Supply and installation of CCTV Cameras with related accessories in various areas of

Supply and installation of CCTV Cameras with related accessories in various areas of Cooum river banks

7 Mtr Post – 7 Mtr long street lamp GI pole of size 88.9mm OD X 4.05 mm thick with 150mm X 150 mm square X 6 mm thick base plate, earth coil, earth bolt, nut and washer is required

Erection of 7 Mtr Post – Erection & materials required for 7mtr street lamp pole (Conventional Erection)

5 MP camera motorized - 5MP IR Vari-focal Bullet Network Camera, 5MP, 1/2.7” CMOS image sensor, low luminance, high image definition · Outputs 2688×1520 (2688×1520) @ 25/30 fps, to support max. 5MP (2592×1944) @ 20 fps · H.265 codec, high compression rate, ultra-low bit rate · Built-in IR LED, max IR distance: 60 m · ROI, SMART H.264/H.265, flexible coding, applicable to various bandwidth and storage environments · Rotation mode, WDR, 3D DNR, HLC, BLC, digital watermarking, applicable to various monitoring scenes · Intelligent detection: Intrusion, tripwire. · Abnormality detection: Motion detection, video tampering, no SD card, SD card full, SD card error, network disconnected, IP conflict, illegal access, voltage detection · Supports max. 256 GB Micro SD card · 12V DC/PoE power support · IP67 protection is required.

128 GB SD Card – To support 5 MP camera motorized, micro SDXC memory card with full size adapter, 100MB/s or equivalent required

Internet Box – Dimension size of powder coated, pole mount rack should be with suitable Height, Width and Depth for 4G router and power strip should be connected.

4G Router - Required and to support 4G LTE Router, Connectivity -Wi-Fi, Ethernet, Power -DC 12V 1A, LED indicator -Power & LTE, Operating Temperature (-25°C to 60°C), Compatibility -All SIM Cards, Speed - Min. 150Mbps

Connecting Cable – Cat- 6 patch cord, Hi- speed Gigabit up to 1000 Mbps, waterproof and durable is required.

EB Box – Dimension size of powder coated EB box should be Height – 10” Width –15” Depth - 6”, inside the a single phase, energy meter, fuse carrier, MCB should be fixed in the ilam Sheet. Dedicated lock with key shall be provided.Gauge-16

Power Strip - Power Strip 3 Pin 5A & 4 Socket with surge Protector

2 Core Cable (16 Loc ) – I.S.I Marked 2X16 SQ. MM Cable

HDPE Pipe (16 Loc ) – Size 50 MM O. D X 38 MM I.D

Cable Laying (16 Loc ) – Laying of cable along road/ Street through 50mm OD, H.D.P.E pipe (Trench size 45 cm width X 75 cm depth)

Road Cross Cable Laying (16 Loc ) - Laying of cable up to 120 SQ MM in road crossing through 4” DIA HUME Pipe

Solar panel for Power – Required Power - 150W, Power Tolerance - (+ve Tolarance), Open Circuit Voltage Voc in Volts - 22.50V, Short Circuit Current in Amps - 9.22A, Voltage at Max. Power in Volts - 18.95V, Current at Max. Power in Amps - 8.72A, Solar Cells per Module - 36/(9*4), Solar Cell type - Multi Crystaline Silicon, Front Cover - Tempered Low Iron Glass/min 3.2mm thickness, Encapsulate - Ethylene vinyl Acitate, Frame Material - Anodized Aluminium Alloy, Junction Box - IP67,4-rail,3 Diodes,1Mtr 4 Sq.mm copper wire, with MC4 Connector, Dimension –not exceeding 500/675/40 (L/W/T)mm, Battery - 12.8V 60AH Lithium ferro phosphate battery, Charger Controller - Compatible for 150W Panel

Solar Fixing Bracket - G.I bracket should be fixed at the top of the post and it should be suitable for the solar panel, angle tilt with orientation is required and adjustable brackets along with the suitable nuts and bolts are required to fix.

Charges towards Software installation, Testing, configuration, implementation of control room and project management

O&M Charges ( 3 Years ) – For all the Materials

Universys Technologies Pvt Ltd