Supply, installation testing and commissioning of fumehoods, laboratory furniture and servicing on turnkey basis of NPC Lab

ROOM NO.-228

BENCH TOP- AUTOSASH FUME HOOD (5’)

Overall Dimensions: 1500 mm W X 900 mm D X 2300 mm H (approx.)

Inside Fume Hood Working Volume: 1220 mm W X 660 mm D X 1180 mm H (approx.)

Bed size: 1220 mm W X 660 mm D (approx.)

Worktop height from the ground level: 795 -800mm (approx.)

FUME HOOD SERVICES

FH Front Control Valve For Comp. Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vaccum

FH Front Control Valve for Chilled water In

FH Front Control Valve for Raw water

FH Front Control Valve for Chilled water Out

FUMEHOOD INTERNAL PIPING

Fume hood internal piping for 6 Nos. services upto 6" above false ceiling.

GRANITE HOOD WORK SURFACE

Granite hood work surface of L=124MM, D=787MM, THICKNESS=25MM.

CUP SINK

Poly over "PP" Cup sink black

ACCESSORIES

Apparatus Storage Base Cabinet (castors)

Solvent / Acid Storage Base Cabinet (castors)

Lattice Assembly(Apparatus Holding Grid)

Airflow monitor AFA 1000/1 (Digital) TEL UK

Complete as per T.S

BLOWER MOTOR & ACCESSORIES

3HP/4P Motor with Centrifugal Blower -Medium Pressure Direct Driven PP moulded Centrifugal Blowers including suitable clamp adapter, Electro galvanized stand and 3.0 HP Motors, 1500 CFM, 1400 RPM with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

PP/FRP DUCTING & ACCESSORIES

Supply and installation of PP/FRP ducting using 3mm thick PPGL sheets with 2mm thick FRP lining using isothelic resin including necessary bends, reducers, T-connections, upports, flanges, gaskets, nutbolts flanges & bends and inside and outside lab duct supports and enamel duct painting for exposed ducts.

EXHAUST BLOWER PANEL

1nos 63A TP MCCB 25kA with adjustable thermomagnetic release, with door interlocked with release for O/L, S/C ,S/T and ON /TRIP/ OFF (latest ). Meters for measurement of current voltage, 1 nos of ELE(0-8a) with CBCT, Bushbar equally sized three phase and netural aluminium conductors bars, suitable sized to carry 63A current and suitable insulated with color coded heat shirinnk.

ARMOURED COPPER CABLE:

Supply and drawing following sizes of FR PVC insulated copper conductor, single core cable in FUME HOOD lighting & switches, sockets

Insulated sheathed steel tape armoured Copper cable with pvc outer sheathing 1.1 KV class, (All cables shall be AS PER IS 7098)

From panel to EXHAUST BLOWERS (1 nos.) of 1.1 KW (3 PHASE) 4 Core, 6 Sqm. cable.

SPOT EXTRACTOR

Alsident System 75 Exhaust Arm (75-6555-3-7-4) Ceiling Mounted 3 red joints, Reach: 1230 mm, including Ceiling Column to hold spot extractor Arm and other assocessories as complete.

GRANITE WORKTOP & SKIRTING

SUPPLY & FIXING JET BLACK GRANITE TOP 20 (±2) MM THICK SUPERIOR QUALITY. THE OVERALL HANGING OF GRANITE IS 25 MM AT FRONT SIDE OF UNDER STRUCTURE. DRIP LINING BELOW THE TOPS AT 15MM FROM THE EDGE

GRANITE SKIRTING; 100 MM HEIGHT'; 20 (±2) MM THICK

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 900 mm

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

Modules on C-frame (570 mm D x 635mm H) approx. (castors type)

One Drawer & Two Shutters- 600mm W

One Drawer & Two Shutters- 750mm W

One Shutter Corner Unit- 900mm L x 900mm W

Filler panel /Closing Panles

900 H Table (side/back panel)

Reagent Rack

Reagent Rack island Table :- 2 Tier Structure with provision for Switch and socket cutout provision. Both shelves will have 3mm friction glass fixing on top. Two shelves of 380 mm depth are adjustable and part will have storage cabinet aggange.

Size:- 2850Lmm x 400/380 + 300mmW x 1200 H

Reagent Rack wall table:- 2 Tier Structure with provision for Switch and socket . Both shelves will have 3mm friction glass fixing on top

Size:- 2850mmL x 190mmW x 750mmH

Sink / Peg Board/Taps / Utility

Big PP sink Outer size: 22" L X 18" W X 12" D & Inner size: 19" L X 15"W X 11" D approx.

Peg Board Big size: 750mm L X 750mm H ( 30 Pegs.) with SS Collection Tray to be fixed MS stand

Worktop mounted handed Eye wash

Two way utility Tap (Far-Italy)

One Way Mixer water Tap- (Far-Italy) (Hot & Cold)

PVC Waste Pipe

Electrical Trunking (Box structure)

Electrical Trunking:- Box structure single side with provision for Switch and socket fittings. (Wall Table)

Size:-1370 Lmm x 120 mm W x 120 mmH

Size:-750 Lmm x 120 mm W x 120 mmH

Switch & Sockets

Electrical 6 Pin shutter socket with switch including module plate 5/15A /6/16A, without Wiring

Data Point without Wiring

Chemical storage Cabinets (CSC)

Floor mounted Full Height Chemical storage Cabinets (Two numbers Toughened Glass door and phenolic resin aminated liner with four adjustable shelves & one fix shelf, with locking system, Size:- 1000Lmm x 450mm W x 1800 mmH

Centrifugal Blower with motor including assocessories complete. (1.5 HP)with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

ROOM NO.-229

BENCH TOP- AUTOSASH FUME HOOD (5’)

Overall Dimensions: 1500 mm W X 900 mm D X 2300 mm H (approx.)

Inside Fume Hood Working Volume: 1220 mm W X 660 mm D X 1180 mm H (approx.)

Bed size: 1220 mm W X 660 mm D (approx.)

Worktop height from the ground level: 795 -800mm (approx.)

FUME HOOD SERVICES

FH Front Control Valve For Comp. Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vaccum

FH Front Control Valve for Chilled water In

FH Front Control Valve for Raw water

FH Front Control Valve for Chilled water Out

FUMEHOOD INTERNAL PIPING

Fume hood internal piping for 6 Nos. services upto 6" above false ceiling.

GRANITE HOOD WORK SURFACE

Granite hood work surface of L=124MM, D=787MM, THICKNESS=25MM.

CUP SINK

Poly over "PP" Cup sink black

ACCESSORIES

Apparatus Storage Base Cabinet (castors)

Solvent / Acid Storage Base Cabinet (castors)

Lattice Assembly(Apparatus Holding Grid)

Airflow monitor AFA 1000/1 (Digital) TEL UK

Complete as per T.S

BLOWER MOTOR & ACCESSORIES

3HP/4P Motor with Centrifugal Blower -Medium Pressure Direct Driven PP moulded Centrifugal Blowers including suitable clamp adapter, Electro galvanized stand and 32.0 HP Motors, 1500 CFM, 1400 RPM with DOL Starter for Centrifugal Blowers, base frame, vibration isolators, weather cowl, Stack support, wire mesh for bypass, blower inlet PP flange, inlet & outlet flexible connection for Blowers.

PP/FRP DUCTING & ACCESSORIES

Supply and installation of PP/FRP ducting using 3mm thick PPGL sheets with 2mm thick FRP lining using isothelic resin including necessary bends, reducers, T-connections, upports, flanges, gaskets, nutbolts flanges & bends and inside and outside lab duct supports and enamel duct painting for exposed ducts.

EXHAUST BLOWER PANEL

1nos 63A TP MCCB 25kA with adjustable thermomagnetic release, with door interlocked with release for O/L, S/C ,S/T and ON /TRIP/ OFF (latest ). Meters for measurement of current voltage, 1 nos of ELE(0-8a) with CBCT, Bushbar equally sized three phase and netural aluminium conductors bars, suitable sized to carry 63A current and suitable insulated with color coded heat shirinnk.

ARMOURED COPPER CABLE:

Supply and drawing following sizes of FR PVC insulated copper conductor, single core cable in FUME HOOD lighting & switches, sockets

Insulated sheathed steel tape armoured Copper cable with pvc outer sheathing 1.1 KV class, (All cables shall be AS PER IS 7098)

From panel to EXHAUST BLOWERS (1 nos.) of 1.1 KW (3 PHASE) 4 Core, 6 Sqm. cable.

SPOT EXTRACTOR

Alsident System 75 Exhaust Arm (75-6555-3-7-4) Ceiling Mounted 3 red joints, Reach: 1230 mm, including Ceiling Column to hold spot extractor Arm and other assocessories as complete.

GRANITE WORKTOP & SKIRTING

SUPPLY & FIXING JET BLACK GRANITE TOP 20 (±2) MM THICK SUPERIOR QUALITY. THE OVERALL HANGING OF GRANITE IS 25 MM AT FRONT SIDE OF UNDER STRUCTURE. DRIP LINING BELOW THE TOPS AT 15MM FROM THE EDGE

GRANITE SKIRTING; 100 MM HEIGHT'; 20 (±2) MM THICK

C- Frame & Modules Details table wise, size depth 770 (±20) mm, Ht. 900 mm

C-Frame for Island table- Depth-1500mm x 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Wall Table - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C-frame for Corner unit - Depth 750 mm X 900 mm (H)

C- Frame & Modules Details table wise, size depth 670 (±10) mm, Ht. 750 mm

C-frame for Wall Table - Depth 650 mm X 750 mm (H)

Modules on C-frame (570 mm D x 635mm H) approx. (castors type)

One Drawer & One Shutter- 450mm W(535 mm D x 535mm H)

One Drawer & Two Shutters- 600mm W

One Drawer & Two Shutters- 750mm W

One Shutter Corner Unit- 900mm L x 900mm W

Filler panel /Closing Panles

900 H Table (side/back panel)

750 H Table (side/ back panel)

Reagent Rack

Reagent Rack island Table :- 2 Tier Structure with provision for Switch and socket cutout provision. Both shelves will have 3mm friction glass fixing on top. Two shelves of 380 mm depth are adjustable and part will have storage cabinet aggange.

Size:- 2400Lmm x 400/380 + 300mmW x 1200 H

Safety Shower

Safety Shower cum Eye Wash with dual action(TOF-Italy Make)

Sink / Peg Board/Taps / Utility

Big PP sink Outer size: 22" L X 18" W X 12" D & Inner size: 19" L X 15"W X 11" D approx.

Peg Board Big size: 750mm L X 750mm H ( 30 Pegs.) with SS Collection Tray to be fixed MS stand

Worktop mounted handed Eye wash

Two way utility Tap (Far-Italy)

One Way Mixer Tap- (Far-Italy) (Hot & Cold)

PVC Waste Pipe

Electrical Trunking (Box structure)

Electrical Trunking:- Box structure single side with provision for Switch and socket fittings. (Wall Table)

Size:-3600 Lmm x 120 mm W x 120 mmH

Size:-1800 Lmm x 120 mm W x 120 mmH

Size:-750 Lmm x 120 mm W x 120 mmH

Switch/Sockets

Electrical 6 Pin shutter socket with Piano switch including module plate 5/15A , (Northwest/ Norisys Make) With Wiring (2.5 Sq.mm FRLS)

Data Point without Wiring

Voice Point without Wiring

Overhead storage Cabinets

Wall Mounted Overhead File Cabinets (Float Glass Door) in CRCA MS/ GI Structure epoxy powder coated construction, Two Shutter with one adjustable shelf Size:- 750Lmm x 370mm W x 750 mmH (approx.)

ELECTRICAL WORK

ARMOURED COPPER CABLE:

Supply and drawing following sizes of FR LS PVC insulated copper conductor, single core cable in Lab Furniture & lighting, switches, sockets etc.

1.5 Sq. mm for switch & socket 5/15 amp

2.5 Sq. mm for switch & socket 5/15 amp

CAT-6 wire for Data Point

0.5 Sq. mm FR for Voice Point

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm (2mm thick)

25 mm (2mm thick)

Fixing/ re-laying of existing (20mm to 40 mm) PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Laying of existing / old cable for light point/ ceiling or wall mountain fan or exhaust fan etc. including point wiring of all Modular type switch/ socket on the existing Switch box/ cover including connections etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing of 2'x2' recess mounted LED fixture with 25-30 watts lamp (Make - Phillips/ Bajaj/ Crompton Greaves/Havells/Wipro)

Supply and fixing of wall mountain fan 16" . (Make- Bajaj/ Crompton Greaves/ Havells)

Supplying and fixing of ceiling mounted exhaust fan Exhaust Fans 12/18 inches with connecting flexable pipe /Louvers (Make- Bajaj/ Crompton Greaves/ Havells)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)

Supply & installation of ceiling prefabricated 14SWG perforted cable trays as per IS 2629. The entire fabrication and complecte with all bends, joint and accessories as per approval of site Engineer.

