Road Furniture Work at Various Places in Area Jurisdiction of Div-IV. (ARC). 2902

Item Code [2022 12.46.2]:Item Type [building] :: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on old work.

Item Code [2022/10.12]:Item Type [RUIDP] :: Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings

Item Code [2022/10.13]:Item Type [RUIDP] :: Sub Item Code [2022/10.13 + 2022/10.13.1]: Providing and erecting overhead signs with retro reflective Type IV sign plate fixed on angle iron frame with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans. Truss and Vertical Support

Item Code [2022/10.24]:Item Type [RUIDP] :: Supplying and fixing glow studs of size 100 X 20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylortrite) of ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer- in-charge. The glow stud shall support a load of 13635 kg. tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35+/ -5 degree to base. The panels on both sides with at least 12 cm of reflective areas up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM 1: 809 as recommended in BS : 873 part 4 : 1973 as per approved sample & manufactures by the Engineer-in-charge.

Item Code [2025 10.2 A]:Item Type [road] :: Sub Item Code [2025 10.2 A + (i)]: Providing and fixing of retro-reflectorised cautionary , mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mmx 450 mmx 600mm, 600mm below ground level as per drawings and MoRTH Specification Clause 801 900 mm equilateral triangle

Item Code [2025 10.3 (A) (ii)]:Item Type [road] :: Direction and Place Identification signs upto 0.9 sqm size board :: A. Retro-reflectorised Traffic Signs (ii) Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on 2 inch dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600, 600 mm below ground level as per approved drawing and and MoRTH Specification Clause 801,upto 0.9 sqm size board.

Item Code [2025 10.3 A (i) Retro-reflectorised Traffic Signs]:Item Type [road] :: Direction and Place Identification signs upto 0.9 sqm size board A. Retro-reflectorised Traffic Signs (i) providing and erecting direction and place identification retro reflector is edsign as per IRC:67 madeof encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9 sqm supported on amild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801. Direction and Place Identification signs upto 0.9 sqm size board

Item Code [2025 10.6]:Item Type [road] :: Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and MoRTH Specification Clause 801

Item Code [2025 Rd 10.10]:Item Type [road] ::Kilometre Stone :: Reinforced cement concrete M 15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 801 Sub Item Code [2025 Rd 10.10 + 2]: Kilometre Stone :: Reinforced cement concrete M 15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 801 Ordinary Kilometre Stone (precast)

Item Code [2025 Rd 10.10]:Item Type [road] ::Kilometre Stone :: Reinforced cement concrete M 15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 801 Sub Item Code [2025 Rd 10.10 + 3]: Kilometre Stone :: Reinforced cement concrete M 15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 801 200 m stone (precast)