ADDITION ALTERATION TO ROOF OF SHED BESIDE SNCO MESS AT GV CAMP UNDER GE AF MARATHAHALLI

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified andas directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified andas directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface as in hard/dense soil complete all as specified andas directed.

M&L for PCC 1:3:6 , Type C2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified andas directed.

M&L for framed work as in doors or gates of angle or other ection with gusset plates,rails,braces, etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive or steel sheeting or other covering running rails and girders) and hanging also fastening and fixing complete of Fe 410-W (Gde-E-250 quality A). (Note: The work will be executed approximately upto 8.25 Metre height from Ground Level)

S&F Steel work in tubular trusses, purlins, rails and fastening and heavy bracket framing including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified andas directed.

S&F Pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof coveringin any curvature, fixed with self tapping screws complete all as specified andas directed.

S&F Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugation side lap fixe with coach screw and washer in roof, wall etc. fixed with self tapping screws complete all as specified andas directed.

M&L for steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly providing suitable size mild steel terminal boxes concealed in wall with 3 mm thick hylum sheet top cover to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for One light point controlled by one switch complete all as specified andas directed.

Supply and fix Switch piano flush type single pole one way 5 Amps, 230 V complete all as specified andas directed.

Supply and fix ceiling rose surface PVC / polycarbonate isolated body with three terminals complete all as specified andas directed.

Supply & fix LED flood /focus light indoor type 120 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP 66 protection system efficiency LFLN_120-CDL/60-M High bay / focus light indoor type, 110 W complete all as specified andas directed.

Material and Labour for Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including PVC rigid conuit of 20 mm dia alongwith accessories on surface of wall , roofs etc., complete all as specified andas directed. Note : 2 runs of PVC FRLS cable, one run of earth continuity conductor cable and one run of PVC conduit shall be measured as one length/running metre.

Supply and Fixing in repairs MCB DB SPN 4 way,Double door, 240 V, AC, 50 Hz, with 200 Amp rated bus bar complete all as specified andas directed.

Supply and Fixing in repairs MCB SPN 32 Amps rating, 10 KA 'C 'curve, 240V, 50 Hz AC complete all as specified and as directed.

Supply and Fixing in repairs MCB SP 5 to 32 Amps rating, 10 KA Ç 'curve 240V, 50 Hz AC complete all as specified and as directed.

Supply and fixing LTUG cable of size 16 Sqmm , 4 core XLPE insulated screened PVC bedded, galvanised steel strip wounded ,electric power cable 1100 volts ,with stranded aluminium conductor and making connection with suitable lugs complete all as specified and directed.Note: (i) Earth work excavation , sand cushioning, bricks for protection, GI pipe etc shall be measured and paid for separately under relevant items of this schedule complete all as specified andas directed.

Supply and fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) complete all as specified and as directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal anagement in multiple optics complete with IP 65/66 protection complete all as specified andas directed.

Material and labour for pole wiring drawn through 20 mm pvc conduit regid pipe including copper wiring multistrand two runs of 1.5 sqmm and one run of 1.5 sqmm earth wire as earth dolly.wiring sintex box to light fitting and internal connections for light fittings complete all as specified and as directed.

Supply and fixing moulded PVC / SMC Junction boxes out door type, weather proof, of size 240 x 130 x 95 mm to be fixed at the bottom of street light pole 3ph RYB busbar 200 amps capacity complete with suitable clamp , nut, bolt, washers and suitable glands ,to accommodate 01 No MCB SP 6 Amps 10 KA, with suitable connectors for incoming and outgoing connections , complete all as specified and directed.

Supply and laying 10 sqmm, 4 core LT UG cable XLPE insulated screened PVC bedded, galvanised steel strip wounded ,electric power cable 1100volts with stranded aluminium conductor and making connection with suitable lugs complete all as specified and directed.

Supply and laying 95 sqmm,3.5 core LT UG cable XLPE insulated screened PVC bedded, galvanised steel strip wounded ,electric power cable 1100volts with stranded aluminium conductor and making connection with suitable lugs complete all as specified and directed.

Excavation in trenches in soft /loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient complete all as specified and directed.

Returning filling including spreading levelling watering and well ramming to excavated soil in layers not exc 25 cm thick complete all as specified and as directed

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

Material and labour for Sand cushioning to cables with a layer of sand before and after laying the cable complete all as specified and as directed. Note :- Sand shall be measured after punned down.

Material and labour for Brick protection cover on cable with sub class 'B' bricks, across in trenches laid dry and flat adjacent to each other complete all as specified and as directed

Material and labour for G.I. tubing light grade of size 50mm bore for protection of cables to be laid under roads, crossings/culverts including taking down/up old unserviceable GI tubing complete all as specified and as directed.

Supply, install, testing & commissioning LT panel board, factory made cubicle totally enclosed Out door type, CPRI approved, IP-42, fabricated out of 3 mm thick CRCA sheet with angle iron base frame made of 50x50x6 mm thick angle iron 1 mtr long with PCC 1:4:8 type D2 at legs operated front side and rear side cover incl provision of cable glands of suitable sizes for incoming/outgoing cables, two coats of synthetic enamell paint over a coat of red oxide, inside and outside, Aluminium bus bar of rating 400 Amps for phase and half for neutral, mounted on epoxy insulator in parallel, covered with super quality PVC insulator tube of red, yellow, blue and black, pre-wired with suitable size of PVC insulated 1100 volts FR HR grade copper conductor, single core, multi stranded , comprising of the following (a) MCCB 400 amps Adjustable type 3 pole,36 KA,415 V - 01 No (incomming ) (b) MCCB 200 amps Adjustable type 3 pole,36 KA,415 V - 02 No (out going) (c) MCCB 100 amps ,Adjustable type 3 pole,36 KA,415 V - 02 No (Out going) (d) MCCB 63 amps ,Adjustable type 3 pole,36 KA,415 V - 02No (Out going) (e) Digital Panel meter , VAF+PF meter 3ph class 1-5A (f) Neutral link (g) RYB indicators - 01 set (h) Copper Bus Bar 600 Amps 4 Way. Assembly -01 nos (i) Rotary switch for 3 phase RYB -01 No (j) CT coil 600/5 amps for suitable - 03 Nos

M & L for taking of LT UG cable from the loop trench after isolation of power supply including cutting/dressing of cable ends alongwith unsv cable lugs and provisioiin of new cable lugs Make : Dowells and connecting with LT panels terminals with new GI bolt / nuts and double washer including earth work, restoration of power supply complete for the following sizes of cables.Note:-( One cable end 3.5 or 4 Core dressing, crimping and fixing measured as one job) complete all as specified andas directed. (a) 10 / 16 Sqmm 4 Core

All as per item no 32 above, but, (b) 70/95 Sqmm 3.5 Core

Material and Labour for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregates as in massconcrete /foundation / for supporting LT panels (encasing) in any position including plastering of surfaces complete all as specified and directed

Material and Labour for cement rendering for valve chamber inside and out side of cement marter 1:6 and 10 mm thick complete all as specified andas directed.

M&L for Earthing complete with galvanisedsteel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below groundlevel) with top edge of the plate notless'than 1.5 metres below normalground level, connected togalvanised earth lead 4 mm GI Wire by means of bolts, nuts, checknuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing testpoint all as specified or indicated including testing complete all as specified andas directed.

Siddivinayaka Constructions