Size 150mm(W) x 50mm(D) cable tray

Size 75mm(W) x 50mm(D) cable tray

GAS DISTRIBUTION SYSTEM (For Fume Hood )

Semi-Auto-change over regulator for nitrogen, Brass Chrome Plate, Inlet 230 Bar, Outlet Avg. 14 bar, Inlet Connection NPTF 1/4'',Internal gas purging module, with Safety relief Valve, One cylinder connection in each side including SS bull nose, flexible hose (4 n0.) & cylinder bracket. (BRASS)

Cylinder Manifold, 4 Cylinder inlet along with manifold Block, shut off valve on each side with wall mount & clamp.

Cylinder Bracket with Chain and MS supporing fram

Connector for Change Over Panel outlet (1/4" MaleX1/4" OD). (SS304)

Source Connector for VP/AC/PC/RA

Ball Valve - 2" Flanged End. (SS304)

Ball Valve - 1" Flanged End. (SS304)

Flanges - 1" (SS304)

Ball Valve - 1/2" OD (SS304)

Ball Valve - 1" OD (SS304)

Tube - 2" OD (SS304)

Tube - 1" OD (SS304)

Tube 1/2" OD (SS304)

Tube 3/8" OD (SS304)

Liquid Pressure Gauge with necessary connectors & conmplete fitting

Vacuum Pressure Gauge with necessary connectors & conmplete fitting

Line Pressure Gauge with necessary connectors & conmplete fitting

13 mm Insulation for Chilled Water In & Out (1"OD) (Nitrile)

13 mm Insulation for Chilled Water In & Out (1/2"OD) (Nitrile)

13 mm Insulation for Chilled Water In & Out (3/8"OD) (Nitrile)

Tee 2"X2"X 2" OD (SS304)

Reducing Tee 2"X1/2"X 2" OD (SS304)

Elbow - 2" (SS304)

Tee 1"X1"X 1" OD (SS304)

Reducing Tee 1"X1"X 1/2" OD (SS304)

Tee 1/2"X1/2"X 1/2" OD (SS304)

Reducing Tee 1/2"X1/2"X 3/8" OD (SS304)

Elbow - 1" (SS304)

Reducer 1" X 1/2" OD (SS304)

Reducer 1/2" X 3/8" OD (SS304)

Connector 1/2" BSPF x 3/8" OD For Bench (SS304)

Connector 3/8 NPTM x 3/8" OD For FH (SS304)

Connector 1/2" BSPF x 1/2" OD For Sink/Bench (SS304)

Reducing Union 3/8" OD x 1/2" OD For Sink (Mixture Valve) (SS304)

Connector 3/8 NPTM x 1/2" OD For FH (SS304)

Profile (Aluminium)

Clamp set 2" (PP)

Clamp set 1" (PP)

Clamp set 1/2" (PP)

Clamp set 3/8" (PP)

Tagging (Acrylic)

Tube supporta wall & ceiling including Hardware (Tee nut, anchoring bolt, screws, nuts, washers, etc.)

Orbital welding charges

Electric Geyser (Instant type), 3 LPM, 3 KW, 6 lts. Tank capacity, fibre/metalic body of 69.5 Deg C temperature output and Source Connector including electrical fitting and fixtures.

Two Stage, Air Cooled Screw type Air Compressor with receiver, motor, drier, filters (pre & After) - 14 CFM capacity with necessary Lubricant oil of 05 lts.

Vacuum Pump with Motor, vacuum gauge, Switch, Silencer, 500 Lts. Receiver etc. - 34 CFM capacity with 29" of Hg maximum vacuum, with necessary Lubricant oil of 05 lts.

Air Cooled, Screw type, Industrial Process Chiller, 4 TR capacity of outlet temperature from Chiller 6° C. with inbuilt re-circulation Pump of discharge 50 LPM.

