Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹58.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹64.0 L+₹5.1 L (8.56%)Rejected-Finance | L2 | Rejected-Finance HIGH BID VALUE | |
| 3 | L3₹65.4 L+₹6.4 L (10.9%)Rejected-Finance | L3 | Rejected-Finance HIGH BID VALUE |
Tender Value
₹52 L
EMD Value
₹1.0 L
Closing Date
24 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL GANESH ZAPE
HQ CWE Tenga, PIN- 900194 C/O 99 APO
SPECIAL REPAIR TO ROAD, ROAD SIDE FURNITURE AND PROVISION OF INTERNAL ROAD AT BAISAKHI UNDER AGE B/R -II OF GE 859 EWS
2022_MES_558837_3
8324/E8
Open Tender
Civil Works
Works
180 days
GE 859 EWS
C a(v)
8 documents required · 8 mandatory
₹1,000
GE 859 EWS
₹1.0 L
Yes
26 Apr 2023
24 Feb 2023
27 Mar 2023
24 Feb 2023
24 Mar 2023
10 Mar 2023
Amount
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n. exc 400 sqm exc 50 mm and not exc 100mm deep and removing the the same n exc 50 metres and stacking where directed,
Repairs to pot holes not exc 1 sqm each including sweeping free from dust and mud or water,scoring sunken sufaces in roads ,paths, etc, cutting around edges to at least 25 mm in depth,making good by applying tack coat at 5 kg per 10 sqm putting in premix as specified for thin bituminous carpet (2 cm thick with 0.27 cum of stone chippings mixed with 14.6 kg of paving bitumen) well rammed and sealed with liquid seal coat, applying evenly binder @ 9.8 Kg per 10 sqm blinding with 6.3 mm size stone chippings @ 0.09 cum per 10 sqm and rolled to a uniform smooth surface complete all as specified and directed.
M&L for 75mm thick (compacted thickness) WBM, with coarse aggregate of grading 2 (63 to 40mm size) spread rolled and consolidated to gradient materials and camber.
Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with bituminous primer of paving bitumen at 10 kg per 10 sqm all as specified and directed.
M & L for preparing existing black top surfaces as brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat with bituminous primer of paving bitumen at 5 kg per 10 sqm all as specified and directed.
M&L for Bituminous premixed carpet 30 mm consolidated thickness with 0.40 cum of stone chipings mixed with 21.90 kg of paving bitumen (binder) ,rolled and compacted to required gradient and camber etc,complete all as specified and directed.
M&L for premixed sand seal coat with 0.06 cu.m of sand mixed with 6.8 kg of paving bitumen, applied and rolled to a uniform smooth surface complete all as specified and directed.
M&L for applying thermoplastic reflective paint as in road marking of minimum 2.5mm thickness, single coat as in making of 100/150 mm width using Hot mark thermoplastic paint (Hot application) white /yellow by indigenous modern, propelled road marking machine as directed including all ingredients all ingredients such as binder glass,beads etc all as per specified and directed.
Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 mcd completed as per manufactures instructions etc. complete all as per specified and directed.
Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as per specified and directed.
Supply and fixing metal tubular delineator madeout of ABS round body fitted with 2 Nos 65 mm dia highly reflected made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green , red and yellow reflecter radius tape 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x150 x300 mm) type B1 complete all as specified and directed.
Supply and fix only Polycarbonate Convex Mirror (80cm dia) make 3M or equivalent in AUTOMAT/ACE/DARK EYE/ISI marked, polycarbonate body mounted on 16 gauge MS pipe of 75mm outer dia fixed 1.5mtr above ground surface and 60cm below ground incl PCC foundation of size 30x30x60cm with PCC 1:3:6 type C1 bottom part of MS pipe welded with 5mm thick 125mmx125mm MS plate for anchorage in PCC , MS pipe shall be painted stove enamelled paint over a coat of red oxide, incl necessary earthwork excavation in any soil,removed and disposal of spoil complete all as specified and directed by Engineer-in-charge. (Note:- Convex mirror shall be as per sample held in GE 859 EWS sample room shall be got approved by GE before fabrication of iems in bulk.)
Rough excavation not exceeding 1.5 m deep and getting out in hard / dense oil
Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil, complete all as specified and directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick as in hard/dense soil, complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.
M & L for 100mm thick (spread) Soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and considated to required gradient and camber with power roller of capacity 8 to 10 tonne complete all as specified and directed
M&L for 150 mm thick (compacted thickness) WBM, in two layers with coarse aggregate (Granite,trap or Basalt) of grading 2 (63 to 40mm size) spread rolled and consolidated to gradient materials and camber required with power roller of capacity 8 to 10 tonne complete all as specified and directed
M&L for Sand cushioning for laying interlocking pavers complete all as specified and directed.
S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement with no pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade.The interlocking joints shall be filled with fine sand complete all as specified.
M&L for Providing, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed
M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for cement concrete type C2,1:3:6 (using 40 mm graded stone aggregate) as in surface channel and drains complete all as specified and directed.
M&L for Rendering 15mm thick in cement mortar 1:4 on concrete surfaces, finished fair and even, complete all as specified and directed.
M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1:6, complete all as specified and directed.
M&L for Extra over stone walling lime or stone for hammer dressing with maximum depression from straight edge held against the dressed surface to face beds and joints as specified of random rubble walling uncoursed or brought upto co \urses complete all as specified and directed.
M&L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level with broken stone or boulders, complete all as specified and directed.
M&L for cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in coping complete all as specified and directed
S&F 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.
M&L for Keyed pointing to random rubble masonry brought upto course in cement mortar 1:4, complete all as specified and directed.
M/S TSEWANG ENTERPRISES
M/S P K ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .