Name of Work K II head. Sub head Restoration of road Cut by Sewer Maintence, Water Supply, Sewer conncetion NDMC at Hanuman Road and different location in Connaught Place.

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.50metre in width or 10square metre on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m All kind of soil

Supplying and filling in trench with manufactured sand, including watering, ramming, consolidating and dressing complete.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Construction of granular sub-base by providing close graded Material nforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With medium setting bitumen emulsion On W.B.M / W.M.M. @ 0.4kg/sqm

Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With medium setting bitumen emulsion On bituminous surface @ 0.25kg/sqm

Repairing the pothole/defect area up to a depth of 50mm using Infrared Pothole/road repair machine No.1 by heating the defect area using Infrared heating machine /heater to soften the defect area up to required thickness, recycling the existing asphalt by rejuvenating the softened material with rapid setting emulsion RS-1 @ 1.8 Ltr per SQM of area and adding fresh bituminous mix of the same grade to cover the pothole, heating the whole mix up to a suitable temperature, Scarifying/spreading the mix to the road surface evenly and compacting vibratory plate compactor having 1.5T on compaction capacity for a seamless finish with the existing road level surface complete as per the direction of Engineer-in- Charge

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting and unloading the same at any C & D waste management site within 25 Kms lead i.e. Shastri Park/Burari/Mundka including weighing at plant etc complete as per direction of Engineer in-charge. Weighing and unloading at the plant shall be as per procedures/rules of the plant management. The rates are inclusive of all operations. Labours, leads and lifts from site of work to the C & D waste plants. The processing fee of C & D management at prescribed rates will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts.