Godiali to Arikama via Sagargaon_Road_SDBC and RCC Drain-100 mtr-3.840 to 4.594 1.050 to 1.150

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of grith upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means andstacking of serviceable materials to be used or auctioned upto a lead of 1000m incuding removal and disposal of top organic soil not exceeding 150mm in thickness as per direction of Engineer-in-charge.

Providing 37.5 mm thick BUSG in one layers applying tack coat using 3.0 kg of bitumen /10 sqm, using 0.45 cum of 25mm to 40mm size H.G. metal & 0.12 cum of 12mm size h.g. chips for 10 sqm . etc. complete. etc. complete. as per direction of Engineer-in-charge

Providing & applying tack coat over the bituminous surface with bitumen boiler fitted with spray set using 0.20Kg / Sqm. area including clearing the surface etc. complete for finished item of work induding cost, conveyance, royalty, taxes, labour, T&P, all other matermls required for the work etc. complete as per direction of the Engineer-incharge.

Providin & laying Semi dense bituminous Concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to site, laying with a hydrostatic paver finisher with sensore control to the required grade, level & alingment, roling with smooth wheeled,vibratory & tandem rollers to achieve the desire compaction as per clause 508 of MoSRT&H Specifications for road and bridge works (4th Revision) Page -175 item - 47 as per direction of Engineer-in-charge.

Providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.

Construction of R.C.C.M 25 grade in cast-in-situ with 20 mm size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 etc. complete as per direction of the Engineer-incharge.

Supplying,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.(AR,P-52) etc. complete. etc. complete. as per direction of Engineer-in-charge

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement,thickness as per design, over a prepared sub-base, with 43 grade cement of any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125micron thick polythene film,wedges,steel plates including levelling the form work as per drawing), spreading the concrete with shovel,rakes,compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contaction and expansion, construction joints, applying debonding strips, primer, sealant,dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved,curing of concrete slabs for 14-days, curing compound (where Spefied) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 etc. complete as per direction of the Engineer-incharge.