SPL REPAIR TO BLDG NO. P-235 AND PROVN OF MANHOLE AND SEWAGE LINE IN OFFRS MESS INCLUDING SPL REPAIR TO ROAD FROMTCP-1 GATE TO QSS QTRS AT GMS

Amount

Dismantling of floor, hearth or walls tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off permises complete all as specified and directed.

M&L for Double chargred Light shade Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed.

M&L for Double chargred Light shade Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surface such as skirtings, dados etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramics coloured tiles of size 350x250x7mm/ 450x350x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specified and directed.

M&L for 10 mm thick plaster in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed.

Dismantling of Wall & Ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets Complete all as specified & directed.

S&F 12 mm thick plain/designer Gypsum Board False Ceiling with GI Frame work including all necessary drilling, cutting to fix electric items. Complete all as specified & directed with following :- (a) GI Grid Channel 30×25×20 mm of guage fixed with rawl plug & screw 450 mm centre to centre along with perimeter walls. (b) GI Channel made to shape 50×40×40 mm of 24 guage placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI Intermediate runners of size 45×10×10 mm of 24 guage fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide & 20 mm guage suspended fixed with steel fastners to roof ceiling & 1200 mm centre to centre including pluging of RCC Slab. (e) 12 mm thick gypsum board filling joints with POP & finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6), finished even and smooth (without using extra cement). Complete all as specified & directed.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surface complete all as specified and directed.

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall or concrete surfaces and applying 2 mm thick wall care putty. Complete all as specified & directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.0 Sqm each complete all as specified and directed.

S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm. Complete all as specified and directed.

S&F for 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store. Complete all as specified & directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store. Complete all as specified & directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed.

S & F in repair Europian WC floor mounted cascade pattern vitreous china with dual core flushing cistern including all fitting flush pipe etc make Hindware cat 92048 (starwhite) or equivalent of specified make. Complete all as specified and as directed.

S&F in repair Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook Cat ALD-565 make Jaguar. Complete all as specified and as directed.

S&F in repair wall mounted wash basin Make- Jaquar, Cat CNS WHT 807 size 600 X 500 X 215 mm complete all as specified and directed.

S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed.. Make-Jaquar Cat Part No.FUS-29023B.

S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower & overhead shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed. Make-Jaquar Cat Part No.FUS-29281.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed.

S&F in repair cabinet mirror, box type of size 350 x 450 mm of any colour as approved fixed to wall complete all as specified and directed.

S&F in repair fancy type bib cock with wall flange 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make-Jaquar Cat Part No.VGP-81037.

S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed. Make-Jaquar Cat Part No.AQN-7711.

S&F in repair Stainless steel Towel Rack with lower Hangers but with 3 hooks. complete all as specified & directed. Make-Jaquar Cat Part No.AHS-1581H.

S&F in repair of stainless steel small size, silver color, square shape Shower Basket, of standard size and shape complete all as specified and directed. Make- Jaquar Cat Part No.ACN-CHR-1177N.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. Make- Jaquar Cat Part No.VGP-81053.

S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make- Jaquar Cat Part No.VGP-81041.

S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed. Make - Jaquar

S&F in repair chromium plated toilet paper holder with flap complete all as specified and directed.

S & F repair Over head Shower 100 mm round shape single flow (ABS body chrome plated with gray face plate ) with rubit cleaning system Model OHS 1989 complete all as specified and directed. Make Jaquar

S&F in repair glass shelf assembly cosisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed.

S&F 75 mm bore PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement etc complete all as specified and directed.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M&L Brick work with Fly Ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

S&F in repairs for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as specified and directed.

S&F Urinal partion wall mounted of white colour size 310 X 700 mm Complete as specified and directed.

S&F in repair chromium plated towel ring with bracket complete all as specified and directed. Make Jaquar Cat AQN -7721.

M&L for Providing Precast Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate in window or door cills, lintels bressumers, steps, quoin blocks (for use with masonry) string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bounders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. & setting in 1:6 cement mortar complete with joints to match including necessary formwork if required complete all as specified & directed.

M&L for TMT Bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips Complete all as specified & directed.

M&L for TMT Bars 5 mm dia & over upto & including 10 mm dia in stirrups, spaces & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips Complete all as specified & directed.

S&F Powder Coated Aluminium frame (Minimum thickness of Powder Coating 50 micron) for doors, windows, ventilators & partition with one or more rebates including necessary joining cleats for fixing etc, for aluminium partition includes necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading screws etc Complete all as specified & directed.

S&F 12 mm thick toughened with acid texture Glass any type of fabricated glass made translucent either for privacy or decorative purposes for aluminium partition. Complete all as specified & directed.

S&F Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length i.e. within 20 mm of the length indicated) of Fe410-W (Gde-E-250) quality-A. Complete all as specified & directed.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described & apply two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer. Complete all as specified & as directed.

Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as specified and directed.

M&L Preparation of old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F 4.00 mm thick Figured glass, pin head type & glazing with oil putty in squares exc 0.50 sqm in each pane complete all as specified & directed.

M&L for preparation of newly plastered wall surfaces & applying 03 coats of white wash on newly plastered wall surfaces complete all as specified & directed.

M&L for complete removal of existing treatment on wall surfaces & applying 03 coats of white wash on wall surfaces. complete all as specified & directed.

M&L for preparation of newly plastered ceiling surfaces & applying 03 coats of white wash on newly plastered wall surfaces complete all as specified & directed.

M&L for complete removal of existing treatment on ceiling surfaces & applying 03 coats of white wash on ceiling surfaces complete all as specified & directed.

M&L for preparation of newly plastered wall surfaces & providing 02 coats of acrylic exterior weather proof emulsion paint over & including 01 coat of exterior primer on plastered surfaces complete all as specified & directed.

M&L for Complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. preparation of old wall surfaces & providing 02 coats of acrylic exterior weather proof emulsion paint over & including 01 coat of exterior primer on wall surfaces complete all as specified & directed.

Excavation in trenches in soft / loose soil, not exceeding 1.5 metre wide & not exceeding 1.5 metre deep; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan including getting out, complete all as specified & directed.

M&L for Excavation over areas, n exc. 1.50 m deep & getting out in soft/ loose soil complete all as specified & directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling & mass concrete. Complete all as specified & directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate in coping and the like including weathering slightly rounded/chamfered angles & throating with & including necessary formwork use complete all as specified & directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified & directed.

Removing surplus excavated material (soil) to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point, including spreading complete all as specified & directed.

M&L 15mm plaster in one layer in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement mixed with water proofing compound (water proofing compound to be measured & paid separately as supply only) complete all as specified & as directed.

Supply only liquid water proofing compound ISI marked.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in drains/surface channel complete all as specified & as directed.

EXTRA for forming fair finished channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified & as directed.

M&L for Providing Precast Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves & similar articles with plain faces including necessary chamfers, weatherings, throating etc & setting in 1:6 cement mortar complete with joints to match including necessary formwork if required. Complete all as specified & as directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate in benching and the like including weathering slightly rounded/chamfered angles & throating with & including necessary formwork use complete all as specified & directed.

M&L for 150 mm internal diameter, Salt-glazed stoneware drain pipes laid in trenches & jointed as specified complete all as specified & as directed.

M&L for concrete bed 1:3:6 Type C-2 to 150 mm diameter drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified & directed.

M&L for cutting into existing manholes for connecting new drains, making good to 150 mm inner diameter pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required. complete all as specified & directed.

M&L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, and making good by applying tack coat @ 5 Kgs per 10 Sqm and laying premixed bituminious macadam well rammed and sealed with paving bitumen 60/70 or VG-30 grade@ 9.8 Kgs per 10 Sqm, blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 10 tonne power roller (Iincluding supply of pre-mixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed.

M&L for Preparation of existing black top surface or bituminous macadam surfaces by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/concrete surfaces than applying evenly priming tack coat with paving bitumen 60/70 or VG-30 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen 60/70 or VG-30 grade by weight of total mix including cement filler, on surfaces rolled & compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed. Note - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

M&L for premixed bituminous macadam laid, rolled and compacted to required gradient and camber n.exc 75mm thickness (consolidated thickness) with 4% binder content of VG -30 by weight of total mix, mixed in hot mix plant and laid by mechnical paver finished complete all as specified and directed.

S&F in repair cat eyes/road studs for roadways sign permanent surface mounted type having tough poly carbonate micro replicated corner cube reflector lenses with a protective abrssion resistant ceramor coating having body of weather proof and impect resistant thermoplasit complete as per manufacturer,s instruction and as directed. (Colour :- Yellow/Red/Amber) Make: Series 290 of 3M or Road Star or Equivalent.

S&F in repair solar cat eyes/road studs size (mm) 125L x 125B x 25H including stem height 53mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof and weatherproof coating visible distance upto 400mtr LED-6 super bright amber led (3 Nos each side) yellow charged, flush frequency 1.2 Hz-1.8Hz including solar panel 3.5V/110MA & battery one PC sub ‘C’ type Ni-Cd rechargeable battery 1.2V/2.5AH temp range 20C to 70C fixed on road for roadway sign complete as per manufacturer’s instruction and directed by Engr-in-Charge Make- 3M/Avery Dennision/Dark Eye/Green/Greenlite/Road Star Cat Part No. GSR-909 or Equivalent.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc . Removing m,aterials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc complete all as specified and directed.

M&L for concealed point wiring with cable PVC insulated but unsheathed, 1.5 Sqmm, stranded copper conductor in and including PVC casing caping duly fixed on walls continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor cable for earth continuity wire , MS box including modular cover plate washer & screw and making good disturbed surface to match with existing finish with plaster complete all as specified and directed. One light point controlled by one, one way switch Make : Havells/Polycab/RR Kabel

All as per items no 101 above but One ceiling/ exhaust fan point controlled by one switch.

All as per items no 101 above but One 3 pin 5 Amps socket outlet point on independent board

All as per items no 101 above but One 3 pin 5 Amps socket point on the same board

All as per items no 101 above but One light point controlled by two two way switches

All as per srl item no 101 above but with cable 4 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. Make : Havells/Polycab/RR Kabel

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and directed. (Make : ABB/Crabtree/Anchor)

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed. (Make : ABB/Crabtree/Anchor)

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified and directed. (Make : ABB/Crabtree/Anchor)

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.. Make: ABB/CRABTREE/CONA

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. Make :ABB/CRABTREE/CONA

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC complete all as specified and directed. Make :ABB/CRABTREE/CONA

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including surface in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note:- Two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit Make : (Polycab/ Havells /Finolex)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including surface in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit Make : (Polycab/ Havells /Finolex)

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. Make: Standard/ Indo asian/ HPL/ havells

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. Make: Standard/ Indo asian/ HPL/ havells

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed. Make : Standard/ Indo asian/ HPL/ havells

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. Make : Standard/ Indo asian/ HPL/ havells

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed. Make: Standard/ Indo asian/ HPL/ havells

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and directed. Make Havells, Philips, Wipro

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and directed. Make- Havells, Wipro, Philips.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. Make :- Make Wipro, Philips, Havells.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. Make :- Havells,Philips, Wipro.

S & F recess mounting LED Endura slim pro plus ceiling light suitable for armstrong/grid ceiling complete capacity 36W, sIze 2'x2' complete all as specified and as directed including taking down the old rusted light fitting complete all as specified and directed (Make Havells Cat part No : Enduraslimpproplus2x2PLR28/36WLED857MOD & LED DRIVER 36V36WS)

S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of opening wall/existing location for fixing exhaust fan is deemed to be included in overall rate quoted). Make : CROMPTON, HAVELLS, USHA

Taking down the existing airconditioning and refixing duly cleaning and servicing complete all as specified and directed.

Taking down the exisitng ceiling fan and Refixing duly cleaning and minor servicing of any sweep and cap , applying two coats of synthetic enamel paint incl change of ball bearing complete with connecting accessories and down rod 15mm GI pipe duly modified to embedd the ceiling fan of approx 1.5 mtr heigt from the ceiling complete all as specified and directed.

M/s Bapujee Builders and Traders

ABC CONSTRUCTION COMPANY

M/s MAA BHAIRABI ENTERPRISES

M/S SIWALIK AND CO

DHABALESWAR ENGINEERING WORKS

M/s Ats Electricals

M/S JAGANNATH SASMAL