Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.9 Cr
EMD Value
₹5.9 L
Closing Date
1 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
SR.DEN 1
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
Experience in similar nature of work :- (a) The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.),tenderer must have successfully completed any of the following during last 07 (seven) years,ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(i): Separate completed works of minimum required values for each component shall also be considered for fulfillment of technical eligibility criteria.(b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre defined with estimated tender cost of it, as part of the tender documents without any ambiguity.
Defination of Similar Work :- Any Civil Engineering works.
77 conditions · 14 needing a document upload
No post tender correspondence will be done with the participant tenderer(s) for deficient credentials noted during scrutiny of tender/offer nor any credential will be accepted after opening of the tender and the offer shall be decided on the basis of submitted/Credentials downloaded with offer only"
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society/HUF etc. shall be neither asked nor considered, if submitted.Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted
The tenderer/s shall submit a duly filled Tender form as per "ANNEXURE-I" OF STANDARD TENDER DOCUMENT"
In case of other than Company/Proprietary firm, Annexure-V (A) shall be submitted by each member of a Partnership Firm/ Joint Venture (JV)/Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above Certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
The following documents should be specified for submission along with tender:
A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work.
B. List of plant Machinery available on hand own and proposed to be inducted own hired to be given separately for the subject work.
C. The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, Date of actual start, actual completion and final value of contract should also be given.
D. List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
Bid Security: (a)Subject to exemptions provided under para 4(iv)) of this document, the tender must be accompanied by a Bid Security as mentioned in tender documents, failing which the tender shall be summarily rejected. (b)The Tenderer(s) shall keep the offer open for a minimum period of 60 days (in case of two packet system of tendering 90days) from the date of closing of the Tender. It is understood that the tender documents have been issued to the Tenderer(s) and the Tenderer(s), is / are permitted to tender in consideration of the stipulation on his / their part that after submitting his / Their tender subject to the period being extended further, if required by mutual agreement from time to time, he will not resile from his offer or modify the terms and conditions thereof in a manner not acceptable to North East Frontier Railway. Should the tenderer fail to observe or comply with the foregoing stipulation, the amount deposited or Bank guarantee bond submitted as Bid Security for the due performance of the above stipulation, shall be forfeited to the Railway. (c)If his tender is accepted, (i)the Bid Security mentioned in sub para(a) above deposited in cash through e- payment gateway will be retained as part security for the due and faithful fulfillment of the contract in terms of Clause 16 of the Standard General Conditions of Contract; (ii)the Bid Security mentioned in sub para(a) above submitted as Bank guarantee bond, will be encashed as part security for the due and faithful fulfillment of the contract in terms of Clause 16 of the Standard General Conditions of Contract. The Bid Security of other Tenderers shall, save as herein before provided, be returned to them, but the Railway shall not be responsible for any loss or depreciation to the Bid Security that may happen thereto while in their possession, nor be liable to pay interest thereon. (d)In case Contractor submits the Term Deposit Receipt/Bank Guarantee Bond towards either the Full Security Depositor the Part Security Deposit equal to or more than Bid Security, the Railway shall return the Bid Security so retained as per sub para(c) above, to the Contractor.
The payment towards earnest money (EMD) against the works tenders should be made as brought out in GCC April 2022, Para 5: (Bid Security) PART I Instructions to Tenderers (ITT) & Para 6 (a to d) of Tender Form (Second Sheet)
Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' and Labour Cooperative Societies shall submit Registration Certificate issued by appropriate authority.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90days beyond the bid validity period
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured:
A scanned copy of the Bank Guarantee shall be uploaded on e- Procurement Portal (IREPS) while applying to the tender.
The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last 6.3.2 date of submission of bids). (Corrigendum: Para 5(3) ii Part I of GCC has been modified vide Advance Correction Slip No. 5 Railway Board's letter no. 2022/CE-l/CT/GCC-2022/Policy Dated 20.10.2023)
Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original 6.3.3 Bank Guarantee within the specified period shall lead to summary rejection of bid.
The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender.
The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, FAILING WHICH THE BID WILL BE REJECTED.
The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid 6.3.6 for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope.
The envelope shall be addressed to the officer and address as mentioned in the tender document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Clause regarding GST - (a) Tenderer should furnished their GSTIN numbers representing the States in which they are registered for GST, along with address of Registered Office, place of business in State etc. (b) The contract is under GST act & rules as applicable time to time. (c) All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Repairs to station buildings including white washing/painting, painting of FOBs, platform fencing, boundary walls, repairs to platform surface, station approach road, station circulating area, water supply and other related works under the jurisdiction of ADEN/JID
01-LMG-ENGG-64-2026~NFR
01-LMG-ENGG-64-2026
Open
Works - General
4 Months
Hojai, Assam
₹0
₹5.9 L
7 Nov 2026
7 Nov 2026
17 Nov 2026
122 items across 3 schedules · ₹2,49,27,004.74 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 500 | 260.3 | 1,30,150 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 200 | 196 | 39,200 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 100 | 2,123.75 | 2,12,375 |
| 4 | 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 40 | 8,340.85 | 3,33,634 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 30 | 7,878.5 | 2,36,355 |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 15 | 7,178.75 | 1,07,681.25 |
| 7 | 1:1 1/2:3 (1 cement : 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 20 | 10,357.55 | 2,07,151 |
| 8 | Concrete of M20 grade with minimum cement content of 270 kg /cum | cum | 20 | 9,212.6 | 1,84,252 |
| 9 | Concrete of M20 grade with minimum cement content of 270 kg /cum | cum | 20 | 9,568.25 | 1,91,365 |
| 10 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 50 | 9,045.75 | 4,52,287.5 |
| 11 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 20 | 10,852.95 | 2,17,059 |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 200 | 392.15 | 78,430 |
| 13 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 500 | 842.5 | 4,21,250 |
| 14 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 100 | 736.4 | 73,640 |
| 15 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 100 | 961.3 | 96,130 |
| 16 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 5 | 10,585.9 | 52,929.5 |
| 17 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 50 | 7,132.25 | 3,56,612.5 |
| 18 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 800 | 1,123.8 | 8,99,040 |
| 19 | Above plinth level upto floor V level | cum | 20 | 8,971.1 | 1,79,422 |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 300 | 1,267.95 | 3,80,385 |
| 21 | Second class teak wood | cum | 4 | 1,42,949.7 | 5,71,798.8 |
| 22 | Kiln seasoned and chemically treated hollock wood | cum | 5 | 71,337.85 | 3,56,689.25 |
| 23 | 30 mm thick shutters | Sqm | 50 | 3,338.65 | 1,66,932.5 |
| 24 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 50 | 3,167.95 | 1,58,397.5 |
| 25 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 100 | 238.35 | 23,835 |
| 26 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 50 | 228.85 | 11,442.5 |
| 27 | 125x65x2.12 mm | Each | 100 | 55.75 | 5,575 |
| 28 | 200x10 mm | Each | 100 | 69.4 | 6,940 |
| 29 | 125 mm | Each | 100 | 39.95 | 3,995 |
| 30 | 150x10 mm | Each | 20 | 82.55 | 1,651 |
| 31 | 100 mm | Each | 20 | 59.55 | 1,191 |
| 32 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm ( +/- 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. | Metre | 30 | 573.45 | 17,203.5 |
| 33 | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm ( +/- 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( +/- 0.2 mm). Lock rail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snap fit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge. | Sqm | 16 | 4,076.05 | 65,216.8 |
| 34 | Providing and fixing bolts including nuts and washers complete. | Kg | 100 | 159.35 | 15,935 |
| 35 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 500 | 172.6 | 86,300 |
| 36 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 100 | 772.4 | 77,240 |
| 37 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. | Sqm | 300 | 792.05 | 2,37,615 |
| 38 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 200 | 614.2 | 1,22,840 |
| 39 | 18 mm thick | Sqm | 300 | 662.05 | 1,98,615 |
| 40 | Light shade pigment using white cement | Sqm | 200 | 1,402 | 2,80,400 |
| 41 | 25 mm thick | Sqm | 800 | 1,948.25 | 15,58,600 |
| 42 | Size of Tile 600 x 600 mm | Sqm | 60 | 1,464.85 | 87,891 |
| 43 | 110 mm diameter | Metre | 100 | 377.4 | 37,740 |
| 44 | 110 mm | Each | 30 | 136.15 | 4,084.5 |
| 45 | 110 mm bend | Each | 30 | 150.35 | 4,510.5 |
| 46 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 300 | 738.65 | 2,21,595 |
| 47 | Ridges plain (500 - 600mm) | Metre | 50 | 532.35 | 26,617.5 |
| 48 | Gutter (600 mm over all girth) | Metre | 30 | 1,313.7 | 39,411 |
| 49 | 1:6 (1 cement: 6 fine sand) | Sqm | 1000 | 333.35 | 3,33,350 |
| 50 | 1:4 (1 cement: 4 fine sand) | Sqm | 200 | 399.45 | 79,890 |
| 51 | 1:6 (1 cement: 6 coarse sand) | Sqm | 1000 | 343.65 | 3,43,650 |
| 52 | 1:3 (1 cement : 3 fine sand) | Sqm | 200 | 300.45 | 60,090 |
| 53 | Neat cement punning. | Sqm | 1000 | 79.95 | 79,950 |
| 54 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 1000 | 262.7 | 2,62,700 |
| 55 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 1000 | 185.65 | 1,85,650 |
| 56 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 2000 | 116.9 | 2,33,800 |
| 57 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 2000 | 160.6 | 3,21,200 |
| 58 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 1000 | 193.7 | 1,93,700 |
| 59 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 2000 | 176.25 | 3,52,500 |
| 60 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 2500 | 170.7 | 4,26,750 |
| 61 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Sqm | 500 | 67.4 | 33,700 |
| 62 | On steel work | Sqm | 400 | 241.75 | 96,700 |
| 63 | On concrete work | Sqm | 400 | 235.15 | 94,060 |
| 64 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 1000 | 156.05 | 1,56,050 |
| 65 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 3000 | 25.15 | 75,450 |
| 66 | Old work (one or more coats) | Sqm | 3000 | 93.3 | 2,79,900 |
| 67 | One or more coats on old work | Sqm | 4000 | 102.8 | 4,11,200 |
| 68 | One or more coats on old work | Sqm | 3000 | 96 | 2,88,000 |
| 69 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | Sqm | 9000 | 112.9 | 10,16,100 |
| 70 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. | Sqm | 3000 | 75.8 | 2,27,400 |
| 71 | Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface | Sqm | 4000 | 131.3 | 5,25,200 |
| 72 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | Sqm | 50 | 1,090.65 | 54,532.5 |
| 73 | Dismantling W.C . Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. | Each | 20 | 134.1 | 2,682 |
| 74 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 15 | 2,434.25 | 36,513.75 |
| 75 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 5 | 3,551.25 | 17,756.25 |
| 76 | In cement mortar | cum | 10 | 2,060.2 | 20,602 |
| 77 | Of area 3 sq. metres and below | Each | 20 | 367.2 | 7,344 |
| 78 | Of sectional area 40 square centimetres and above | cum | 15 | 4,459.1 | 66,886.5 |
| 79 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 500 | 54.65 | 27,325 |
| 80 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 50 | 263.95 | 13,197.5 |
| 81 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re- rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | Sqm | 3000 | 218.9 | 6,56,700 |
| 82 | 63 mm to 45 mm size stone aggregate | cum | 200 | 1,636.05 | 3,27,210 |
| 83 | 53 mm to 22.4 mm size stone aggregate | cum | 200 | 1,842.3 | 3,68,460 |
| 84 | Stone screening 11.2 mm nominal size (Type B) | cum | 200 | 2,247.75 | 4,49,550 |
| 85 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . | cum | 600 | 1,046.95 | 6,28,170 |
| 86 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Sqm | 3000 | 644.05 | 19,32,150 |
| 87 | Using bitumen emulsion (minimum 50% bitumen content- RS grade conforming to IS : 8887) | Sqm | 3000 | 198.45 | 5,95,350 |
| 88 | On W.B.M / W.M.M. @ 0.4kg/sqm | Sqm | 2999.93 | 21.2 | 63,598.52 |
| 89 | With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt | Sqm | 3000 | 281 | 8,43,000 |
| 90 | Made of G.I. wire of dia 4 mm | Sqm | 200 | 1,017.8 | 2,03,560 |
| 91 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. | Sqm | 100 | 2,017.6 | 2,01,760 |
| 92 | 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. | Sqm | 1000 | 1,045.65 | 10,45,650 |
| 93 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. | Sqm | 200 | 1,091.5 | 2,18,300 |
| 94 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 20 | 6,767.4 | 1,35,348 |
| 95 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 20 | 8,006.6 | 1,60,132 |
| 96 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 20 | 6,258.75 | 1,25,175 |
| 97 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 20 | 1,879.2 | 37,584 |
| 98 | PN - 16 Pipe, 20mm OD (SDR-7.4) | Metre | 200 | 272 | 54,400 |
| 99 | PN - 16 Pipe, 40 mm OD (SDR-7.4) | Metre | 100 | 415.1 | 41,510 |
| 100 | PN - 10 Pipe, 50 mm OD (SDR-11) | Metre | 50 | 450.95 | 22,547.5 |
| 101 | 15 mm dia nominal bore | Metre | 100 | 322.15 | 32,215 |
| 102 | 25 mm dia nominal bore | Metre | 150 | 467.75 | 70,162.5 |
| 103 | 40 mm dia nominal bore | Metre | 100 | 617.05 | 61,705 |
| 104 | 50 mm dia nominal bore | Metre | 60 | 762.15 | 45,729 |
| 105 | 15 mm nominal bore | Each | 20 | 506.8 | 10,136 |
| 106 | 15 mm nominal bore | Each | 10 | 798.95 | 7,989.5 |
| 107 | Frame size 45 x 70 mm | Metre | 200 | 705.85 | 1,41,170 |
| 108 | 25 mm thick | Sqm | 20 | 3,889.15 | 77,783 |
| Schedule total | ₹2,41,20,485.62 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TD64OF202601.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .