Miscellaneous Development at Various Location Deoli

Amount

P&F Gun metal statue/ sculpture of any type & size as per approved drawing and placement of statue/ sculpture as per direction of engineer-in-charge (composition of Gun Metal, Copper 85%, Tin 5% Lead 5% Zinc 5%.) 1: 1 Scale Model 1:1 Scale Model Shall be prepared in EPS with a final finish of POP to finalizestance and basics of required sculpture and to examine final features and shape of statue Sillicon Rubber Mold for Waxoming Mouds shall be prepared in Sillicon Rubber for further working in WAX Metal Casting Lost Wax casting process shall be applied and panel of the statue will be casting in minimum 1 to 2 pieces at ourin house fo undry. Average thickness of skin shall be 6 to 7mm with composition of bronze will be Copper 75%, Tin-10%, Lead-10%, Zinc -5% (Including 12% GST and Transportation and installation cost)

High Mast Flag Supply, Installation, Commissioning & Testing of 30.5 Mtr Flag Mast suitable for 180 KM/HR wind speed complete for 30 ft x 20 ft size Tri color National Flag (Quantity - 1 Nos) Construction of shallow foundation with M20 grade concrete for the Flag mast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour and soil investigation. (Quantity - 1 Nos) Supply, Installation, Testing & Commissioning of 30.5 Mtr. Flag mast. Mast shaft shall be in three sections, hot dip galvanised and suitable for wind velocity as per IS 875. It includes a special type of Dome and including.PU Painting of Flag Mast shaft with a coating of etch primer, primer and PU paint. (Quantity - 1 Nos) Supply, Installation, Testing & Commissioning of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. (Quantity - 1 Nos) Supply, Installation, Testing & Commissioning of System for Raising Lowering of Flag. It shall have double drum winch, 6 mm dia galvanised wire rope and integral power tool for the raising and lowering of Flag. Suitable control panel shall be provided for reversing operation of Power tool motor. (Quantity - 1 Nos) Supply, Installation, Testing & Commissioning of LED single dome System and Aviation Obstruction light with 3C x 2.5 Sqmm Cu armoured cable. (Quantity - 1 Nos) Supply, Installation, Testing & Commissioning of LED 300 to 350 watt Flood Light IP 65 or suitable for Ilumination of Flag mast. (Quantity - 2 Nos) Supply, Installation, Testing & Commissioning of 5M high hot dip galvanised octagonal pole suitable to mount 1no. non-integral flood light fittings at top & control gear box mounting arrangement at bottom. (Quantity - 2 Nos) Supply, Installation, Testing & Commissioning of foundation bolts manufactured from special steel along with nuts, washers etc. (For 5M Pole) (Quantity - 2 Nos) Supply, Installation, Testing & Commissioning of National Flag size 20X30Ft, made with shiny kintted polyester, 160 GSM ( C ) (Quantity - 2 Nos) Supply, Installation, Testing & Commissioning of GI pipe earthing for Flag mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour. (2nos per mast required) (Quantity - 2 Nos)

5MP IR Bullet HD Camera: 1/2.6" Progressive Scan or better CMOS, H.265 or better compression, Color: 0.01 lux@(F1.2, AGC ON), 0 lux with IR, slow shutter 1/3s to 1/100,000s or better, 20fps (2560×1920), 25fps/30fps (2560 × 1440), fixed 6mm / 12mm lens; array type IR range minimum 70m, 120dB true WDR, VCA functions, triple streams, 3D DNR, BLC, ICR, Built-in micro SD/SDHC/SDXC slot upto128 GB, alarm trigger on (Motion Detection, Tampering Alarm, Network Disconnected, IP Address Conflict, Illegal Login, HDD full, HDD error), open protocol ONVIF (PROFILE S & PROFILE G), 10M/100M self-adaptive Ethernet port, behavior analysis (Line crossing detection, intrusion detection, unattended baggage detection, object removal detection, Face Detection), All-metal housing, IP67, DC 12V & PoE. UL, CE & FCC Certified. Approved Make: - LG / SAMSUNG / HIKVISION / SONY / BOSCH.

Supply Iinstallation Testing & Commissioning of 32ch Network Video Recorder. Support upto 32 IP Cameras, 320 mbps incoming bandwidth, 8 SATA Type Hard Disk slots to support upto 6TB Hard Disk in each slot. RAID 0,1,510, Dual Gigabit Network Interface, Serial Interface, E-Sata Interface, USB Interface. UL, CE and FCC Cetification Approved Makes: LG / SAMSUNG / HIKVISION / SONY / BOSCH

Supply and Fixing of 4TB 3.5" SATA type Surveillance Hard Disk Approved Makes: SAMSUNG / SEAGATE / WD

Supply and Fixing of 40" Full HD LED TV / Monitor with HDMI Cable and mounting accessories Approved Makes: LG / SAMSUNG / SONY / PHILIPS

Supply Iinstallation Testing & Commissioning of point to point Wireless Radios, 5.8Ghz frequency, 100+ mbps throughput, 10/100/1000 Ethernet Port, dual linear, 180 km/h or better wind survivability, able to work under -30 to 60° C temp Approved Makes: MOTOROLA / UBIQUITI / RAD/comgard

Supply Iinstallation Testing & Commissioning of 4Port switch with 4 port PoE Switch, unmannaged type, 10/100Mbps RJ45 ports, Supported network protocols IEEE802.3,802.3u,802.3x, 802.3af, 802.3at, 1GB or better switching capacity, PoE Power Capacity 55W or better, Surge Protection Approved Makes: CISCO / D-LINK / HP / HIKVISION

Supply and Fixingof 1 KVA online UPS with internal batteries for minimum 30 min power backup complete with required accessories Approved Makes: APC / EMERSON / LUMINOUS / MICROTEK

Supply and fixing of 10 Meter GI / MS Pole with red oxide paint and cement & concreate foundation Approved Make: Febricated

Supply and fixing of 5 Meter GI / MS Pole with red oxide paint and cement & concreate foundation Approved Make: Febricated

Supply and fixing of Junction box for Switch, power supply and other accessories Approved Make: Febricated

Supply and fixing of 16 port Gigabit easy desktop switch

Supply and fixing of 22U wall mounting rack with fan, tray, PDU and other required accessories to mount it on wall Approved Make: COMMRACK / PRESIDENT / NETRACK

Supply and Fixing of three legs basis self support tower of 30 meter height at roof of Control Room complete with red oxide paint and cement & concreate foundation Approved Make: Febricated

Supply , Drawing and Testing of 4 pair, CAT 6A FTP - Foiled Twisted Cable as per latest ammendments of TIA /EIA 568 C.2 Specifications Approved Makes: MOLEX / AMP / TYCO / SYSTIMAX/D-link

Supplying and drawing of ISI maeked 2 core 1.5sqmm power cable Approved Makes: POLYCAB / HAVELLS / RR KABEL / KEI

Supplying and drawing of 25 mm HDPE conduit pipe for drawing of power and CAT6 cable Approved Make: Reputed

Sea-Saw - Two seats on each side, seats to be made of glass fiber, height from surface 2 feet, end to end length 8 feet made of MS pipe painted with DOCO paint.

Merry Go Round (Manual) - Made of high quality glass fiber and round MS pipe (grips covered with high quality rubber); MS pipe painted with DOCO paint; diameter 5 feet; height from surface 1 feet; meant for 10 children;

Slides - Slipper and body made of high quality glass fiber; frame made of MS pipe painted with DOCO paint; height 4-5 feet; slipper length 8 feet

Sunset Scrambler - Made of round MS pipe and furnished with DOCO paints; meant for children of 4-12 years age group, diameter 5 feet; height from surface around 6 ft; safe play area 11.8 × 11.8 feet.

Swing - Meant for children (02 seats); seats made of glass fiber with metal chain; frame made of round MS pipe painted with DOCO paint; height 5-6 feet.

BIS Marked Submersible Pumpsets to IS:8034 latest suitable for bore size 100 mm, for use in borewells for handling clear cold water having motor ISI Marked to IS:9283 latest of wet type for continuous rating synchronous motor

Decorative Stones/ Port

Supply , installation testing and commissioning of 9M height four arm Pole Made in combination of continous Conical tapper section (6000 mm length minimum) which is fabricated using High tensile MS Sheet (3mm thick) with top dia. 80-90mm minimum & bottom 140-155 dia. Minimum 1.7M height four arm ornamental designed bracket made in combination of mild steel pipe sections 60mm dia. x 2.6mm thick & 38mm dia x 2mm thick. Decorative part made in combination of gravity cast aluminium to get horizonal arm length as shown in drawing with pleasing aesthetics. The brackets shall be a single piece assembly and should be capable of orientation in any direction and secured with stainless steel 304 grade allen grub screws. Decorative ring between base pole and bracket is made of cast iron. Decorative finial top is made of cast iron in single piece of min. height 250mm. The decorative base is made of Gravity cast aluminium with the company / brand logo embossed on it. With minimum dia of the base is 500 mm & height is 1250mm. All dimension are within +/- 5% tolerance. Cast aluminium material is LM6 grade. Cast iron-Material-Grey Iron & Grade-FG 200. The pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. The pole is to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum). Final design in concurance with the Architect In-charge. Make : K-Lite / Ligman / Neri or equivalent make

P&I of IP65 protected LED Decorative Light system Fixture made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy >90 Lumen/W. SMD LEDs , System CRI>70, CCT: 3000/4000/6500 K. The integral SMPS based electronic driver must be constant current and surge protection of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<20% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 burning hours with 70% of Initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. External Surge Protection Device(SPD) to be connected saparately 110W LED Decorative Fixture. Note :- Design to be approved as engineers incharge. 110W Decorative LED Light Fixture

Supply, Installation testing and Commmisioning of A modern heritage pathway luminaire, integral model, totally weather proof aesthetically contoured. Improved long lasting protection against ingress of dust / moisture / insects inside optical compartment with top opening facility for maintenance. Streamlined aerodynamic profile for lesser resistance. Luminaire comprises of specially contoured spun aluminium body. Non yellowing, UV stabilised, convex type acrylic diffuser. Luminaire Ø600 and height 600mm. Suitable for mounting to internally threaded pipe of designation M30. Supplied with wattage of 100W. System efficacy 100 lm/W minimum, The value shall not exceed junction temperature Tj 85°C, Luminaire body temperature should not exceed 30°C, CRI >70, different CCTs, life span of L70 / B10 @ 50000 Hrs, SDCM = 3, Type III light distribution, Operating Temperature 0°C~45°C, Input Voltage 230-240V ac, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, frequency 50-60Hz, Power factor >0.9, 6KV surge protection, THD <10%, IP65 protection, CE /BIS Conformity. Make : K-Lite / Ligman / Neri or equivalent make