversion of same to video DVD/ Blue Ray/ USB Drive format, submitting three (3) sets of the same as per details in scope of work document.

Total amount excluding GST for Part-E

GST (CGST&SGST/UTGST or IGST) in percentage (%) on net Total Amount

Description of Work / Item(s)

Amount

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Mobilisation/ Demobilisation of pigging tools, tackles, consumables, accessories and personnel by Contractor at work site including but not limited to magnet pigs, electronic geometry pigs and pig tracking device, temporary launcher and receiver as per Specification and other provision of the bid document including supply of material, equipment, manpower, etc. as required for geometry inspection and magnet cleaning in accordance with the EIL Specification B411-000-06-41-EGP-0007: A) Mobilisation B) Demobilisation NOTE: Lumpsum charge is applicable for Mobilization and Demobilization charge only, and not for the entire Magnetic Cleaning and EGP charge.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Magnetic Cleaning: Running of adequate no. of Magnet Pigs for pipeline including pig tracking for each segment, preparation of site report as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Electronic Geometry Pigging: Running of adequate no. of Electronic Geometry Pig (Caliper) including pig tracking for each segment, preparation of site report on pipeline, data analysis at Contractors facility as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Defect Verification: Defect verification at a max. of 3 locations for each segment inspected including supply of all tools, tackles, instruments, personnel and their transportation, all earth work, repair of pipeline coating wherever exposed, backfilling, work complete in all respect as per direction of engineer-in-charge. NOTE: Unit EACH signifies each segment of the pipeline.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Final Report: Preparation of final work report as per agreed format and submission to Client / Client's Consultant in total of 4 copies.

Railway HDD Crossing - 2: CATHODIC PROTECTION || CP System for HDD portion of the pipeline: Survey, design, engineering, supply, installation, testing and commissioning of cathodic protection system to protect the external surface of the HDD section of pipeline as per the enclosed specification vide document no.: B411-000-06-45-CSW-9570, R2. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC including specification no. 6-51-0027, 6-51-0029 and all materials, equipment, consumables, start-up/ commissioning spares etc. which include transportation, storage of materials at site, manpower, in line with the direction of Engineer-in -charge.

Railway HDD Crossing - 2: INSTRUMENTATION || TELECOMMUNICATION WORKS Submission of OFC alignment sheets, as-built drawings and all documentation in accordance with the specifications.

Railway HDD Crossing - 2: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply & installation of OFC distance markers (metal plates on pipeline markers) at all pipeline marker locations as per specifications and direction of CLIENT/CONSULTANT.

Railway HDD Crossing - 2: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply of Jointing closures, Factory acceptance testing, storage, and transportation to site, loading, unloading, jointing of OFC all complete as per specifications provided in the bid document and direction of CLIENT/CONSULTANT.

Railway HDD Crossing - 2: INSTRUMENTATION || TELECOMMUNICATION WORKS Site acceptance Testing of the laid OFC, all complete as per specification and direction of CLIENT/CONSULTANT.

Railway HDD Crossing - 2: INSTRUMENTATION || TELECOMMUNICATION WORKS 24 fibres single mode (18 numbers of ITU-T G.652 fibres & 6 numbers of ITU-T G.655 fibres) Optical Fibre Cable

Railway HDD Crossing - 2: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Railway HDD Crossing - 2: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Railway HDD Crossing - 2: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply and Installation of Jointing pit/ blowing pit, sand, OFC joint identification markers, electronic markers etc. including jointing of OFC (with OFC laid by other contractor at both ends of HDD) in jointing pits, back filling, pulling wire for OFC/Duct Pulling (rugged and durable) etc. all complete

Railway HDD Crossing - 2: INSTRUMENTATION || TELECOMMUNICATION WORKS Installation and Laying of OFC through permanently lubricated HDPE conduit (which is sub-ducted in CS conduit) including supply and use of all materials required like couplers, end plug etc. all complete as per the job specification (Supply & Installation of CS Conduit are covered in the Pipeline laying Section of the tender)

Railway HDD Crossing - 2: PIPELINES || INSTALLATION OF PIPELINE BY TRENCHLESS TECHNIQUE (USING HORIZONTAL DIRECTIONAL DRILLING) Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-70 PSL 2 Pipe OD 610 mm Type of Crossing Railway Type of Soil/Strata Hard Rock Crossing Name Southern Railway Line (From Chettipalaiyam RS to Podanur RS) Chainage of Crossing 130.433 km Pipe Wall Thickness 15.5 mm

Railway HDD Crossing - 2: PIPELINES || PERMANENT MARKERS Type of Marker Pipeline Warning Marker

Railway HDD Crossing - 2: PIPELINES || LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) Type of Leak Major Leak (detected by visual method) Pipe OD 610 mm

Railway HDD Crossing - 2: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Railway HDD Crossing - 2: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Railway HDD Crossing - 2: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Railway HDD Crossing - 2: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Railway HDD Crossing - 2: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Railway HDD Crossing - 2: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Railway HDD Crossing - 2: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Dewatering Pipe OD 610 mm

Railway HDD Crossing - 2: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Swabbing Pipe OD 610 mm

Railway HDD Crossing - 2: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Commissioning Assistance : All works for Commissioning assistance as per details below: Pipe OD 610 mm

Railway HDD Crossing - 2: PIPELINES || VIDEO FILM & PHOTOGRAPHY OF CONSTRUCTION ACTIVITIES Preparation of high resolution video films using drones or equivalent equipment as required (for minim 1 hr.) with audio commentary and Industrial photography covering all aspects/activities of pipeline construction annotated as required, conversion of same to video DVD/ Blue Ray/ USB Drive format, submitting three (3) sets of the same as per details in scope of work document.

Total amount excluding GST for Part-F

GST (CGST&SGST/UTGST or IGST) in percentage (%) on net Total Amount

Description of Work / Item(s)

Amount

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Mobilisation/ Demobilisation of pigging tools, tackles, consumables, accessories and personnel by Contractor at work site including but not limited to magnet pigs, electronic geometry pigs and pig tracking device, temporary launcher and receiver as per Specification and other provision of the bid document including supply of material, equipment, manpower, etc. as required for geometry inspection and magnet cleaning in accordance with the EIL Specification B411-000-06-41-EGP-0007: A) Mobilisation B) Demobilisation NOTE: Lumpsum charge is applicable for Mobilization and Demobilization charge only, and not for the entire Magnetic Cleaning and EGP charge.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Magnetic Cleaning: Running of adequate no. of Magnet Pigs for pipeline including pig tracking for each segment, preparation of site report as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Electronic Geometry Pigging: Running of adequate no. of Electronic Geometry Pig (Caliper) including pig tracking for each segment, preparation of site report on pipeline, data analysis at Contractors facility as per Specification and provisions of the bid document.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Defect Verification: Defect verification at a max. of 3 locations for each segment inspected including supply of all tools, tackles, instruments, personnel and their transportation, all earth work, repair of pipeline coating wherever exposed, backfilling, work complete in all respect as per direction of engineer-in-charge. NOTE: Unit EACH signifies each segment of the pipeline.

Magnetic Cleaning & EGP: METALLIC MATERIALS AND CORROSION || Magnetic Cleaning and Electronic Geometry Pigging Final Report: Preparation of final work report as per agreed format and submission to Client / Client's Consultant in total of 4 copies.

Thoppur Toll Plaza HDD Crossing: CATHODIC PROTECTION || CP System for HDD portion of the pipeline: Survey, design, engineering, supply, installation, testing and commissioning of cathodic protection system to protect the external surface of the HDD section of pipeline as per the enclosed specification vide document no.: B411-000-06-45-CSW-9570, R2. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC including specification no. 6-51-0027, 6-51-0029 and all materials, equipment, consumables, start-up/ commissioning spares etc. which include transportation, storage of materials at site, manpower, in line with the direction of Engineer-in -charge.

Thoppur Toll Plaza HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Submission of OFC alignment sheets, as-built drawings and all documentation in accordance with the specifications.

Thoppur Toll Plaza HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply & installation of OFC distance markers (metal plates on pipeline markers) at all pipeline marker locations as per specifications and direction of CLIENT/CONSULTANT.

Thoppur Toll Plaza HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply of Jointing closures, Factory acceptance testing, storage, and transportation to site, loading, unloading, jointing of OFC all complete as per specifications provided in the bid document and direction of CLIENT/CONSULTANT.

Thoppur Toll Plaza HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Site acceptance Testing of the laid OFC, all complete as per specification and direction of CLIENT/CONSULTANT.

Thoppur Toll Plaza HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS 24 fibres single mode (18 numbers of ITU-T G.652 fibres & 6 numbers of ITU-T G.655 fibres) Optical Fibre Cable

Thoppur Toll Plaza HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Thoppur Toll Plaza HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Duct with nominal diameter 40 mm or less

Thoppur Toll Plaza HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Supply and Installation of Jointing pit/ blowing pit, sand, OFC joint identification markers, electronic markers etc. including jointing of OFC (with OFC laid by other contractor at both ends of HDD) in jointing pits, back filling, pulling wire for OFC/Duct Pulling (rugged and durable) etc. all complete

Thoppur Toll Plaza HDD Crossing: INSTRUMENTATION || TELECOMMUNICATION WORKS Installation and Laying of OFC through permanently lubricated HDPE conduit (which is sub-ducted in CS conduit) including supply and use of all materials required like couplers, end plug etc. all complete as per the job specification (Supply & Installation of CS Conduit are covered in the Pipeline laying Section of the tender)

Thoppur Toll Plaza HDD Crossing: PIPELINES || INSTALLATION OF PIPELINE BY TRENCHLESS TECHNIQUE (USING HORIZONTAL DIRECTIONAL DRILLING) Scope of Work Installation of Pipeline (Line Pipe Free issue from Owner) Pipe Material Grade API 5L Gr. X-70 PSL 2 Pipe OD 610 mm Type of Crossing Any Other Type of Soil/Strata Hard Strata (Soft Rock/ Murrum / Weathered Rock etc.) Crossing Name THOPPUR TOLL PLAZA Chainage of Crossing 77.073 km Pipe Wall Thickness 12.7 mm

Thoppur Toll Plaza HDD Crossing: PIPELINES || PERMANENT MARKERS Type of Marker Pipeline Warning Marker

Thoppur Toll Plaza HDD Crossing: PIPELINES || LEAKS/ BURSTS (ATTRIBUTABLE TO OWNER) Type of Leak Major Leak (detected by visual method) Pipe OD 610 mm

Thoppur Toll Plaza HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Thoppur Toll Plaza HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Thoppur Toll Plaza HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Corrosion Inhibited Water Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Thoppur Toll Plaza HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period Up to 3 Month

Thoppur Toll Plaza HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 3 to 6 Month

Thoppur Toll Plaza HDD Crossing: PIPELINES || IDLE TIME PRESERVATION WORKS Type of Preservation By Filling Nitrogen Pressure (Bar(g)) 2.0 Pipe OD 610 mm Period 6 to 9 Month

Thoppur Toll Plaza HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Dewatering Pipe OD 610 mm

Thoppur Toll Plaza HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Pre-Commissioning Works as per details: Type of Activity Swabbing Pipe OD 610 mm

Thoppur Toll Plaza HDD Crossing: PIPELINES || PRE-COMMISSIONING AND COMMISSIONING ASSISTANCE FOR PIPELINES Commissioning Assistance : All works for Commissioning assistance as per details below: Pipe OD 610 mm

Thoppur Toll Plaza HDD Crossing: PIPELINES || VIDEO FILM & PHOTOGRAPHY OF CONSTRUCTION ACTIVITIES Preparation of high resolution video films using drones or equivalent equipment as required (for minim 1 hr.) with audio commentary and Industrial photography covering all aspects/activities of pipeline construction annotated as required, conversion of same to video DVD/ Blue Ray/ USB Drive format, submitting three (3) sets of the same as per details in scope of work document.

Total amount excluding GST for Part-G

GST (CGST&SGST/UTGST or IGST) in percentage (%) on net Total Amount

ATINDRA CONSTRUCTION PRIVATE LIMITED

NRP PROJECTS PRIVATE LIMITED

NEXT LEVEL PROJECTS PRIVATE LIMITED

KRITA ENGINEERING PVT LTD

Mansi Ganga Builders and Engineers Pvt Ltd

PLN Construction Ltd

Mideast Pipeline Products

ANERI CONSTRUCTION PRIVATE LIMITED

Taurant Projects Ltd

NEXT LEVEL PROJECTS PRIVATE LIMITED

RICKY INFRACON PVT LTD

KRITA ENGINEERING PVT LTD

Mideast Pipeline Products

ANERI CONSTRUCTION PRIVATE LIMITED

PLN Construction Ltd

Taurant Projects Ltd

Mansi Ganga Builders and Engineers Pvt Ltd

NRP PROJECTS PRIVATE LIMITED

ATINDRA CONSTRUCTION PRIVATE LIMITED

Taurant Projects Ltd

RICKY INFRACON PVT LTD

KRITA ENGINEERING PVT LTD

Mideast Pipeline Products

ANERI CONSTRUCTION PRIVATE LIMITED

Mansi Ganga Builders and Engineers Pvt Ltd

PLN Construction Ltd

NRP PROJECTS PRIVATE LIMITED

RICKY INFRACON PVT LTD

KRITA ENGINEERING PVT LTD

Taurant Projects Ltd

ATINDRA CONSTRUCTION PRIVATE LIMITED

Mideast Pipeline Products

ANERI CONSTRUCTION PRIVATE LIMITED

PLN Construction Ltd

NRP PROJECTS PRIVATE LIMITED

Mansi Ganga Builders and Engineers Pvt Ltd

Taurant Projects Ltd

RICKY INFRACON PVT LTD

KRITA ENGINEERING PVT LTD

ATINDRA CONSTRUCTION PRIVATE LIMITED

Mideast Pipeline Products

ANERI CONSTRUCTION PRIVATE LIMITED

Mansi Ganga Builders and Engineers Pvt Ltd

PLN Construction Ltd

NRP PROJECTS PRIVATE LIMITED

ATINDRA CONSTRUCTION PRIVATE LIMITED

KRITA ENGINEERING PVT LTD

Taurant Projects Ltd

ANERI CONSTRUCTION PRIVATE LIMITED

PLN Construction Ltd

RICKY INFRACON PVT LTD

Mansi Ganga Builders and Engineers Pvt Ltd

Mideast Pipeline Products

NRP PROJECTS PRIVATE LIMITED

ATINDRA CONSTRUCTION PRIVATE LIMITED

KRITA ENGINEERING PVT LTD

RICKY INFRACON PVT LTD

ANERI CONSTRUCTION PRIVATE LIMITED

PLN Construction Ltd

NRP PROJECTS PRIVATE LIMITED

Mideast Pipeline Products

Taurant Projects Ltd

Mansi Ganga Builders and Engineers Pvt Ltd