Modernization and Renovation of TNSC Bank premises at Korattur Branch in Chennai city

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

13.1) Filling with Excavated Earth

30) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

39) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate

41) Painting the New iron work with two coats of Synthetic enamel paint

52) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable a) 32mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials

b) 25mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials

c) 20mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials

63) Supplying, laying, fixing and jointing the following PVC pipes waste water pipe of 32mm dia

72) Supply and fixing of Fan hook

Electrical arrangement 74) Charges for assembling and fixing of ceiling fan

86) Providing preconstructional antiterminate treatment

238) Applying one coat of Anticorrosive treatment for steel grills

ANNEXURE 2.15) Supply and filling in foundation and basement with Stonedust

3.1.3) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly) for foundation using 40 mm gauge broken stone jelly

3.2.3) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) using 20mm gauge hard broken stone jelly for Foundation & Basement and other similar works

6.2.2) Brick work in CM 1:5 (One of cement and five of crushed stone sand) using chamber burnt bricks of size 9”x 4½”x 3” (23x11.4x7.5cm) in foundation and basement

8.2.4.1) Standardised concrete Mix M25 Grade Concrete a. In Foundation and basement

c.In First floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") b. In Ground Floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm thick (B.P.) b. In Ground Floor

14.2.1) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in standized M25 grade cement concrete b.40mm thick In Foundation basement

18.1) Providing Form work using MS sheet a) For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b) Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c) Form work for Small quantity and column using M.S. sheet

21.5.2.2) Supply and fixing of UPVC door with frame

21.7.3) Supplying and fixing of Single leaf Solid core flush door shutters a.1000mm x 2100mm

22.5.1) Supplying and fixing of following furniture fittings (ISI) make including cost of material and labour charges for fixing etc., all complete a) Aluminium Door Stopper with Rubber Bush with required screws

b) Butt Hinges with Nylon Washers of various sizes of Length and Width (100mm x 30mm)

c) Aldrops of (250mm long 16mm dia rod) with required screws, bolts and nuts

d) Towerbolt (150mm long 12mm dia) (with required screws)

e) Handles "D" type of 150mm long (with required screws)

f) CI Gratings 100 mm dia

23.2.1) Supplying and fixing of 4mm thick pin headed Glass panels with Aluminium beadings

26.1) Flooring bed in CC 1:5:10 using 40mm HBS jelly for foundation & basement

29.8.1) Supplying and fixing of Colour Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm thick

29.9.1) Supplying and fixing of colour ceramic tiles (Anti-skid) using Grout (Tile Joint Filler) C.M 1:3, 20mm thick

32.1.1) Finishing top of roof with one course of Hydraulic Pressed Tiles of size 23cmx 23cm x 20mm thick laid over weathering course in CM 1:3, 12mm thick

32.1.5) Removing all loose and dry cement point from existing tile joints and pointing the existing Pressed Tile over the roof with cement mortar 1:3 (One of cement and three of crushed stone sand)

33.1.1) Plastering with CM 1:5, 20mm thick

33.2.1) Plastering with CM 1:5, 12mm thick

35.2.1) Special ceiling plastering with CM 1:3, 10mm thick

37.1.1) White washing three coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding and scrapping the old surface

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe with relevant specials

50.3.2) Labour charges for removing the tree/ green grasses in terrace floor/water tank slabs and side walls clearing the trees without affecting the adjacent structures

51.2) Supply and fixing of 1000 liters capacity HDPE water tank

53.5.1) Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

54.1.1) Supply and fixing of 15mm dia half turn CP long body tap

54.2.1) Supply and fixing of 15mm dia half turn CP short body tap

56.3.1) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade 'P' or 'S' trap In Ground floor

57.1.1) Supplying and fixing EWC superior variety (white) 500mm

58.3) Supplying, laying, fixing and jointing the following PVC SWR pipes a) 110mm dia SWR pipe

b) 75mm dia SWR pipe

59.2.1) Supplying & fixing and of gully trap of 150mm

60.1) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)

61.3) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

64.1.1) Wiring with 1.5 sq.mm copper PVC insulated unsheathed single 1.1 KV grade core / cable with continuous earth by means of 1.5 sq.mm copper PVC insulated wire. Open Wiring a.Light Point with ceiling rose

b.Light Point with out ceiling rose

65.1.1) Wiring with 1.5 sq.mm copper PVC insulated unsheathed single 1.1 KV grade core / cable with continuous earth by means of 1.5 sq.mm copper PVC insulated wire for Fan Point (Open wiring )

