PROVN OF 04 X TRG SHED (SIZE LENGTH- 20 MTR, WIDTH- 6 MTR) BEHIND IPMS BLDG. NO P-132 OF NO 2TT WG UNDER GE (EAST) LUCKNOW

Amount

Excavating in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil, each not exc 0.5 cum (0.55mX0.55mX1.5m deep), getting out, and removing soil to a distance not exc 50m complete all as specified and directed.

M&L for sand filling under floor spreading and levelling in layers not exc 25 cm thick for well ramming watering as required complete all as specified and directed .

M&L for hard core broken bricks of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, water and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling, sub base and mass concrete filling, etc complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in foundation/footing of post holes complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in floors / pavings complete all as specified and directed.

M&L for 20-25mm thick machine cut kota sotne slab, over and including 15mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.

M&L for 20-25mm thick machine cut kota sotne slab in skirting / steps / risers over & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.

M&L of anodized aluminium snap grid size 605x605mm of frame work for false ceiling complete all as specified and directed.

S&F of 4 mm thick E-board of size 600 mm x 600 mm and 4 mm thick, white prelaminated sett embosed reinforced designer as approved ceiling board/tiles at any height complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM1:4, finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on other than fair faces of brick work in CM1:6, finished even and smooth without using extra cement complete all as specified and directed

S&F roof trusses (framed ) trussed purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle, channel or flat section ) including distance pipe, cleats conforming to Fe-290 (Gde 165-E) etc complete all as specified and directed.

M&L for steel work as in tubular trusses incl special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-11979 Gde St 240 complete all as specified and directed.

S&F framed work as in doors or gates of agnle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering rails and guides) and hanging also fastening and fixing conforming to Fe-290 (Gde E-165) etc complete all as specified and directed.

S&F MS Screw bolts 12mm dia (Machine Made ) with hexagonal or square heads at one end and screwed at the other end or screwed both ends,each screwed end to be fitted with washers and one end hexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt not exc 5 cm long complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all incl fixing bracket suitable for galvalume sheet profile complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layer not exc. 25 thick complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified and directed.

M&L of three coat of white washing on newly plastered wall surfaces including preparation of surfaces complete all as specified and directed.

M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement with grey cement and pigment over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 28 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 28 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Serial Item No 28 here-in-before but point wiring with 2.5 sqmm single core FRLS cables and earth continuity wire of 1.5 sqmm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board

Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.

Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Supply and fix of recessed mounted 2'x2' LED ceiling light fitting 36 watt, 6500K, with IP 20 protection comprises of CRCA housing, high efficiency diffuser cover, electronic driver, etc and all accessories pre-wired including connecting up complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the old unserviceable sub main wiring complete all as specified & directed.

Supply and fix of sheet metal enclosure distribution board, double door, three pole and neutral, AC, 240 volt, 04 way, with 415 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing MCB TPN 63 Amps 240 V, C- curve, 50 Hz, breaking capacity-10 kA. complete all as specified and directed.

Supply and fix of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing MCB SPN 32 Amps 240 V, C- curve, 50 Hz, breaking capacity-10 kA. complete all as specified and directed.

Supply and fixing MCB SP 6-32 Amps240 V, C- curve, 50 Hz, breaking capacity-10 kA . complete all as specified and directed

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade complete all as shown in elect plate No 3 SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4.0 core complete all as specified and directed.

Excavation in trenches soft/loose soil not exc 1.5 m wide and not exc 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed & specified

M&L for returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete all as specified and as directed

M&L removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed

Supplying and filling in trenches, spreading, leveling of sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. i.e 18 cm punned down thick shall be considerd for mesurement)

M&L for old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable, adjacent/abutting each other complete all as specified and directed.

M/s Bhadoria Associates

QUALITY CONSTRUCTIONS CO

ANIL CONSTRUCTION

M/S KAUSHIK CONSTRUCTION

M/S S S A ASSOCIATES

M/S SHIVA CONSTRUCTION

M/s Rathore Traders