Repair to Joinery, rolling shutter, Aluminium door window, ceiling, plastering, wall tiles and flooring in certain units at Zone-I at Mil Stn Jaisalmer at Mil Stn GE (Army) Jaisalmer

Amount

Resecuring without taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

Resecuring or easing & adjusting without taking down shutters of any description n exc 1 sqm each complete all as specified by Engr-in-charge

Resecuring or easing & adjusting without taking down shutters of any description exc 1 and n exc 2 sqm each

Resecuring or easing & adjusting without taking down shutters of any description exc 2 sqm each

S&F in repair fancy type drapery rod including brackets

S&F in repair mild steel, chromium plated curtain rod cut to size 20mm dia with holder/bracket, stops, rollers etc, all as specified and directed by Engr-in- Charge.

Repair of steel window shutter n exc 1.5 Sqm each by replacing projected type unserviceable hinges with welding new hinges or welding of existing broken hinges and handles to window frames and easing of shutters to proper closing with oiling to hinges and painting at welded portion to match the existing surfaces each

All as item above but ventilator shutter n. exc 1 Sqm each

M&L for second class hard wood Plain fillets sectional area Exc 3 & n. exc6 sq. cm, square, rectangular or triangular in section, clean sawn, secured with mills or brads, in repairs or if refixed in old position

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified .

S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

S&F aluminum handles cast type, anodised, 150mm size complete all as specified .

S&F aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified .

S&F in repair extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed butt hinges type B-21, 100 mm long, complete all as specified.

S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel door frame if required complete all as specified.

S&F in repair extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed butt hinges type C-21, 75 mm long, complete all as specified.

S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding or fixing in wooden chowkats if required

S&F in repair 100 mm long aluminium anodised hasp and staple complete all as specified

S&F in repair 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt all as specified.

S&Fin repair mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&F in repair 300mmAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&Fin repair 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified.

S&F in repair for 125mmExtruded aluminium ally handles, fabricated type., anodised

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 40mm width of flaps (when open )

S&F in repairs 100mm Rim latch with two levers, of aluminium alloy body, stove enamelled finish; with brass knob or lever handle and fixed

S&F in repair 75mm Mortice latch with two levers (vertical type), aluminium, anodised body and fixed

S&F in repair 75mm Aluminium Mortice lock, 4 lever, vertical type,

S&F in repair brass Drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long

S&F in repair magic eye for doors

S&F in repairs 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F door seal for aluminium & wooden door shutters for sealing the gap between floor and shutter all as specified and directed

M&L for hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

S&Fof 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&Fof 5.5 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&Fof 3mm thick sheet glass is ground or obscured or frosted, on one side ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

M&L for applying oil putty including taking down old oil putty from old and any size of glazing.

Taking down shutters of any description not exceeding 1 square metre each complete all as specified.

Taking down shutters of any description exceeding 1 square metre each and n. exc 2 Sqm complete all as specified.

Taking down shutters of any description exceeding 2 square metre each complete all as specified.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified.

Taking down shutter of any description exc 1 sqm but not exc 2 sqm each.

Refixing shutter of any description exc 1sqm and n exc 2 sqm each in same opening

S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc all as specified.

S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc all as specified.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II and complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rails. M.S. frame shall be covered with heat mouleded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No.8B.1 to 8B.10 and drawing on page No. 146 of MES SSR-2004 Part-II complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc all as specified

S&F in repair 18/19 mm thick block boards, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board exposed face fixed with 20x6mm thick teak wood beading complete all as specified.

Repair of aluminium shutter of any description and size including taking out the shutters and refixing in the same opening and easing of shutter to proper closing with oiling to hinges, floor spring etc all as specified and directed by Engr in charge.

Welding in repairs n exc 5 cm in length and thickness of plate n exc 8mm complete all as specified and directed

M&L for Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M&L for New framed work as in doors or gates of angle(45x45x5) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Taking down the cover hood of existing rolling shutters of gear/manual operated type (area of shutter exceeding n exceeding 11 Sqm carefully and complete overhauling the shutters by applying grease, oil etc in bearings springs guide channels, operating rod etc for smooth and free operation and refixing the cover back in position, complete all as directed by Engineer-in-Charge.

Replacement of tension spring in the shaft of rolling shutters suitable to the rolling shutter and making good the disturbed surfaces to match to the existing for gear operated type rolling shutter complete all as directed by Engineer-in-Charge.

Replacement of ball bearing in the shaft of rolling shutter complete all as directed by Engineer-in-Charge.

S&F in repairs Safty lever lock mild steel with four lever for rolling shutter complete all as specified and directed.

S&F 50mm dia MS pipe heavy grade as in shaft in rolling shutters including taking out old unserviceable pipe complete all as directed by Engineer-in-Charge.

S&F in repairs Steel rolling shutter, 1.25mm thick with bal bearing as specified including top cover, anchorging rod hasp and staple and one shop coat of primer errected in position as indicated complete push pull or mannual type incl taking down complete all as directed by Engr-in-charge.

M&L in repair framed work as in roller of rolling shutter with flat iron through out the length of roller complete all as directed by Engr-in-charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer alll as directed by Engr-in-charge. Make : Asian (Apcolite).

M&L for preparation of old painted steel surfaces and applying one coats of synthetic enamel paint over a coat of red oxide zinc chrome primer alll as directed by Engr-in-charge. Make : Asian (Apcolite).

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement.

M&L for ceramic tiles exterior grade 300 x 300 x 10mm (Endura from Johnson or equivalent) including screed bed in CM 1:6, 15 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and roughening of exc concrete surfaces all as directed

M&L for coloured glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 as backing coat including demolion existing tiles complete all as directed by Engineer –in-Charge.

M&L non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc in patches not exceedind 5 sqm jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles complete all as directed by Engr-in-charge.

M&L non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including demolion of existing tiles complete all as directed by Engr-in-charge.

Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately)

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 all as directed.

M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone ,copings,bed plates ,water through and the like including wethering ,slightly rounded or chamfered angles and throating including use of form work (straight or curved ) set in CM 1:4 complete all as specified and as directed by Enginneer in charge

Dismantling (AC corrugated , semi corrugated etc ) AC sheets in roof coverings complete all as specified & directed by Engineer in charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not othervise provided for work

S & F Joist, channel, angel or tee sections, fixed independently , without connecting plates etc

M & L preparation of new steel surfaces exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer primer

S K TRADER

Vinay Traders

BHAGWATI CONSTRUCTION

M/S RAM NIWAS BISHNOI