Supply, Installation, Testing and Commissioning of Remote Diagnostic and Predictive Maintenance System in Kanpur-Ghaziabad section of Prayagraj Division.

A-Schedule -A Field IOT Devices and Sensors 171982646.40 Below/P

Supply of Field IOT Devices/ Field Transmission Unit(FTU) with Basic Functioning of capturing the parameters from the field gears like DC track Circuit, , Signals, point Machines, LC 1 Gate, etc with communication hardware to transmit the data to the station gateway system. combinations of channels and Number of channels in FTU 's/Field Iot Devices shall be as per requirement of the station yard keeping in view reliability and maintainbility of system and it shall be confirming to RDSO specification No- RDSO/SPN/257/2025 version 2.0 or latest.(Note - Unit of this item may be read as " actual used Channel").(Inspection-RDSO/RITES).

Supply of current sensors as per RDSO/SPN/257/2025 version 2.0 or latest. Note: The sensors can be external or can be mounted/integrated inthe IoT Device. (Inspection-RDSO/RITES).

Supply of voltage transducers or voltage sensor or voltage sensing channel withhigh impedence and minimum circuit loading asper RDSO/SPN/257/2025 version 2.0 or latest . (Inspection-RDSO/RITES).

Supply of vibration sensors for point machine asper RDSO/SPN/257/2025 version 2.0 or latest .(Inspection-RDSO/RITES) Above/

B-Schedule B Supply and Installation 33380443.43 Below/P

Supply of station gateway equipment system with Edge Computing to receive data 1 from various IOT Devices in field and Relay Room/Equipment Room asper RDSO/SPN/257/2025 version 2.0 or latest and Annexure of Tender document. It shall include hardwarw interface requirement with data logger , IPS , Axle counter and other signaling gears as per techncial requirement. (Inspection-RDSO/RITES) 1177050.0

Supply and installation of Enterprise Rack Server, AI Server including Storage and rack 19" 18U as per technical specification. (Inspection-RITES). Technical Specification as per Annexure -A in Tender Document.

Supply and Installation of Firewall and Layer3 switch as per technical specification. (Inspection-RITES). Firewall make & model: FG100F or higher version /or similar of reputed make. Technical Specification as per Annexure -A in Tender Document.

Supply and installation of 32 inch Monitor.Make & model: Dell-(S2721H) or higher version /or similar of HP/Acer make .(Inspection-Consignee)

Supply and installation of Client Terminal to work with rack server for various applications .(Inspection-Consignee)Technical Specification attached in TenderDocument.

Supply and installation of Online 10KVA UPS with backup 120 Minutes/32000 VAH UPS with battery and rack .(Inspection-Consignee)

Supply, Testing and Commissioning of RDPM Software per station asper RDSO/SPN/257/2025 version 2.0 or latest, and it includes Configuration and mapping of gear wise 7 signalling information in remote diagnostic software. This includes Supply of Mobile Application Software for Android , IOS base and It also include interface software requirement with data logger , IPS , Axle counter and other signaling gears as per techncial requirement, technical assistance and training to staff and officers. (up to 10 users per Station). Inspection- RDSO/RITES

Supply of Wireless(4G/LTE) Communication Interface included with M2M SIM(Inspection-RITES)

Supply and installation of Supply of 8 port Gigabit Lite Managed PoE Layer 2 Switch 9 supports 8 nos 10/ 100/ 1000 BASE-T ports, along with 2 Gigabit SFP ports, green-saving technologies as per RDSO specification no. RDSO/SPN/TC/83/2020 Rev.-2.1 or latest as per specification mentioned in Annexure-C.(Inspection-RITES)

Supply of IOT Device for Monitoring of PFC minimum 8 Digital Inputs (for Fire alarm/ ELD etc)(Inspection-RITES) Above/

C-Schedule C Installation, Testing and Commissioning 20222068.74 Below/P

Installation, Testing and Commissioning of FTU's/ Field IOT Devices per channels of Current / Voltage . Note:-Unit one number is equal to one channel

Installation, configuration and testing of non intrusive type Current Sensors

Installation, configuration and testing of non intrusive type voltage transducer/sensor

Installation, testing & Commissioning of Vibration Sensor (Inspection-Site Incharge)

Supply and installation of DC to DC Converter, 110VDC/24V DC, 10 Amp as per RDSO Specn.No.S-96/2000 or latest.Inspection: RDSO

Excavation, casting, curing of foundation and Installation and Erection of Apparatus case Half (Apparatus Case as per RDSOdrg.no.RDSO/S-11507 or latest) with contractor's own frame, cement and other material in the ra tio 1:3:6. 'E' type lock to be supplied and installed with Apparatus case. This includes filling of location foundations with river bed sand and plastering on top with a mixture of 1:4 of cement and sand. It covers fixing of lamp holder, switch and lamp etc. in Apparatus Case.

