SPECIAL REPAIR TO ROOF OF BLDG NO IAS-15 AND PROVN OF HARDSTANDING FOR VITANGE TANKS / WARS TROPHIES HELD AT F COMBAT AT CME PUNE

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Demolition of Concrete of any description and in any position not otherwise specifically provided

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed. Note: The sheet shall be of Mangalore tile pattern

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

S&F Framed work such as roof trusses(framed), trusses purlins, crane gantries , rails and fastenings and heavy bracket framing(beam, tee, angle, channel or flat sections) including welding and distance pieces, cleats etc Fe-410-W(Gde E-250) Quality A complete all as specified and directed.,

S&F rolled sections as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc Fe-410-W(Gde E-250) Quality A complete all as specified and directed.

M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W(Gde E-250) Quality A all as specified and directed.

Mild steel rag or lewis bolts, 20 mm dia screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30 cm long

M&L Preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a of red oxide primer complete all as specified and directed

M & L cutting hole in stone walls exc one brick but not exc 150 sqm superficial areafor any perpose and making good dismantled position in cement mortor 1:3 or cement concret 1:2:4 type B-1 as required complete all as specified and directed by Engineer-in Charge.

M & L type B1 1:2:4 (20mm aggregate) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges

M & L for complete scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, moss efflorecent salts and applying complete wall with 3mm POP/Birla putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer all as specified and directed by Engineer-in-Charge.

M & L for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work.

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

Taking down ceiling fan any size or any type and deposited to AGE E/M store for repair / painting complete all as specified and directed.

M&L for point wiring for light/fan/Bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick and 20mm width PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface type with PVC Modular Plate Cover for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed as following :-

(a) One light point controlled by one one way switch.

(b) One fan point controlled by one way switch and one regulator.

S&F switch Switch piano, flush type single pole, one way 6 Amp complete all as specified and directed.

S & F ceiling rose, 3 phase PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Re-Fixing ceiling fan any size and any type, after cleaning and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F Anti Suicide Fan rod including drilling, cutting, threading for ceiling fan 1200/1400mm sweep of length 18" complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Taking down carefully keeping in safe custody for refixing LED luminaire 600 mm x 600 mm, Any watt, recessed type including three core flexible copper conductor cases of suitable size complete all as specified and directed by engr-in-charge.

Supply & fix LED fitting for Bldg security, 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete. including conncting with 1.5 sq mm copper condector 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts and necessary GI bracket made of 32 mm light grade GI pipe of 1 mtr lenth with necessary bending complete all as specified and directed

M&L for excavation in trenches in soft/loose soil, n exc 1.5 m wide and nexc1.50 m depth for foundations etc.and getting out in any type of soil soil etc complete all as specified & directed.

M& L For Cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete etc. complete as directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed

M & L for Walling of Block-in-course masonry well bonded above GL, built in, built in CM 1:6 complete all as specified and directed

Returning, filling in , including spreading, levelling watering and well ramming in layer not exc 25 cm in soft loose soil complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M & L 10mm thick rendering concrete surfaces in CM 1:6 with finished the surface even & smooth without using extra cement incl dubbing coat etc. Complete as directed.

M&L for Flush pointing to block in course or ashlar masonry or concrete block walling Complete as directed.

M & L Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified & directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and diretced

Ditto as Item No 37 above but 6 mm to 8 mm dia bars as in distribution

M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for in stirrups, spacers and binders complete all as specified

M& L RCC 1:2:4 type B1 using 20 mm graded aggregatein lintels bands and other similar bands, etc copings, incld necessary formwork complete all as specified Note Reinforcement shall be measured and paid seperatly.

M&L for 100 mm thick PCC type D-2 (1:3:6) using 20 mm graded aggregate as in sub base etc complete all as specified and directed

M& L for 100mm thick Cement concrete type b-2, 1:2:4 (40mm graded aggregate) as in floor complete all as specified and directed

M& L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and diretced

S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F steel work of grade Fe - 410 W ( Gde E -250) quality B mild steel plates (plain or chequered) 5 mm or over in thickness in available sizes complete all as specified and as directed.

Supply and laying 40 mm stone aggregate in floors

M&L machine cut kota stone slab 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.