TNAPEx Guindy ECB

Amount

Dismantling Doors and Windows including removal of frames, hinges and fastenings etc., complete.

Removing old paint from iron surface with sand paper.

Brick work in Cement Mortar 1:5 (One cement and five crushed stone sand) using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc., complete complying with standard specification and as directed by the TANSIDCO Engineers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally other type of bond shall be done as directed by the Executive Engineer in charge. (As per TNBP No. 31)

Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One cement and three crushed stone sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the TANSIDCO Engineers. (Hoop iron reinforcement will be measured and paid for separately). (As per TNBP No. 31C)

Painting two coats of newly plastered wall surface with ready mixed Plastic Emulsion Paint of first class quality and approved colour over a priming coat including thorough scrapping, clean removal of dirt wherever required etc., complete complying with standard specification and as directed by the TANSIDCO Engineers. (As per TNBP No. 66A)

Painting the walls with two coats of Cement Paint over one coat of cement primer including preparation of surface curing etc., complete complying with standard specifications and as directed by the TANSIDCO Engineers. (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work) (As per TNBP No. 66A)

Cleaning and polishing floor tiles as per standard specifications.

Dadooing walls with best quality Colour Designed Glazed Tiles of size 300 x 200 x 6mm conforming to IS 15622 in Cement Mortar 1:2 (One cement and two crushed stone sand), 10mm thick with mortar plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg / sq.m neatly in all floors, curing etc., complete complying with standard specification and as directed by the TANSIDCO Engineers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works). (As per TNBP No. 39A)

Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/Cub.Mt. & shore hardness of 55. The door shall be a plain matt board as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the Aluminium “G” type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 4” in SS (Sliding door) etc., complete and and as directed by the TANSIDCO Engineers.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

Supplying and fixing Mild Steel Grills for windows, ventilators etc., complete complying with standard specifications and as directed by the TANSIDCO Engineers. (As per TNBP No. 86A)

Painting New Iron Work such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the TANSIDCO Engineers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works). (As per TNBP No. 66)

Supplying, fabricating, erecting and fixing Calcium Silicate Board False Ceiling upto a ceiling height of 4.5m from floor level using Calcium Silicate Board Plain Sheets (10mm thick).

Supplying and installing Premium Vertical Curtain blinds. The rate is inclusive of laying, conveyance, all other Tools and Plants involved in the work charges and all other incidental charges etc. complete and as directed by the departmental officer (The material quality, brand, colour, shade should be approved by the Executive Engineer before use on works)

Supply and fixing of glass doors etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and installation of Acoustical Fibre Based Wall Panelling of strand colour, kerfed edge magnesite bonded pine wood fibre core tiles of size 600 x 2400 x 20mm, density 400 kgs / m3, weight 8 kg / m2 installed by using GI strut frame work system with non-visible fasteners using PVC strut H-Spline. The GI strut frame work systems includes GI strut CC 50 cross channel having thickness 0.7mm, length 3600mm, knurled web 50, depth 50mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm centre to centre. PVC strut H-Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Strut CC50 cross channel at 600mm centers. The kerfed edge panels shall be then inserted into the strut H-Spline along their long edges of 2400mm against frame work to perfect fit with staggered short edges. The system is backlined with the acoustical infill Synthetic Polyfiber 500 gsm 50mm thick. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the TANSIDCO Engineers. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specification.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50 x 38 x 3mm @ 1.72 kg/ m,Centre mullions: 63.50x 38x 3mm @ 1.55 kg/m, Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be got approved by Executive Engineer before use.

Supply and fixing of wooden carpentry works including cost all materials, labour etc as per standanrd specifications

For Store Room Storage Units and others.

For Work Station 1 & 2 Storage Units and others.

For Seminar Hall Stage.

Supply and fixing of L Shaped Work Station with bottom units of size (5’ x 2’6” x 5’ )

Supply and fixing of pin boards for all stations including cost all materials , labour , etc as per standanrd specifications

Supply and fixing of Work Station with bottom units of size (3.5' x 2.5' x 2')

Supply and fixing of furnitures, chairs and table for all stations including cost all materials , labour , etc as per standanrd specifications

Seminar Hall Chairs

Conference Hall Chairs

Seminar Hall VIP Chairs

Conference Hall VIP Chairs

Computer Chairs for TL

Visitors Chairs for TL

MD Chair

MD Visitors Chairs

Supply and fixing of furnitures, chairs and table for all stations including cost all materials , labour , etc as per standanrd specifications

Reception Chairs

Work Station Chairs

Seater Sofa with Tea Table

3 Seater Sofa

L Shaped Sofa

Dining Tables - 2 Seater

Dining Tables - 4 Seater

Newspaper Stand at reception lounge

Supplying and fixing in position 15 / 12mm dia Brass Chromium Plated Screw Down Tap (Heavy type) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing in position of Chromium Plated Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, cutting and threading wherever necessary etc., complete complying with standard specification. (Cocks should be got approved by the Executive Engineer before use on the works).

Supplying, laying and jointing PVC Pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. Internal water supply above ground level.

25mm dia PVC Pipe

32mm dia PVC Pipe

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

25mm dia PVC Coupler

32mm dia PVC Coupler

25mm dia PVC Elbow

32mm dia PVC Elbow

25mm dia PVC Bend

32mm dia PVC Bend

25mm dia PVC Tee

32mm dia PVC Tee

25mm dia PVC End Cap

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

32mm dia PVC End Cap

25 x 20mm PVC Reducer

32 x 25mm PVC Reducer

25 x 20mm PVC Reducer Tee

32 x 25mm PVC Reducer Tee

25 x 20mm PVC Reducer Elbow

32 x 25mm PVC Reducer Elbow

25mm dia PVC Jet Nipple

32mm dia PVC Jet Nipple

Supplying and fixing in position best quality and approved make Indian made White Glazed earthernware Wash Hand Basin of size 550 x 400mm without pedestal with a pair of cast iron brackets including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylon connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets onto the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the TANSIDCO Engineers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). (As per TNBP No. 102 & 103)

Supplying and fixing in position 100mm dia Brass Chromium Plated Shower Rose with 15mm dia Chromium Plated Stop Cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position PVC / Fibre Glass Framed of size 600 x 450 x 5.5mm thick Mirror, Shelf Type with Hard Board Backing of approved quality, brand and colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks).

Supplying and fixing approved best quality Brass Chromium Plated Towel Rail 60cm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws etc., complete complying with standard specifications. (The tower rail should be got approved by the Executive Engineer before use on works). (As per TNBP No. 102)

Supplying and fixing approved best quality Brass Chromium Plated Soap Tray of size 150 x 100mm including cost of teak wood plugs, brass screws etc., complete complying with standard specifications. (The soap tray should be got approved by the Executive Engineer before use on works). (As per TNBP No. 102)

Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws etc., including supplying and fixing 10 litres capacity PVC flushing tank fixed onto wall etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe, dismantling the masonry and re-doing the dismantled masonry to original condition etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Enginer before use on works). (As per TNBP No. 102 & 103)

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm White Glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, two crushed stone sand and five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the TANSIDCO Engineers. (The water closet should be got approved by the Executive Engineer before use on works). (As per TNBP No. 102 & 103)

Supply and fixing in position of best Indian make White Glazed earthernware lipped mouth flat back Urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos. and fixing the urinals in position with necessary TW plugs, clamps, screws etc., including dismantling masnory and re-doing the same to the original condition etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc., complete complying with standard specifications and as directed by the TANSIDCO Engineers. (The urinal should be got approved by the Executive Engineer before use on works). (As per TNBP No. 102 & 103)

Supplying and fixing in position of Cast Iron Nahini Trap / Floor Trap of size 100mm x 75mm with best Stainless Steel Grating of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One lime, two crushed stone sand and five 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One cement and three crushed stone sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes etc., complete complying with standard specification. (The Nahini Trap should be got approved by the Executive Engineer before use on works) (As per TNBP No. 39A)

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW Box

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting.

Supply and fixing of ceiling fixture 250 / 300mm complete with gallery etc clear glass Opac / Crystal suitable for 7 W / 9 W LED bulb with bulb.

Supply and installation of 2.0 TR Split Type Air Conditioner Unit - 5 Star Rated with Copper Coil including 5 KVA capacity Automatic Voltage Stabilizer with time delay relay and MS stand for fixing outdoor unit.

Supply and installation of 1.5 TR Split Type Air Conditioner Unit - 3 Star Rated with Copper Coil including 5 KVA capacity Automatic Voltage Stabilizer with time delay relay and MS stand for fixing outdoor unit.

Refrigerant Piping for VRV system Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of 12.70mm dia nominal size of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable size cable tray/adjustable ring type hanger supports, jointing/brazing including accessories, insulated with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness for Suction and Liquid lines & cladded with 26G aluminium sheet all accessories as per specifications etc. as required. All connections of Refrigerant piping shall be in high grade Copper of Refrigeration quality with Eddy Current Testing and material test Certificates.

DRAIN PIPING Supply and erection of following Heavy Duty PVC pipe with all joints, reducer, necessary elbows and tees, supporting arrangements, etc.

50mm dia

25mm dia

Boson Infra India Private Limited (BID ID -1553366)

PEARL ENGINEERS CONSTRUCTION CO-OPERATIVE SOCIETY (BID ID -1554856)

ALU STRUCTURE (BID ID -1554652)