Excavation of cable trench as per cable route plan, 1 Mtr. deep and 0.3 Mtr. to 0.6 Mtr. wide at the bottom as per RDSO sketch No. SDO/CABLE LAYING/003, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest, alongside the track in normal 7 soil/strata (including soft rock). This work conforms to distances as per cable route plan and includes Refilling and ramming of loose soil. Clearing of route from bushes, etc. Covering of cable laid in trench by loose soil for a layer of approximately 50mm thickness. The work shall be done as per the extant practice on North Central Railway and instructions of the Railway Engineer at the site. In case 1 m depth of trench is not achievable due to site conditions, proportionate payment can be done. Inspection: Consignee

All work of horizontal boring and trenchless cabling along with supply, transportation and insertion of double wall corrugated pipe -(ISI marked) conforming to RDSO Spec no. 8 RDSO/SPN/204/2011 or latest, and the laying of cable in the boring under the track / road etc as per instruction of site engg. by using pipe of size 120 mm outer dia, 103.5 mm inner dia in which required number of cables to be crossed. The depth of horizontal boring should be minimum 1.0 m from rail flange/road level. (Inspection: RITES for DWC pipe and Site Incharge for Site Work.)

Laying of S&T Cables of various cores/ pairs/quads in trenches/ GIpipes/ RCC pipes/ DWC pipes/ Trunking. Thisalso includes laying of cables in trackcrossings & roadcrossings. Item includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on 9 each cable to give the cable number at each Gantry Post/hectometer post.(Cables will be meggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. Inspection:Consignee Inspection Charges: None.(unit isRM running meter)

Supply of 16/0.2 mm (0.5 sq mm) PVC insulated multi strand, single core, tinned copper conductor, as per RDSO Specn.No.IRS:S-76/89 (Amnd-3) or latest. Each coil should be of 100/200/500 meters length.Colour of the wire will be specified by the Engineer incharge.

Supply of 1.5 SQ.MM, single core, multistrand, PVC insulated copper wire,to withstand voltage upto 1100 volts. Make : RDSO Approved Vendor.

Supply of twisted pair PVC switch board cable 20 pair., conductor of size 0.6 mm. dia annealed copper conforming to IRS-TC 24/91 or ITD 1138 or latest- Inspection By Consignee

Supply, Fabrication & fixing of hylam sheet of size 10 mm thick (other dimension i.e. length and breadth will be decided by Engg-in-charge) for A/case NE type by providing all fixtures including fixing of PVC coated String Rods at the back side for cable support with contractor own 13 materials. The item includes fixing of M6 terminals or screw less/fuse blocks/HRC fuses ND type on each strip. Two extra holes on both sides of M6 terminals or screw less/fuseblocks/HRC fuse and two extra holes for fixing the sheet. Note: (i) The complete hylam sheet to be covered with either M6 terminals or screwless /fuse blocks/ND type HRC fuses as per instructions of engineer at site. (ii) Hylamsheet to be of grade P2. (iii) M6 terminals or screw less, HRC fuses will be supplied by Railway. The above item also includes fixing of Q series (GPR) relays.

Termination of cable cores on ARA terminal/fuse blocks/Disconnect type terminals, 8 way terminals block/Screw-less connectors in the apparatus cases/cable termination rack at both 14 ends. Both ends of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground. The item includes dressing ofcables, making wiring tree etc. The work shall be done as per Location/Cable termination plans and as per the instruction of Engineer-in-charge.

Supply and installation of earth electrode as per standard practice and as per NCR Drawing No. S&T/CONST/6.4/97. It includes supply of GI pipe of 3 meter length. It includes connecting the earth electrode to the equipments which are required to be earthed including digging of earth pit 3 meter deep and fixing earth electrode pipe, casting of cement concrete enclosure with cover (cover as per drawing No. S&T/CONST/6.3/97. It includes installation of 7 strand GI wires as earth lead wires, supported on MS flat size 5mm x 40 mm, soldering and nut bolt both, one end of both earth lead wire and MS flat to earth elec trode and other end to Location boxes, block equipments, power equipments, cable sheath, signals etc. as per site requirement and as per instructions given by engineer incharge.

Supply of earth enhancement material for treatment of earth pits. It includes execution also for treatment of earth pits. as per Specification No. RDSO/SPN/197/2016 Ver 1.0 or latest.

Painting of two coats of Enamel paint over one coat of Red Oxide primer after scrapping and cleaning of the surface. Paint to be of reputed make Asian/Dulux/ Berger or similar. App. Cases inside and outside to be done by Silver colour. (Apparatus Case Half)

Lettering and Numbering of all S&T gears like Signals, Loc.Boxes, Pt. Machines, TLJBs, Block joints etc. Each item to be taken as one unit.

Supply of Disconnect Terminal block for four conductor swith screwing cage/clamp 19 type, sliding switch disconnect, as per RDSO spec. RDSO/SPN/189/2004Ver.3.0or latest, for each conductor size upto2.5 sq.mm, equivalent of M6 terminals.Each terminal block equipped with two markers, on top and bottom, an end plate, two end clamps and adequate lenght of rails for fitting terminal blocks.

Supply of Indoor Telephone PVC Cables 10 pair 0.5 mm of copper conductor from reputed sources Inspection By- Consignee