Certain repair/replacement of interlocking tiles, footpath, fencing etc and Repair/replacement of roof top, false ceiling, plumbing and sanitary fittings of bathroom /toilets and windows in residential building of PAO ORs at JAK LI RC under GE 970 EW

Amount

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough, complete all as specified and as directed.

Dismantling interlocking tiles including serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern (glossy finish) as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Description all as per item No 04 above but except interlocking tile (using old interlocking tiles retrieved from Item No- 3 above) complete all as specified and as directed

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded agregate as in copings incl necessary form work, complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone agg) as in foundation filling and mass concrete, complete all as specified and as directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and as directed.

M&L for two coat of synthetic enamel paint over a coat of priming paints incl preparation of new concrete surfaces plain or moulded, over 10 cm width or girth when unconnected with other painting or when painted in a different, complete all as specified and as directed.

M&L for one coat of synthetic enamel paint incl preparation of old concrete surfaces plain or moulded, over 10 cm width or girth when unconnected with other painting or when painted in a differen, complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry built in cement mortar, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and as directed.

Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Description all as per item No-12 above but except bricks, complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair(without using extra cement) in two layers with WPC complete all as specified and as directed.(WPC paid seperately)

M&L for preparation of newly plastered surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

Dismantling posts or struts (wood, Steel or RCC) any section including taking out embedded portion and maiking good disturbed ground , complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and directed

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, in ant type of soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified and as directed.

S & F Chain link fencing, 4mm dia MS galvanised fencing size 75 x 75mm mesh, made up into mattressess or cages, lapped, wired and laid in position incl fixing in angle iron post complete all as specified and as directed

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, fordoors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming toFe-290 Gde E-165, complete all as specified and as directed.

S&F 2mm thick Fibre glass reinforced translucent plain sheeting with fixed with coach screw and washer in roof, wall etc, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 Gde-E-165, complete all as specified and as directed.

M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface , complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 1:4, 15mm thick in cement mortar for laying for rough finish to receive in top layer, complete all as specified and directed.

M&L coloured Non - skid Ceramic tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry andpointed in white or coloured cement to match complete all as specified and directed.

M & L 10 mm rendering on fair faces of brick work or concrete surface in cement mortar 1:3 to receive tiles complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 350 x250x7 mm 450 x350 x7mm thick set and jointed in neat cement slurry and pointed in while or colour cement to match the tiles complete all as specified and directed.

Demolition Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.complete all as specified and directed .

M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms/WHB drain tub and like in cement mortar (1:4) over and incl 15mm thick screed bed or bedding layer of mortar 1:3, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A", complete all as specified and directed.

Demolition of cement concrete in reinforced( reinforced cut as required to faciliitate demolition) roofs, floors beams ,stair cases,landings,chajjaas and similar suspended work complete all as specified and directed .

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed .

S&F MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M&L For RCC Type A1, 1:1½:3 using (20 mm graded agg) Slabs supported on walls,beams and columns in floors,roofs,landings,alconies,canopies, deck slabs and in shelves and the like complete all as specified and directed .

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats, etc. FE 410-W (Gde- E-250) quality A, complete all as specified and as directed.

M&L For framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed .

Dismantling boarding, any description, fixed in any position with nails.

S&F for anodised aluminium snap grid frame work for false ceiling (Size of grid 605 x 605mm) complete all as specified and directed.

S&F 8mm thick Non asbestos fibre cement building boards fixed or laid /inserted to existing timber/GI /Aluminium frame/flat iron frame work with screws, complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed .

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed .

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 20 mm thick softwood eaves board with nails in any situation (except flooring and skirting) planed one side with butt joints complete all as specified and directed.

Taking down cement plaster any description on brick or stone masonry walls incl racking out joint , Hiking for key ,scrubbing down with water , complete all as specified and as directed.

M & L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement morar 1:6 finishing the surface even and smooth ( without using extra cement , complete all as specified and as directed.

Supply only integral water proofing compound , complete all as specified and as directed.

M&L for preparation of new plaster surface of wall and applying 3mm thick of wall putty, complete all as specified and directed.

M&L for preparation to new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed .

M&L Preparation of old plastered or painted surfaces of wall by complete removing of existing treatment (scrubbing, washing down etc) and applying one coat of wall putty of minimum 3 mm thick, complete all as specified and directed.

M&L for applying two coats of oil bound distemper incl preperation of surfaces, complete all as specified and directed.

M&L for applying two coat of exterior emulsion over a coat of chalk whitenin Finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) , complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame ) area n exc 1.5 Sqm each, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm and n. exc .4 .00 Sqm each, complete all as specified and as directed.

S&F Box type steel window (Factory made) outer frame made out ERW tube 'P' section 65mmX45mmX25mm and shutters of ERW tube 'P' section 50mmX35mmX20mm openable (double) shutter with glazed openable shutter on (External side) and wire gauzed openable shutters on (internal side) with steel pintal hinges, steel handle 100mm long, mild steel tower bolt 02 Nos on each shutter, stopper of 'Z' section and its locking arrangement at mild steel hook and eye including , complete all as specified and as directed. (Ref Drg No CESZ-1018/2011 SHEET 1/3 TO 3/3) Note: The quoted rate against the above item shall also include:- (i) For provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat tar on the ends of steel frame in contract with bricks/concrete surface. (ii) 04 Nos MS steel Lugs of 20mmX5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs (iv) 0.36 mm dia SS wire mesh width of aperture 1.4mm (v) 4 mm thick sheet glass- for window (vi) 4 mm thick figured glass- for ventilator (v) 10mm sq MS grill bars

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 No), hinges type B-21,100mm long (2 No.) suitable handle (1No.) (Thickness or powder coating not less than 50 micron) including 5 mm thick sheet glass, complete all as specified and as directed.

S& F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed.

M&L for Preparation of old steel painted surfaces and applying one coats of synthetic enamel paint over steel windows/roof surface complete all as specified and directed .

M&L for Preparing old wood and wood based materials of any description and girth, not otherwise described and treated with one coats of synthetic enamel etc, complete all as specified and directed .

Supply and fix in repair 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square but exc 0.5 sq.m in each pane, complete all as specified and directed .

Supply and fix in repair 0.36 mm dia nominal dia of stainless steel wire cloth avg width of aperature 1.40 mm and fixed with SS wire staple etc,complete all as specified and directed .

S&F in repair 25 mm dia Stainless Steel curtain rods including fixing arrangements bracket, cap, complete all as specified and directed .

Taking up or down 15 to 25 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 20 mm outer dia pipe of bore 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded (Polypropylene random copolymer) fittings fixed complete to walls, ceilings or infloors etc., complete all as specified and directed.

S&F 25 mm outer dia pipe of bore 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded (Polypropylene random copolymer) fittings fixed complete to walls, ceilings or infloors etc., complete all as specified and directed.

S&F in repair vitreous china water closet Pedestal pattern pan and trap, including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. including PVC valveless syphonic action type flushing cistern trap, incl 10 Ltr capacity PVC flushing cister & flush pipe and anti-syphonage pipe incl jet sprey with 15 mm dia, 1 mtr long flaxible tube fixed, complete all as specified and as directed.

S&F in repairs 15 mm dia CP sower rose, with or without swivel joints any size incl fixing to steel pipes or unions etc, complete all as specified and directed .

S&F in repair 15mm bore bib tap long nose/long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass, weight n ot less than 450 gms ferrule and fixed, complete all as specified and directed .

S&F in repair chromium plated fancy type WHB mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore stop/angle cock, cast copper alloy CP, fency type high presure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions complete all as specified and directed.

S&F in repairs 15mm bore stop/angle cock, cast copper alloy CP, fency type high presure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions , but fancy type, chromium plated with long shank and cup (concealed type) , complete all as specified and as directed.

S&F in repairs for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed .

S&F in repair Low density PVC connection commercial quality 450mm long including PTMT nuts at both sides of 15mm bore and fixed, complete all as specified and directed.

M/S MEGA BUILDERS (BID ID -3187303)

M/S A.R TANTRAY (BID ID -3193397)

M/S BASHIR AND SONS (BID ID -3185920)

G N Constructions (BID ID -3192649)