DRAINAGE & WATER SUPPLY LINE

Water supply line

Supply and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe, Unions,Reducer,Coupling,Tee, Reducer tee, Elbow, Male adapater, Female adapter,End cap, Brass couplings, Flange, Gaskets, with clamps at 1.00 m spacing metal supports etc.

PPRC pipe - 25 mm OD, 3.4 mm (SDR-7.4)

PPRC pipe - 20 mm OD, 3.4 mm (SDR-7.4)

PPRC Ball Valve - 25 mm OD, (SDR-7.4)

PPRC Ball Valve - 20 mm OD, (SDR-7.4)

Drainage line

Supply, laying, joining,testing and commissioning of 80 mm dia HDPE pipeline with necessary slope. The rate quoted shall include for necessary fitting with Coupling, Tee, Elbow, Flange, Gaskets, clamps,Adhesives solution, Metal supports etc.

FIRE ALARM SYSTEM

Supply Installation, Testing & commissioning of Smoke Detector , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of AUDIBLE VISUAL DEVICES SOUNDER , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of Heat Sensor , Make:- Honeywell/Sensor/Appolo

Supply Installation, Testing & commissioning of Unique ‘Plug & Play’ installation concept, Re-settable operating element option, Analogue addressable communications, Fully compliant with EN54, Part 11, Backward compatibility, Enhanced aesthetics, Integral LED, Integral Semi-Flush or surface mounting, loop isolation option Manual Call Points, Make:- Honeywell

Supply Installation, Testing & commissioning of 12V 7 AH Battery

Supply Laying Installation, Testing & commissioning of FRLS Cable (Normal Cable)

Supplying , Laying and fixing in position of the following sizes of exposed/concealed ISI Mark PVC conduit including all accessories complete as required and as per specifications.

25 mm dia 2mm thick conduit

OFFICE FURNITURE

Table with Top (1500 X 750 mm) shall be 25mm thick plain particle board clad with 0.6mm thick post formed laminate and 1mm thick backing laminate and flat edge duly sealed with 2mm thick PVC beading,

Medium Back Chair on castors, 4 bend PU Arms, Chrome Plated Pipe Frame & Base, Synchro Mechanism & Gas Lift, Seat and Back Letherite Tapestry.

Visitor Chair, PU Arms, Pipe Frame , Seat and Back Letherite Tapestry.

High Rise Revolving stool (Black seat cover) with cushion in seat & lumber support at back, SS metal stand with ring type foot rest & castors & Gas Lift

Sliding Door Unit (1200mm (W) x450mm (D) x1200mm (H))

ALUMINIUM WORK

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Fixing aluminium work for doors, windows, ventilators, partitions and shutter with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.

Supplying and fixing 12 mm thick Pre-laminated particle board with decorative lamination on both sides in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete.

Supplying and fixing glazing with float glass panes of 5 mm thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete

Hardware

Supply and fixing aluminium tower bolts, size- 200x10 mm

Supply and fixing aluminium handles, size- 150 mm

Supply and fixing aluminium Hyderolic door clouser size- 150 mm

MISCELLANEOUS

Removal /shifting of old furniture, fume hood and accessories and others unserviceable by mechanical transport including loading, unloading and proper stacking within 300 mtr. lead as per direction of Engineer in-charge. (The contractor shall visit of site and study the scope in detail work before submitting tender)

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mmGypsum Tile of size 595x595 mm, and 12.5 mm thick tapered edge gypsum moisture resistant board to be side border 600 mm wide if required(ration 20:80) as per specification/direction of Engineer in-charge.

Repairing of wall/ plaster as per requirement and distempering with oil bound washable distemper ( minimum two coat) of approved brand and manufacture to give an even shade in working site after completion of Installation of furniture and other allied wrorks.

Construction of RCC foundation/ cement concrete work etc. for Air Compressor, chiller unit vacuum pump & blower as per approved drawing and design.

Supply and fixing steel structural steel shed ub built up tabular (4"/3"/2"/round, square ir rectagular hollow tubes etc) including cutting hoisitn, fixing in position and applying a priming coar of pproved steel primer, including welding and bolted with special shaped washers etc and painting complete. Fixing in precoared galvanised iron profile sheets (Size, shape and pitch of corrugation as apprced by Engineer- in -charge) 0.50 mm (+ .05%) and related other allied work desired by Engineer-in charge.

Citizen Industries