REPAIRS TO CERTAIN BR AND EM WORKS AT NO 5 BN ATT HOR SWIMMING POOL JTT AND RAKESH SHARMA BLOCK AND CERTAIN BLDG AT NDA KHADAKWASLA

Amount

S&F in repairs SS Butt hinges, heavy weight, cold rolled, mild steel length of hinges 100 mm etc all as specified and as directed.

S&F in repairs SS Butt hinges, heavy weight, cold rolled, mild steel length of hinges 125 mm etc all as specified and as directed.

S&F in repairs extruded aluminium alloy Plate handle 'D' Type fabricated type anodized 150 mm long etc all as specified and as directed.

S&F in repairs Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy etc all as specified and as directed.

S&F in repairs SS sliding door bolt 300mm long with plate type, with SS bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F in repairs Brass sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified and as directed.

S&F in repairs Aluminum anodized barrel tower bolt of extruded section 150mm long etc all as specified and as directed.

S&F in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places screw all as specified etc all as specified and as directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete etc all as specified and as directed.

S&F in repairs door closer hydraulically regulated,aluminium (die cast) body ,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F decorative type stainless steel curtain rod with brackets including holders, 25 mm dia with not less than 1mm wall thickness complete all as specified and directed.

Resecuring or easing & adjusting and refixing in same opening including taking down shutters if necessary, necessary grinding, sanding, repair/repair of damaged rail/panel of any description n.exc 2 sqm each complete all as specified and directed . Note : (i) Rate deemed to be inclusive of 1st class hardwood plain panel, style, rail required to be replaced of size matching wih existing and making the surface good by necessary polishing/painting/oiling (ii) The rates for necessary scafolding required shall be deemed to be included.

Repairs to aluminium door / window by removing from position and fixing in same position by reparing in all means. Area not exceeding 4.00 Sqm each complete all as specified and directed. Note : New aluminium section requried for repair shall measured and paid separately.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F 4 mm thick figured glass,pin head type and glazing with oil putty/ wooden beading in squares n.exc 0.5Sqm in each pane complete all as specified and directed.

S&F figured glass plate/box match to existing glazing as per site requirement including fixing adhesive/oil putty all as specified and directed

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed

ditto item No 18 above but exc 1 Sqm and n.exc 2 Sqm each .

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1 Sqm and n exc 1.50 Sqm each complete all as specified and directed

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 Sqm and n exc 4 Sqm each complete all as specified and directed

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed

S&F 2nd class hardwood Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, 30mm thick all as specified and directed

S&F 30mm 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a), complete all as specified and directed

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, & face is covered with decorative both faces veneer with lipping/frame to match complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified & directed

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F PVC door frame of size 50mm x 47mm made out of 5mm but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified & directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suplying & fixing in the frame at site complete all as specified and directed

Taking down existing aluminum chowkats or frames of any description and in any position not exceeding 4 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 mm micron) aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, hinges, tower bolt, etc complete all as specified & directed Note :- Floor door spring & sheet glass shall be measured and paid seperately

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete etc all as specified and as directed.

S&F, 5.5 mm thick sheet glass, ordinary quality and glazing with rubber packing in squares not exceeding 0.5 Sqm in each pane complete all as specified & directed

S&F, 5.5 mm thick sheet glass, ordinary quality and glazing with rubber packing in squares exceeding 0.5 Sqm in each pane complete all as specified & directed

S&F, Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturs complete all as specified and directed

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F SS Butt hinges, heavy weight, cold rolled, stainless steel length of hinges 75 mm etc all as specified and as directed.

S&F SS Butt hinges, heavy weight, cold rolled, stainless steel length of hinges 125 mm etc all as specified and as directed.

S&F SS Butt hinges, heavy weight, cold rolled, stainless steel length of hinges 100 mm etc all as specified and as directed.

S&F 150 mm aluminium anodised barrel tower bolts, extruded section and fixed complete all as specified and directed.

S&F extruded aluminium alloy plate handle 'D' Type fabricated type anodized 150 mm long complete all as specified and directed.

S&F Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy etc all as specified and as directed.

Ditto- all as per item no. 44 above but 300mm long.

S&F in repairs 2nd class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 3 sq.cm & n. exc 6 sq.cm complete all as specified and directed

S&F in repairs 2nd class hardwood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads fixed in repairs.exc 6 sq cm & n exc 13 sqcm complete all as specified and directed

M&L for newly previously treated surfaces painting two coats of Synthetic enemal paint over a coat of pink primer on new wooden surfaces complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc., complete all as specified and directed

M&L for 4mm thick Non Asbestos cement plain sheet 600 x 600 for ceiling on anodized aluminium grid work 610 x 610 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm complete all as specified and directed,

S&F asbestos cement plain building boards 4mm thk, fixed to timber /GI/MS framework with screws complete all as specified and directed

M&L for anodised aluminium snap grid 605 x 605 mm frame work for false ceiling including exposed metal frame ceiling with 12mm Gypsum Board 12mm thick in ceiling for fixing in 600mm x 600mm grid complete all as specified and directed

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions false ceiling including sunk or raised moulding pattern approved by GE fibre fixed to & including the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to Gl frame work for (605 mm x 605 mm) seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl thin layer of putty with gypsum binder, sanding the sufrace till smooth surface is obtained and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L in repairs for 2nd class hard wood clean sawn battens at 30 cm centre, sectional area exc 5 & n.exc 15 sqcm complete all as specified & directed.

M&L for 12 mm thick plywood, grade BWP type BB fixed with screws to timber frame work complete all as specified & directed.

M&L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture's instruction complete all as specifird & directed.

Material and labour for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work

S&F in repairs 12mm thk Prelaminatd particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame/Almn door/ snap grid work complete all as directed.

Dismantling timber scantling 40 Sqcm and over in section and at any position as in unframed work complete all as specified & directed.

S&F in repairs 2nd class hardwood timber in clean sawn battens or fillets complete all as specified directed.

S&F in repairs stainless steel wiremesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete as specified and directed by Engr-in-charge.

M&L in repairs 12mm thick toughened moduler glass partitaion including seamless frosted glass fixing at powder coated aluminium/SS-304 corner frame/bracket work for glass, seal by silicon sealent all as specified and directed

S&F in repairs Toilet paper holder of stainless steel fixed in repair to walls with chromium plated brass screws complete etc all as specified and as directed.

S&F in repairs Towel ring of stainless steel fixed in repair to walls with chromium plated brass screws complete etc all as specified and as directed.

S&F in repairs chromium plated tubular towel rail square rod, D type 60cm long between flanges etc all as specified and as directed.

S&F in repairs heavy duty high grade styainless steel wall mounted towel rack 600mm long with lower hanferan hooks fixed on wall complete etc all as specified and as directed. Make : Cera cat Part No F5003101 Ormond range(SS-304), or equivalent make as mentioned at list of makes in PS

S&F in repair ebello square vitreous china wash hand basin counter top, snow white, fancy type of overall size 390x390x150 mm, including 32 mm pop-up CP waste coupling full thread, CP Bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange, 450 mm long PVC Connection pipe etc complete all as specified and directed.

S&F in repairs chromium plated pillar cock tall body table top wash basins with tap hole complete all as specified and as directed.

S&F in repairs white vitreous china wash down water closet pan floor mounted size 670x410x715 mm with mild steel chromium plated or aluminised hinging device including soft closing seat cover, connection to drown pipe and flushing pipe all as specified and directed

S&F in repairs Vitreous China Urinal (flat back large) of size: 375x390x590mm with fixing accessories, including necessary cp waste coupling with bottal trap 32mm with 300mm & 175mm long wall connection pipe & wall flange cate no F850004, complete all as specified and directed

S&F in repairs urinal Valve Auto Closing System with Built-in Control Cock with wall flange alloy screwed for iron pipe 15 mm bore including urinal spreader with connection pipe complete all as specified and directed

S&F in repairs15mm Stop valves/ Angular stop cock with wall flange cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 40mm dia High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. Cm with all fittings Tee and Elbow etc and fixed to wall , floor etc.. complete all as specified and directed

S&F in repairs wash hand basin (match to existing) vitreous china white (flat back) of size 550x400mm including CI bracket 15mm dia polythene connection 450mm, 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with mild steel chromium plated or aluminised hinging device including connection to drown pipe and flushing pipe all as specified.

S&F in repairs Vitreous water closet (squatt pattern) 'long pan', size 580/630mm white with 'P' or 'S' trap, front or back inlet any pattren complete all as specified and directed.

S&F in repairs vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed . (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs urinal spreader of CP cast copper alloy for fixing with 15 mm dia pipe. (match to existing fittings) complete all as specified and directed

S&F in repairs 32mm dia waste coupling suitable for WHB of SS (half or full threaded) (minimum -weight 32mm-45 gram/40 mm-60gms complete all as specified and directed

S&F in repairs 32mm dia waste coupling suitable for urinals of SS (half or full threaded) (minimum -weight 32mm-45 gram) complete all as specified and directed

S&F in repairs 32mm dia PVC (flexible) waste pipe for wash hand basin/urinals complete all as specified and directed

S&F in repairs 15 mm PVC connections 15 mm size with PTMT nuts of length 375 mm complete all as specified and directed

S&F in repairs for providing two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup complete all as specified and directed

S&F in repairs for providing long body bib cock foam flow, with wall flange, cast copper alloy chromium plated 15mm fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs stay, suitable for health faucet complete all as specified and directed.

S&F in repairs CP Knob, suitable for basin mixture complete all as specified and directed.

S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs ABS body chromium plated rain shower rose 100mm size complete all as specified and directed.

S&F in repairs ABS body chromium plated rain shower rose 100mm size with 225mm arm-square complete all as specified and directed.

S&F in repairs plastic water closet seat, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&F in repairs PVC low level flushing cistern including brackets 10 litre capacity with inlet ball valve float, handle,flush pipe etc. complete fixed as in repairs etc complete all as specified and directed.

Taking down SWG/rainwater pipes 100mm dia (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., complete all as specified and directed

S&F Type B, 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F 75mm dia PVC (SWR) grade, Type B, single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete including taking down of existing pipe all as specified and directed.

S&F Type B, 75mm dia PVC (SWR) bends any radius complete all as specified and directed

Dismantling of cast iron 100/75 mm bore pipes jointed in cement motar including all fittings complete all as specified and directed

S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 100mm bore pipes etc complete all as specified and directed.

S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 75mm bore pipes etc complete all as specified and as directed.

S&F CI bend 100 mm bore with oval access door etc complete all as specified and directed..

S & F 100 mm size branch piece , single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches etc complete all as specified and as directed..

S&F CI cowl 100 mm size etc complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) bends any radius except fittings complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) junction single(single T), Type B complete all as specified and directed

S&F in repairs 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal, Type B, complete all as specified and directed

S&F in repairs Type B, 110mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F in repairs SS gratings 127mm circular, round/square drain jali, complete all as specified and directed

S&F in repairs PTMT gratings doom 125mm dia with waste hole, (Minimum weight 40gms) complete all as specified and directed

S&F in repairs 32mm dia PVC (flexible) waste pipe for wash hand basin/urinals complete all as specified and directed

Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores, 15mm dia pipes complete all as specified and directed.

Ditto all as per item No. 114 above but 20mm dia pipes.

Supply galvanised mild steel medium grade tubes 15mm dia bore with all fittings and fixed to wall , floor etc.. complete all as specified and directed

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 15 mm bore pipe.

Supply galvanised mild steel medium grade tubes 20mm dia bore with all fittings and fixed to wall, floors etc.. complete all as specified and directed

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 20 mm bore pipe

S&F in repairs of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors 16mm outer dia including all fittings like elbow, tees, sockets, union, nipple, adaptor etc complete all as specified and directed

S&F in repairs of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors 20mm outer dia including all fittings like elbow, tees, sockets, union, nipple, adaptor etc complete all as specified and directed

M&L for cutting chases, pinning on brick/stone, concrete wall in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth (area of C/S in cutting not exc 8 cm x 6 cm) complete all as specified and directed

S&F in repairs PVC flush tank ball cock set complete all as specified and directed.

S&F in repairs 15 mm bore GI tank nipple complete all as specified and directed.

S&F in repairs spindle for 15mm/20mm CP / brass bib cock, stop cock & concealed stop valves, WHB mixtures etc complete all as specified and directed.

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc., complete all as specified and directed

M&L for rendering 15 mm thick plaster in CM (1:6) on wall surface finished even and smooth without using extra cement complete all as specified and directed

M&L for newly plaster surface on wall and applying two coats of distemper oil emulsion over a priming coat with chalk whiting preparatory to distembering complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for coloured Glazed ceramic tiles in vertical surface 300x200x7mm or 450X 300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick backing coat in CM 1:4 etc complete all as spd and as directed

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed

M&L for 300X300X10mm thick Vitrified glazed designer dura stone tiles of any approved colour, heavy duty machine pressed including 15 mm thick screed bed of CM (1:6) in floors complete all as specified and directed

M&L for Non skid/Matt finish full body vitrified tiles 7 to 8 mm thick area of each tile exceeding 0.16 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM (1:6) complete all as specified and directed

M&L for glazed vitrified digital coloured tiles in verticle surfaces of pattern approved by GE, size 600x1200x10mm thick set, with Roff Vitro adhesive by Pidilile or equivalent and pointed in white or colour cement grout to match the tiles, including 10mm thick plaster in C:M (1:4) as a backing coat complete all as specified and directed

M&L for Vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6). complete all as specified and directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded & pointed any type of morter complete all as specified and directed

M&L for 20mm thick Marble (of any type Milky white or any colour and shade matched with existing floor of HOR or any floor) tiles machine cut, in skirting/ dado laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 15 to 20mm thick quartzs (of any type ) work (table rubbed and polished) of any color leather finished top surface, as in floor, platform, steps, jambs, pillars, window cills, laying over 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces complete all as specified and directed

M&L for 16 to 18mm thick granite (of any type any colour) work (table rubbed 7 polished ) in window door cills/jambs, platform like in cement morter (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as specified and directed.

M&L for 16mm thick granite both side polished for urinal partition / vertical surfaces etc. in cement morter 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as specified and directed

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified.

M&L for granite work (black, lakha red, flamed where ever necessary) (table rubbed 7 polished ) 16-18mm thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, steps, jambs, pillars, window cills, laying over 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces complete all as specified and directed

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including polishing complete over and including 20mm thick screed in CM 1:3 complete all as specified and directed

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including polishing complete over and including 20mm thick screed in CM (1:3) complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as directed and as specified.

S&F in repair Co-polymer Poly-propylene (CP-PP) white swimming pool overflow pin grating size 100mm to 400mm length, match to existing pin complete all as specified and directed.

Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as directed

M&L for removing of existing plaster surface upto base level & cleaning the surfaces of roof/wall with wire brush with water thoroughly to remove all dust/dirt and loose particles, and applying 2 coats of asian smart care damp proof 2K on an interval of 4 to 6 hrs (1st & 2nd coat should be perpendicular direction) as per manufacture instruction, after plaster the surface and apply painting to match the existing surface, complete all as specified and directed

M&L for preparing old plastered / concrete surfaces of roof/wall with wire brush with water thoroughly to remove all dust/dirt and loose particles and applying 3 coats of Dr fixit Newcoat / Asian paint damp proof on roof/wall surfaces including crack seal sealent if required at crack portion of roof/wall all application as per manufacturer instructions and including waranty certificate provided by applicator/company complete all as specified and directed.

S&F Framed work for framed chajja, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete including dismantling of exiting all as specified and directed

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete including dismantling of exiting all as specified and directed

S&F in repairs 1mm Plain, galvanised, mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pie-ces can be cut) complete all as specified and diredted.

Material & Labour for providing and fixing stainless steel (Grade 304) grating / railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement for swiming pool No 3 etc., complete all as specified and directed

M& L for cutting holes in brick wall / stone wall / PCC block walls exc one brick but not exc two brick in cement mortar for inserting holdfasts and making good dismantling portion in cement mortar 1:3 or cement concrete (1:2:4) type B-1 as required complete all as specified and directed

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) type C-1 (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed

M&L for grinding / Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete etc complete all as specified and directed

M&L for complete removal of existing treatment form wall to make the surface free from dust, loose paint and loose plaster by scrapping manually / mechanically as directed by Engr-in-charge (nails, screws if any to be removed properly before scraping) complete all as specified and directed.

All as per item No 160 above but for Ceiling surface complete all as specified and as directed.

M&L for providing and applying water proof cement base putty of 1mm thick over prepared old plastered / old painted surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed.

All as per item No 162 above but for Ceiling surface complete all as specified and as directed.

M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

All as per item No 164 above but for Ceiling surface complete all as specified and as directed.

M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

All as per item No 166 above but for Ceiling surface complete all as specified and as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

All as per item No 168 but for Ceiling surface complete all as specified and as directed.

M&L for one coat of acrylic water based exterior grade primer on wall @ 0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.

M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior quality emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in one coat @ 0.75 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. etc complete all as specified and directed.

M&L for preparation of old wooden / POP insulation surface (Q and R Sqn Wall), smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specified and directed.

M & L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty,POP complete all as specified and directed.

M&L for preparing the old wooden surfaces of any description, with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and apply one or more coats of french polishing till the desired finish is obtained complete all as specified and directed.

M&L for preparation of old treated wooden Surfaces of any description, over 10cm in width or girth, fill the gap or crack, hole with wood filler or POP, putty etc including cleaning and make the surface smooth and applying One coat Varnishing etc till the surface became fine glosy finish complete all as specified and directed.

M&L for one coat of aluminium paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed

M&L for one coat of aluminium top reflecting coating above the membrane surfaces incl preparation of old painted APP modified membrane exc 10 cm width or girth complete all as specified and directed. Note: Quoted Rate is deemed to be included for necessary scafolding required.

M&L for one coat of synthetic enamel paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed

M&L for preparation of old treated Wall/Ceiling surfaces and applying one coat of luster paint complete all as specified and directed. Note: Quoted Rate is deemed to be included for necessary scafolding required.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L repair of point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b)Ditto all as per item no.182 above but One 3 pin 6 Amps socket out let point on independent board.

(c)Ditto all as per item no. 182 above but One 3 pin 6 Amps socket out let point on same board.

(d)Ditto all as per item no. 182 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

(e)Ditto all as per item no. 182 above but One light point controlled by Two 2-way switches

M&L repair of point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit

S&F in repair PVC / polycarbonate lamp holders batten/Angle type complete all as specified and directed

S & F in repair of switch piano flush type 6 Amps SP one way complete all as specified and directed

S & F in repair of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed

S & F in repair of switch socket combination with box of 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed

M&L in Repair of fan regulator switch/socket type electronic step type suitable for 1200/1400 mm sweep fan complete all as specified and directed

S & F in repair of switch piano type 20 Amps SP one way complete all as specified and directed

S & F in repair of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed

S & F in repair of switch socket combination with box of5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified.

S&F in repair for ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

M&L in repair of wire less door bell AC 230 volts single phase ding dong type complete all as specified and directed

S & F in repair of PVC unbreakable surface boxes of 1 gang box complete all as specified and directed

S & F in repair of PVC unbreakable surface boxes of 2 gang box complete all as specified and directed

S & F in repair of PVC unbreakable surface boxes of 3 gang box complete all as specified and directed

S & F in repair of PVC unbreakable surface boxes of 4 gang box complete all as specified and directed

S & F in repair of PVC unbreakable surface boxes of 5 gang box complete all as specified and directed

S & F in repair of PVC unbreakable surface boxes of 6 gang box complete all as specified and directed

S & F in repair of PVC unbreakable surface boxes of 7 gang box complete all as specified and directed

S&F in repair modular switch piano type 10 amps one way one module complete all as specified and directed

S&F in repair modular switch piano type 10 amps two way one module complete all as specified and directed

S&F in repair modular Bell push, 10 Amp with neon indicator one module complete all as specified and directed

S&F in repair modular switch piano type 20 amps one way one module with neon indicator complete all as specified and directed

S&F in repair modular Socket, 6A - 2/3 pin 2 module complete all as specified and directed

S&F in repair modular Socket, 6/16A - 2/3 pin 2 module complete all as specified and directed

S&F in repair of 1 module Blanking plates complete all as specifed and directed

S&F in repair modular step type fan regulator 100W, 1/2 module complete all as specified and directed

S&F in repair for white cover plate with frame 1 or 2 module complete all as specified and directed.

S&F in repair for white cover plate with frame 3 module complete all as specified and directed.

S&F in repair for white cover plate with frame 4 module complete all as specified and directed.

S&F in repair for white cover plate with frame 6 module complete all as specified and directed.

S&F in repair for white cover plate with frame 8 module complete all as specified and directed.

S&F in repair for white cover plate with frame 12 module complete all as specified and directed.

S&F in repair for white cover plate with frame 16 module complete all as specified and directed.

S&F in repair for white cover plate with frame 18 module complete all as specified and directed.

S&F in repair for squre box, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

S&F in repair for round plate, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

Supply only 9 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and directed.

S&F in repair of 10 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed

S&F in repair of 20 watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed

S&F in repalcement Surface type LED Downlight lights 12 W Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed

S&F in repalcement Surface type LED Downlight lights 30 W Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed

S&F in Repair COB light 12W LED Tiltable surface mounting and Environmental friendly, new generation, energy saving, decorative IP 66 complete all as specified and directed. Make: Luker cat part no. LCOBSP12 or equivalent make as mentioned at list of makes in PS

S&F in repair LED building security light fiitting 30 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed . Make- Luker LST-24SEN or equivalent make as mentioned at list of makes in PS

S&F in repair Decorative wall mounting Wall Lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed

S&F in repair Decorative hanging table lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed

S&F in repair Decorative hanging with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed

S&F in Repair surface/recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully complete all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.

S&F in repair of GI pipe bracket of 30 mm dia 1 mtr long bend to shape for street light fitting made out of 30 mm dia GI light grade pipe fixed on building/pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.

Supply and fixing repair of rigid non-metallic PVC casing capping, double lock type/PVC conduit (ISI marked) of size not less than 25mm, including all necessary accessories (e.g., bends, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring, complete as specified and directed by the Engineer-in-Charge. This includes: a) Supply of 25mm or larger rigid non-metallic PVC casing capping/conduit (ISI marked). b) Supply of all necessary accessories (bends, elbows, connectors, saddles, screws, etc.).c )Securing loose wiring within the casing/conduit. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations.f) Testing of the wiring after completion. Notes: Rates shall include the cost of all materials, labor, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work.

Supply and installation in replacement of flexible conduit pipes, ivory grey,white in colour, with a minimum internal diameter of 25mm. The conduit shall be of a type suitable for [Specify application, e.g., electrical wiring, data cabling, etc.]. Installation includes cutting, bending (where necessary), and securing the conduit as per the approved design and Engineer-in-charge instructions.

Supply and fixing repair of rigid non-metallic PVC cable tray , double lock type (ISI marked) of size not less than 80x40mm, including all necessary accessories (e.g.,Bends (flat, internal,external), Risers, Couplers, Dividers, Support brackets, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring, complete as specified and directed by the Engineer-in-Charge. This includes: a) Supply of80x40mm or larger rigid non-metallic PVC cable tray. b) Supply of all necessary accessories (Bends (flat, internal, external),Risers,Couplers,Dividers,Support brackets, elbows, connectors, saddles, screws,round plate etc..c )Securing loose wiring within the cable tray. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations.f) Testing of the wiring after completion. Notes:Rates shall include the cost of all materials, labor, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work.

Taking down Careful dismantling and removal of existing sub-main wiring, including cables, conduits, trunking, and all associated fixtures, regardless of type and size.This includes all necessary materials and labor to restore the surfaces to their original condition, or to an agreed upon condition.All work shall be carried out in accordance with the Engineer-in-charge's instructions and any relevant project specifications.If the wiring is to be salvaged, great care must be taken during removal complete all as specified and directed

M&L repair of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

Dittto all as per item No 239 above 2 x 2.5Sqmm

Dittto all as per item No 239 above 2 x 4 Sqmm

Dittto all as per item No 239 above 2 x 6 Sqmm

DARSHAN ENTERPRISES (BID ID -3306884)

Sunil Constructions (BID ID -3307089)