PROVISION OF PARKING SHED FOR TYPE IV QUARTERS AT OADG (N) OJHAR NASHIK

Amount

Excavation in post holes (or similar hole) each not exc 0.5 Cum and getting out in any type of soil, and removing excavated soil to a distance not exceeding 50 m distance and making good surface complete all as specified and as directed.

Material and labour for PCC type B2 (1:2:4) by using 40 mm graded stone aggregate as in fixing of fencing post / strut etc complete all as specified & directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick (TCT) of any colour as approved by GE having tensile strength of 550 Mpa as in roof covering / cladding to wall geometrical shape of any radius of any profile, fixed with self tapping screws complete all as specified and directed.

Material and labour for pre-painted galvalume sheeting of 0.5 mm thick (TCT) as specified in item no. 03 here-in-before with crimping ridges matching with colour & profile of roof sheeting fixed with self tapping screws complete all as specified and as directed

Supply and for Steel work in tubular trusses purlin, rafter, posts, gusset plates, cleat angels, wind ties, of any geometric shape of any radius or ornamental shape etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 complete all as specified and as directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick (TCT) of any colour as approved by GE having tensile strength of 550 Mpa as in roof covering/ cladding to wall geometrical shape of any radius of any profile, fixed with self tapping screws complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but not exc 10 cm long, dia of shank 5 to 10 mm complet all as specified and as directed.

Material and labour for preparation of new steel surface of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out any type of soil all as specified and directed.

Returning, filling in and ramming with approved excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layers in soft/loose/disintegrated soil all as specified.

Removing excavated material to a distance exceeding 250 mtr but not exceeding 500 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Material & labour for moorum as in filling in floors laid in layers n exc 15 cm thick, spread, leveled and well ramming including watering as required and as directed and specified.

Material & labour for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded broken stone aggregate as in sub base of flooring for footpath complete all as specified and directed.

Material and labour for 75 mm thick PCC type B1 (1:2:4) by using 20 mm graded stone aggregate finished even and smooth without using extra cement as in floor with spike rolling to surface or marking impression of expanded metal, whilst the concrete is green complete all as specified & directed.

Material and labour for hard core (broken stone or boulders) of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

Material & labour for plain cement concrete type C-1, 1:3:6 ( using 20 mm graded stone aggregate) as in apex stones, path kerbs and the like including weathering, slightly rounded for chamfered angles and throating, including formwork complete all as specified and as directed.

Material & labour for forming contraction (Dummy) joints 65mm deep x 10mm wide sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth, ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth in soft /loose soil etc and getting out complete all as specified.

Material and labour for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in filling and mass concrete under floors all as specified and directed.

Material & labour for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Material & labour for rendering 15 mm thick in cement mortar 1:4 on fair surfaces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing new plastered surfaces of walls and applying two coats of cement based paint over a coat of white cement coat all as specified and directed.

sunway associates

M/S PRAMOD SURESHCHANDRA AHER

Santhi Enterprises

BUNTY DHARASINGH RATHOD

SHREE SAMARTH SERVICES