REPAIRS TO ROOF, JOINERY, TOILETS, FLOORING ETC INCLUDING INTERNAL WATER SUPPLY AND SANITARY FITTINGS FOR CERTAIN BUILDINGS IN VIMAN NAGAR AND CHANDAN NAGAR FOR SMQS AND OTMS UNDER AGE BR-II OF GE (AF) LOHEGAON AT AF STATION PUNE.

Amount

Taking down chowkats or frame n.exc 1.50 sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frame exc 1.50 sqm but n.exc 4 sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

Ditto all as per Ser Item No. 3.00 above but not exceeding 1 Sqm each complete all as specified and directed.

Hacking out old broken glass any thickness, size qulaity or description from metal frames exc 1.5 sqm including punching drilling gout old glazing pins/spring clips complete all as specified and directed.

Taking down plaster on brick or stone wall including racking out joints hatching for key scrubbing down with water etc complete all as specified and directed.

Dismantling of roof covering of any description complete all as specified and directed.

Dismantling of wall/ceiling board as in ceiling and lining of any gauge or any thickness including cover fillets complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 125 x 60 mm complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 105 x 60 mm complete all as specified and directed.

S & F steel windows with side hung shutters (single frame with double shutter)inside gauzed and outside glazed including projection type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F steel ventilator with top hung shutters including hinges steel peg stay, guard bars 10mm sqare, MS bars welded @ 175 C/C horizontally etc complete all as specified and directed.

S & F flush shutters water proof BWR grade solid core construction with block board core and ply wood face panel commercial type both sides 30mm thick complete all as specified and directed.

S/F for second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass gauge etc (withsash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 Clause 8.20 (b) and fitted to chowkats complete all as specified and directed.

M&L for 2nd class hard wood 30 mm thick glazed and skeleton shutter open rebated prepared to receive, glass guage etc, devided in to square with plain, chanferred or rounded mitered or rounded sush bar (any nos)as per SSR Pt-I Sec-8,Cl 8.20(b) complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of ms tubes for top &bottem rails, ms frame shall be covered with heat moulded plain colour PVC 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheetfor top rail ,lock rail, &bottem rail, on either side & as gap insert for top rail , panneling of plain colour pvc sheet to be fitted in the ms frame welded /sealed to the stiles & rails with suitable pvc sheet beading, &jointed together with solvent cement suppling & fixing in the frame at site as per spacification & drawing complete all as specified and directed.

S&F 100 mm long butt hinges, medium weight, and cold rolled mild steel extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 200 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 125 mm extruded aluminum alloy handles, cast type, anodized complete all as specified and directed.

S&F 125 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M & L for PCC 1:3:6 type C0 using 12.5 mm graded aggregate as in filling of pressed steel frame chowkats complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width or aperture 1.40mm and fixed with tinned tackles or galvanished wire complete all as specified and directed.

S&F in repairs for GI wire cloth of 0.56 mm nominal dia of wire & 1.18 mm avg width of aparaturre fixed with wooden beads complete all as specified and directed.

S & F sheet glass ordinary quality 3mm thick glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Ditto all as per Ser Item No 27.00 above but of frosted glass complete all as specified and directed.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates aluminium section weighing 0.55 kg/m including joining cleat glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site complete all as specified and directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M & L 450x300x7mm thick glazed ceramic concept tile coloured on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic tiles(400x400mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for Glazed ceramic tiles(300x300mm) x 7mm thick, in vertical surfaces daso skirting or risers etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10 mm thick screed bed in CM (1: 6) complete all specified and directed.

S & F Sheet Glass, Ordinary quality 5.5 mm Thick including necessary rubber beading complete all as specified and directed.

M & L Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work 19/18 mm complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on broken chajjas / facia / walls / ceilings etc, area n. exc 3 sqm each patch (in repairs) , includings finishing to match with existing surfaces complete all as specified and directed.

M & L for rendering 10mm thick in CM 1:6 finished even and smooth without using extra cement with sagol finished complete all as specified and directed.

Second class hard-wood Clean sawn battens at 30cm centres, sectional area exc 5 & nexc 15 Sqcm complete all as specified and directed.

M&L Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, 2nd class hard wood, N-exc 3 sqcm complete all as specified and directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creasote complete all as specified and directed.

M & L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls,Fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and directed.

M & L Asbestos cement Two-piece serrated ridge for corrugated or semi corrugated sheets 6mm thick,Fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and directed.

Supply and fix 0.80 mm thick plain galvanized mild steel sheeting in ridges hips, valley, gutters, drip and straight flashings (length or girth as fixed) with grade of zinc coating 275 gm/sqm complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for suspended false ceiling using anodized aluminium snap grid frame work for false ceiling, Size of grid 605 x 605 mm fixed to soffits with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia. 40mm long and Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frameworkorwith staples on snap grid complete all as specified and directed.

Material and labour for providing 75 mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as Path/Plinth protection finished the surface even & smooth with out using extra cement. complete all as specified and directed.

M/L for PCC (1:2:4) type B1 using 20 mm graded aggregate (40 mm thick) as in flooring, finished the surface even & smooth with using extra cement complete all as specified and directed.

S and F for glass dividing strip 3 mm thick & 38 mm wide fixed to floor complete all as specified and directed.

Material and Labour for sand cushioning under floors for laying paver block including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block 65 mm thick rubber molded any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

Material and labour for screed bed or bedding layers 20 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for Chequered cement concrete tiles 250x250x25 mm etc. set and jointed and pointed in neat cement slurry in floor with grey cement and pigment complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

S & F in repairs Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S & F in repairs Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs Bib taps, cast copper alloy 15 mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs PVC Connection 15mm size and 450mm long complete all as specified and directed.

S& F in repairs 32mm dia Waste coupling of PTMT (Half & full threaded) minimum weight 32mm-45gms/40mm-60gms) complete all as specified and directed.

S & F steel Tubes, 'medium grade' 15MM bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F steeL Tubes, 'medium grade' 20MM bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs Stop valves 15mm , cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for preparation of new plastered/unplastered surfaces and applying three coats of whte wash on walls complete all as specified and directed.

Material and labour for applying two coats of Cement Base Paint over a coat of Chalk whiting on walls including preparation of new or previously untreated surfaces complete all as specified and directed.

Material and labour for applying two coats of dry bound distemper over a coat of Chalk whiting on walls including preparation of new or previously untreated surfaces complete all as specified and directed.

M & L for two coats of synthetic enamel paint over one coat of pink primer on wood or wood based materials includings preparation of new surfaces complete all as specified and directed.

M & L for two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces including preparation of new surfaces complete all as specified and directed.

Smruti Construction

R K ENTERPRISES