CERTAIN B/R REPAIRS TO BUILDINGS INCLUDING DAILY COMPREHENSIVE MAINTENANCE SERVICES IN ZONE B AT DAMANA UNDER GE JAMMU

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters and refixing in same opening after resecuring or easying and adjusting, also refixing builder's hardware as required including renewal of unserviceable screws etc of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Material and labour for factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10 cm on either side including one shop coat of red oxide chrome primer and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Material and labour for factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10 cm on either side including one shop coat of red oxide chrome primer and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with mild steel square tube supplying and fixing in opening as per specification complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Supply and fixing mild steel butt hinges medium weight 75 mm long complete all as specified and as directed.

Supply and fixing 30mm thick flush shutters, soild core construction, with particle board core and plywood face panels, both faces are covered with decorative face veener with lipping / frame to match complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35mm thick factory made second class hard wood, glazed and skelton shutter open, rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2020 Part-I Section 8.24(b) supplied and fitted to chowkhats complete all as specified and as directed.

Supply and fixing mild steel butt hinges medium weight 100 mm long complete all as specified and as directed.

Supply and fixing box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 all as directed. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs

Supply and fixing in repairs 18 / 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws / nails to timber / steel frame work as in shelves, cupboard shutters, book case, writing table stand, shelves etc including fixing of plain fillets square or rectangular of second class hard wood not exceeding 3 Sq.cm in leaping to shutters / shelves compete fixed complete all as specified and as directed.

Supply and fixing continuous piano hanges, mild steel, bright finish or electrogalvanised, width of flap 30mm (when open) fixed with welding complete all as specified and as directed.

Supply and fixing Hasp and staple size 100 mm, aluminium anodised, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing Aluminium handle cast type, anodised size 150mm long, 'D' type complete all as specified and as directed.

Supply and fixing Aluminium anodised barrel tower bolts, with bright bolt and fixed 200mm complete all as specified and as directed.

Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fixing in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fixing in repairs Helical door spring 150mm including roller and roller plate complete fixed with welding to existing steel chowkhats complete all as specified and directed.

Hacking out old broken glass of any thickness, size, quality or description from the wooden / steel frames glazing with putty or fixed with wooden beads complete all as specified and as directed.

Supply and fixing 3mm thick ordinary glass sheet quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 storey building complete all as specified and as directed.

Description all as per Ser item No 24.00 here-in-before but frosted glass complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of 15mm bore complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of 20mm bore complete all as specified and as directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and as directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm, complete all as specified and as directed.

Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

Refixing only 20mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

Complete removal of vegetations, roots and shurbs from wall and making good the wall with cement, brick work and plastering including all scaffolding up to 4 storey building complete all as specified and as directed.

Material and labour for disconnecting existing tanks of capacity exceeding 250 litres but not exceeding 500 litres, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for disconnecting existing tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC low level flushing cistern valveless, syphonic action type of 10 litres capacity white with inlet, ball valve, float and handle including cast iron brackets, PVC flush pipe 32mm dia, PVC connection (15 x 450 mm) long complete all as specified and as directed.

Supply and fixing in repair Vitreous china squatting pan 'Orissa pattern' size 580 x 440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe, etc. complete making good to floor as existing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs stainless steel sink with drainage board, made of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets, connecting union to pipe, overall size 915mm x 460mm, bowl size (410 x 330 x 160mm).

Supply and fixing in repairs kitchen plate rack of stainless steel of size 900 x 800 x 230mm made out of 1mm thick stainless steel sheet all as specified and directed.

Supply and fixing in repairs Vitreous china wash hand basin white, flat back of size 550 x 400mm including waste pipe and coupling, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs pillar tap fancy type chromium plated with capstan head, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes 15 mm bore dia complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated wall mixer of bore dia of pipe 15mm for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated mixer for sink / wash hand basin of bore dia of pipe 15mm for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated wall mixer with 'L' bend suitable for shower provision of bore dia of pipe 15mm for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repairs PVC connection 15mm, 450mm long with nuts and washers complete all as specified and directed.

Supply and fixing in repairs chromium plated bib tap 15mm size with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing angle / stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and as directed.

Supply and fixing swivel shower rose PTMT any colour with arm 15mm size 195mm long complete all as specified and as directed.

Supply and fixing in repairs waste coupling of PTMT (half or full threaded) of bore dia 32 mm discharge pipe complete all as specified and as directed.

Supply and fixing in repair grating doom 100mm dia without hole chromium plated complete all as specified and as directed.

Supply and fixing in repair grating doom 100mm dia with hole chromium plated complete all as specified and as directed.

Supply and fixing in repair 15mm bore long body bib tap cast copper alloy fancy type chromium plated with capstan handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fixing PVC waste pipe 32 mm dia and suitable length straight or flexible type for wash hand basin / sink complete all as specified and as directed.

Supply and fixing in repairs tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass chromium plated complete all as specified and as directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Dismantling PVC water tank of capacity upto 1000 litres and removing from site complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified in SSR Part I and as directed.

Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified in SSR Part I and as directed.

Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm-142 grams) of 15 mm bore complete all as specified and as directed.

Supply and fixing in repairs 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram), screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area all as specified and directed by Engineer-in-Charge. Note: - Plaster work may be in patches upto triple storey.

Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and as directed.

Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick surface finished even and smooth without using extra cement etc. complete all as specified and as directed. (including all necessary scaffolding, lifting arrangement for external surfaces).

Material and labour for applying two coats of oil bound distemper to newly plastered surfaces including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coats of cement based paint over a coat of primer including preparation of new plastered surface complete all as specified and as directed.

Material and labour for applying three coats of white wash on ceiling including preparation of newly plastered surface complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and directed.

Dismantling floors, hearth or wall tilling including cement mortar bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Description same all as per Ser item No 74.00 here-in-before but as in skirting including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for vitrified tiles dark shade 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour for vitrified tiles dark shade 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10 mm thick screed in cement mortar (1:4) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles 300 x 450 x 7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and 10 mm thick screed in cement mortar (1:4) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Material and labour for granite 20mm thick (Pure black) (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:4) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Dismantling asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and as directed.

Material and labour for pre-painted galvalume aluminum zinc coating galvanised iron based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for pre-painted galvalume aluminum zinc coating galvanised iron based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantling 40 Sq.cm and over in section framed work of any description complete all as specified and as directed.

Supply and fixing for structural steel works of Fe-410W (Grade 'E' 250) quality 'A', as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate / red oxide primer paint (including preparation of surface) before fabrication complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nail complete all as specified and as directed.

Supply and fixing for frame work for ceiling with specification as under mentioned: - (i) Galvanised iron section frame work (Powder coated) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mm X 19mm X 0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X 24mm flange 0.33mm thick. Wall angle shall be screwed / fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220 mm centre to centre to soffits. To from grid of 610 X 610mm cross Tee shall be provided @ 610mm centre to centre in both directions and all suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for 4mm thick of size 605 X 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 fixed / laid / inserted to galvanised iron frame work at ceiling with screws complete all as specified and directed.

Material and labour for double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs all as defined complete all as specified and as directed.

Repair to Aluminium door including adjusting, necessary bedding, clip, rubber beader, repair to floor door closer complete all as specified and as directed.

Supply and fixing Aluminium (extruded section) body door closer hydraulically regulated designation No 2, universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 and 60kg and fixed in repairs complete all as specified and as directed.

Supply and fixing in repair curtain rod choromium plated / PVC coated, mild steel, with fixing brackets, side ball stops, rollers, etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed.

Description all as per Ser item No 96.00 here-in-before but except bricks complete all as specified and as directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three parts of sand (all by weight) complete all as specified and as directed.

Material and labour for 25 mm thick plain cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in levelling course mixing liquid water proofing compound as per manufacturer's instructions complete as in roof / floor etc complete all as specified and as directed. Note: - Rates for necessary scaffolding / form work etc upto three storey roof top to be included.

Material and labour for 75 mm thick cement concrete (1:4:8) type D- 2 (using 40mm graded crushed stone aggregate) as in sub base etc complete all as specified and as directed.

Supply and fixing chequered coloured cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in cement slurry in floors with grey pigment cement and pigments including and over 15mm thick screed bed or bedding layer of cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finish complete all as specified and as directed.

Material and labour for 60 mm thick machine pressed precast conctete interlocking paver block in glossy finish with grey / coloured cement and pigment, any shape and size conforming to IS : 15658-2006 M-35 grade complete all as specified and as directed.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Supply and fixing in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints fixed to wall complete all as specified and as directed.

Supply and fixing in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints fixed to wall complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) bends of bore 110mm dia complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) bends of bore 75 mm dia complete all as specified and directed.

Material and labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greassy spots etc and applying one coat of oil bound distemper including wall putty on wall complete all as specified and as directed.

Material and labour for complete removal of existing treatment of external walls including cornices, pillasters by brooming down or steel wire smoke, root, mould, moss and efflorscent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc, applying two coats of weather proof paint exterior grade over one coat of primer on walls, making good the depression etc with wall putty surface even and smooth including all scaffolding arrangement upto four storeyed building complete all as specified and directed.

Material and labour for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old wooden surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of cement based paint on old prepared surfaces of walls all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engineer-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

KRISHNA BUILDERS

M/s Koul & Sons

M/S LANGER CONSTRUCTION CO

bushan kumar

M/S KARAN SINGH CONTRACTOR

M/S ELECTROMATICS