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark

75.2) Supply and delivery of following Electric Ceiling fan a) 48" Electric fan 1200mm sweep

77.3.1) Supply and fixing of 3mm thick PVC Hylem sheet

77.5.1) Run off mains with 2 wires of 1.5 Sqmm copper PVC insulated unsheathed single core 1.1KV cable (Open wiring)

77.7.1) Run off mains with 2 wires of 2.5 Sqmm copper PVC insulated unsheathed single core 1.1KV cable (Open wiring)

79.5) Supply and fixing of 3 Nos of 100Amps 500 volts grade porcelain fuse unit

80.2.1) Supply and fixing of TW plank 450 x 375 x 20 mm

82.3.1) Supply and fixing of 25W LED street light with fittings

96.6) Supplying and laying of Rubber moulded hydraulic Pressed Paver Blocks 63mm thick using Stone dust with required design & colour

105) Run off main with 4 wires of 4 sq.mm. PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990,1.1 KV grade cable (Open wiring)

105.3) Run off main with 4 wires of 6 sq.mm. PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990,1.1 KV grade cable (Open wiring)

112.1) Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI Quality

144.2.3) Supply and fixing of 100W LED flood light

171.2.1) Supply and fixing of 4way Three phase Horizantal Distribution Box with TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars

207.3.1) Painting the false ceiling / walls with two coats of 1st class ready mixed Plastic Emulsion Paint of best approved quality colour and shade including a primer coat

207.3.4) Painting the old walls with two coats of 1st class ready mixed exterior emulsion paint of best approved quality including thorough scrapping

207.3.5) Painting the old walls with two coats of 1st class ready mixed plastic emulsion paint of best approved quality including thorough scrapping

207.4) Painting the old wood work with two coats of approved Ist class synthetic enamel paint including thorough scrapping

207.4.1) Painting the false ceiling / walls with two coats of 1st class ready mixed exterior emulsion paint of best approved quality colour and shade including a primer coat

207.6) Painting the old iron work with two coats of Synthetic enamel paint including thorough scrapping

209.5.2) Clean removal of cement plaster from walls and rackingout joints 20mm deep

212.8) Labour charges for realigning the existing pipe lines including cost of drilling holes, providing special clamps, TW plugs etc.

213) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty (35 M.T Capacity) a.600 x 600mm

216) Dismantling the damaged One Course of Pressed Tile Roof finish in cement mortar without affecting the adjacent structures in any floors

219.1) Supplying and fixing of following Electrical item of approved ISI make a) 5 Amps Switches (flush type)

b) 15 Amps Flush Type Switch

c) Ceiling rose

d) Fan Step Regulator 100W - 1 Module - (Higher end)

e) Battern Type Bakelite Holder for Lamp

f) 5 Amps 3 Pin & 2 Pin Combined Flush Type Wall Socket only

g) 15 Amps 3 Pin Flush Type Wall Socket only

222.3) Attending the repairs of Existing Aluminium windows for any size

222.4) Attending the repairs of Existing Doors for any size

224.1) Dismantling the existing damaged RCC by manual / by using deploying machineries with out affecting the adjacent structures

235.4.1) Pressure grouting by injecting plasticized expanded grout admixture

239.1.1) Removing the IWC and dismantling the lime concrete in all floors without affecting the adjacent structures

242.2.2) Dismantling the damaged Floor and wall tiles in cement mortar without affecting the adjacent structures in all floors

247.2.3) Supply and fixing of PVC Trims (corner beading) of tiles

254.2) Providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length 5.5m height in addition of 2.5m height

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9watts LED bulb

b) 12W LED bulb

255.6.1) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

362.2.2) Supplying and fixing of Stain free nano polish Vitrified Tiles of size 600x600x8mm for flooring and other similar works

451.3.3) Supplying and fixing of water supply and sanitary fitting of heavy quality including cost of material and labour charges etc all complete. a) Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia

b) Stainless Steel Health Faucet

c) CP Angle Cock Tap

741.1) Supply and erection of 63 Amps 30 MA four pole RCCB/ELCB (Higher end) and 3 Nos of 32 Amps TP MCB

753.2) Labour charges for cleaning the existing Inspection chamber including cost of tools and plants etc.,

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

960.4.8) Roof treatment using polymer modified material applying one coat of polymer liquid and two coats of clear seal coatafter cleaning the enteries surface

981.1) Repair cracks, if any and all construction joint by cutting "V" groove (15mm x 15mm ) and fill with fosroc nitobond SBR Latex Modified putty.

M.K. GANESH

Bidder Name

Thiru J.DANIEL

M.K. GANESH