REPAIR MAINT OF FLOORING ROOF SHEETS CEILING PLUMBING WORKS AND OTHER CONNECTED WORKS OF CERTAIN CENTRAL AMENITIES ZONE 7 AND DIV CAMP AT NEW CANTT UNDER GE GANGTOK

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and as directed.

All as per item No. 2.00 here-in-above but n.exc 1.5 Sqm each complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

Taking down cement plaster/terrezzo cast in situ of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Demolition of concrete in ground floor and pavings n.exc 15cm thick (un reinforced) complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and as directed.

S&F second class hardwood, glazed and skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F of flush shutters 35 mm thick, solid core construction, with block board core commercial type on both side complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification and drawing complete all as specified and as directed.

S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, ild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for toprail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with uitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES Schedule Part-II (2020) complete all as pecified and as directed.

S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified and as directed.

M&L for 150 mm size aluminium anodised cast type handles complete all as specified and as directed.

M&L for 100 mm size mild steel pressed handles, oval types, stove enameled black complete all as specified and as directed..

S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and as directed.

S&F of 100mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and as directed.

S&F of 100mm size mild steel butt hinges medium weight complete all as specified and as directed.

S&F of 75mm size mild steel butt hinges medium weight complete all as specified and as directed.

Taking up or down 20mm bore steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings or floor etc complete all as specified and as directed.

Taking up or down 25mm bore steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings or floor etc complete all as specified and as directed.

S&F 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F for 25mm steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete all as specified and as directed.

M&L for Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified and as directed.

M&L for glazed coloured ceramic tiles (350x250x7mm thick/450x300x7mm thick) on vertical surfaces such as dado set and jointed in neat cement slurry pointed in white or coloured cement to match the colour incl 10 mm thick screed bed/rendering of CM (1:4) as in wall complete all as specified and as directed.

M&L for Non - skid colured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for Non - skid colured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

All as per item No. 28.00 here-in-above but in skirting with 10 mm thick backing coat in CM ( 1:4) complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path etc (75mm thick) finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in toe wall complete all as specified and as directed.

M&L for formwork to flat surface faces of walls, retaining walls, toe wall, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in surface channels/drain including forming fair finished to drain channel complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 with using WPC @ of 3% by weight of cement in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid seperately as supply only) complete all as specified and as directed.

M&L for 5mm thick in CM (1:3) in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and as directed.

M&L for applying two coat of white washing including preparation of new or previously untreated surface of ceiling complete all as specified and as directed.

M&L for applying two coats of Oil emulsion distemper of new or previously untreated surfaces of walls complete all as specified and as directed.

M&L for applying two coats of Oil emulsion distemper including complete removal of existing treatment on wall complete all as specified and as directed.

M&L for applying wall care putty of 3 mm thick in two layers (1.5mm each layer) complete all as specified and as directed.

M&L For Preparation and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

Material and labour for applying two coats of exterior acrylic emulsion painting over a coat of alkali resistant primer including complete removal of existing surfaces including scafolding upto 15M ht and preperation of old complete all as specified and as directed.

S&F framed work such as grills, gratings etc, with ends of bars, shoulded and/or riveted or forged in spikes, framed guard bars, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and as directed.

M&L for two coats of synthetic enamel painting (1st grade quality) to new steel surface over a coat of red oxide primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.

M&L for prepartation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and apply one coat of synthetic enamel paint (1st grade quality) complete all as specified and as directed.

M&L for two coats of synthetic enamel painting (1st grade quality) to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.

M& L for prepartation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described and apply one coat of synthetic enamel paint (1st grade quality) complete all as specified and as directed.

M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite granite stone including cutting and polishing etc including 20mm thick screed bed in CM (1:6) complete all as specified and as directed

M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and as directed.

M&L for MS work as in post and struts in fencing incl embedding in concrete and cutting tops to shape as directed ,drilling holes notching for wire etc and similar works confriming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F MS bolt of dia 11 to 15 mm and length of bolt exc 5 cm and n exc 10 cm (Machine made) with hexagonal or square head at one end and screwed other with washer out of shank complete all as specified and as directed.

S&F in repairs PVC coated chain link fencing, size of mesh 50mm x 50mm made out of 4mm dia GI wire (confirming to relevant IS ) to any type of standard rails, straining bolts etc complete all as specified and directed.

S&F Mild steel flat iron work as in bands, staps supports or stays for rain water ventilating pipes, including bolts, if required hooks , heay , for large gates hookand pintel hinges plain angle cleats confirming to Fe-290 Gde E-165 all as specified and as directed.

M&L mild steel Round bars 10 mm dia of Fe-410-W (Gde.E-250)Part- I quality-A or Fe 290 (Gde -E-165) as in supports for pvc fencing complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetics enamel paint (1st grade quality) on steel surfaces over 10cm width or grith incl one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetics enamel paint (1st grade quality) on steel surfaces n exc 10cm width or grith incl one coat of red oxide primer

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

M&L for chequered cement conc. Tiles 200mm x200mm x 25 mm/ 300 X300 X 25 mm thick set jointed and pointed in neat slurry in floors and steps with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of CM (1:4) complete all as specified and as directed.

KAMLESH ENTERPRISE (BID ID -3484937)