AMC of Int and Ext installation of INA Colony

Amount

SH-I- Operation & maintenance

Running operation and maintenance of Internal and External electrical installations, water supply pumps and DG sets etc.on all days for one month at INA colony pocket A & B, Guest House, Medical Centre etc in shift basis as per the requirement of works. The contractor has to deploy the following minimum man power per day including Saturday , Sunday & holidays etc, as per the instructions of Engineer-in-charge or his authorized representative. i) Supervisor – 1 ii) Operator (Highly Skilled)– 1 iii) Wireman – 7 iv) Wireman cum DG operator - 6 v) Pump Operator – 03 vi) Khallasi – 14

Add for experience in number of years (i.e. minimum 02 years) for following category of item no.1 as above (i) For Supervisor - 01 No. (ii) For Opeartor (Highly Skilled)- 01 No. (The Agency has to quote the rate in conformity with para no.12 (ii) of special condition of contract)

SH-II: Miscellaneous minor repair works for E&M installations, as per specification,as & when required with prior approval of Engineer in charge.

Complete servicing of different type & model ceiling fans i/c greasing, replacement of cotter pin, rubber bush, bolts & nuts i/c dismanteling, reinstallation of fan at the existing location as reqd.(excluding replacement of bearing )

Painting of following installations in position with synthetic enamelled paint by spray/ brush painting by one or more coats including scraping, cleaning of surface & writting actual nomenclature with highlighted colour on the installation after painting etc.

Distribution boards /out door panel/ Feedar piller etc.

Post top poles singal /double Arms, height up to 4 mtr

Street light pole height above 7 to 9 mtrs

Labour charges for lowering & lifting i/c dismantling of different sizes submersible pump set/ jet assembly alongwith pipe lines, cable from the existing bore, as & when reqd. re-installing back of the same i/c cost of cable joint & minor items such as nut bolt & rubber packing etc. ( charges for repairing or rectification of fault of pump/ motor will be paid separately).

Providing & replacement of top and bottom bearing / bush of ceiling fans i/c associated work as per the requirment of following fans i/c dismantling and reinstallation of fan with testing, commissioning etc.as reqd.(Dismantled material shall be the property of tenderer)

Light weight ceiling fan/ Exhaust fan

Medium weight ceiling fan

12" Exhaust fan

Providing and replacement of damage/ rusted GI pipe line of submersible/ monoblock pump set, as & when reqd. with following size i/c threading cutting and accessories such as flange, socket, gasket, nut - bolts, washer etc. as reqd. I/c transportation to site of work.( make: Tata/Jindal)

2" dia GI 'B' class Pipe

3" dia GI 'B' class Pipe

Providing and fixing wood wool pads (1 set of 3 nos.) of good quality of suitable size for following capacity desert cooler at different locations & floors i/c dismantling, existing pads if reqd.

4000 cum/hr.

Rewinding of the following ceiling fan, desert cooler motors etc i/c dismanteling, transportation to workshop & back. (Dismantled material shall be the property of tenderer)

Ceiling fan of all makes and models.

Desert cooler fan motor of all makes and models.

Exhaust Fan of all makes & model up to 300mm.

Exhaust Fan of all makes & model up to 450mm.

Rewinding of the following water pump motors and replacement of Bearing , bushes, water seal of pump motors etc i/c dismanteling, transportation to workshop & back i/c connection, testing & commissioning as reqd. (Dismantled material shall be the property of tenderer)

3 HP 3 phase mono block submersible pump Motor

5 HP, 3 phase submersible pump motor

1 to 2 HP Submersible Pump Motor

0.5 to 1 HP monoblock pump motor

3 HP 3 phase mono block submersible pump Motor

5 HP, 3 phase submersible pump motor

1 to 2 HP Submersible Pump Motor

0.5 to 1 HP monoblock pump motor

Repairing of following capacity of submersible/ monoblock water supply pumps & replacement of all required unserviceable parts such as discharge bowl/ discharge bearing, intermediate bowl/ impeller/ upthrust coller/ intermediate bowl bearing/ pump shaft/ Suction inlet/ suction adopter/ pump motor coupling / water seal /rotar polishing & tunning of roter etc i/c lath work, dismanteling, transportation to workshop & back and reinstallation i/c , testing & commissioning as reqd. (Dismantled material shall be the property of tenderer)

5 HP 3 phase submersible pump

3 HP 3 Ph mono block submersible pump

1 to 2 HP Submersible Pump

5 HP 3 phase submersible pump

3 HP 3 Ph mono block submersible pump

1 to 2 HP Submersible Pump

Detection of LT cable fault by using LT cable fault locator machine on the route of cable laying at site & locate the fault at pin-pointing i/c excavation of soil etc as required.

SH-III- Supply of the following items as per specifications & reqired Makes, as and when required with prior approval of engineer in charge.

36 watt Electronic Ballast suitable for 36 watt FTL

36 watt fluorescent lamp

36/40 Watt FTL Starter

Remote Bell

32 Amp. SP MCB 10 KA 'C' series

32 Amp. DP MCB 10 KA 'C' series

40 Amp. DP MCB 10 KA 'C' series

63 Amp. DP MCB 10 KA 'C' series

5/6 Amps. P/T switch.

5/6 Amps. Bell push switch.

15/16 Amp P/T Switch

3 pin 5 /6 Amp P/T Socket

5 pin 15/16 Amp P/T Socket

Door bell ding-dong.

16 Amp & 6 Amp plate type switch socket assembly (Box Type)

3 pin 15Amps plug top

Supply of 12 volt , 25 plate 180 AH storage type lead acid battery i/c charging etc as reqd. (as and when required)

Batton holder (Polycarbonate)

450 Watt Fan step electronic type regulator.

15 Amp Four outlet socket power strip

6 Amp Four outlet socket power strip

1.5 MFD capictor

1.75 MFD capictor

2.5 MFD capictor

18 watt submersible pump for Desert Cooler

1.5 sqmm, FRLSH, PVC single core copper cable (90 mtr. length )

4.0 sqmm, FRLSH, PVC single core copper cable (90 mtr. length )

Battery water

PVC Gang Box for the following switches / Sockets-

2 nos. 5 Amp switch

1 no. 15 Amp switch & 1 no. 15 Amp socket.

PVC Channel of ISI marked heavy duty 1.6 mm thick of following sizes (one channel of 2 mtr. Length) :-

Supply of MCCB's of following rating:-

4 Pole 35 KA 160 Amp.

4 Pole 35 KA 125 Amp.

4 Pole 25 KA 63 Amp.

4 Pole 35 KA 250 Amp.

Twin Twisted Flexible copper wire 23/76 (90 mtr length)

18 Watt LED T8 tube rod

LT Insulating Rubber Mate minimum 3 mm Thick ISI Mark ( Size : 1M x 2M) ( Make: Jyoti or equivelent)

Industrial plug Top 3 Pin, 20 amp

Industrial Socket 3 Pin, 20 amp

18 watt LED tubelight with fitting

3P MNX 32 power contractor

Overload relay

Relay range 6-10 amp

Relay range 9-15 amp

Relay range 14-23 amp

Single Phase Preventor

5 watt LED bulb (pin type) ,

15/16 Amp One Way switch.

5 pin 15/16 Amp Shuttered Socket

DOL Starters for 10 HP 3Phase motor

Star Delta Starter for 15HP 3Phase motor

1x36/40 W FLT fixture,

SS Cordless Electric Kettle

Heat Convector (Make: Bajaj, Model No.- RX19 or as Approved by EIC )

Room Heater double rod, (Make: Bajaj, Model No. Del or as Approved by EIC)

Room Heater (oil type), (Make: Havells, Model No. GHROFADW290 or as Approved by EIC)

Ceiling Fan 1200mm

Wall Fan 400mm

Pedestal Fan 450mm

Exhaust fan 220V-50Hz,200mm, Non metallic body

15 Litre capacity vertical type water heater (Geyser), 5 star

12 watt surface mounted round type LED fitting (IP 54)

Exhaust Fan , 300 mm sweep, 1300 rpm, heavy duty type, meatl body

Fan regulator, 450 watt, Modular type, double module

Bell push button, modular type, single module

3 core PVC insulated and PVC sheathed, round type 1.5 sq mm cable (100

3 core PVC insulated and PVC sheathed, round type 2.5 sq mm cable

SH-IV Misc. Electrical Works

ANAND AND COMPANTY

ABHISHEK ASSOCIATES

S. N ELECTRICALS

SRS ENGINEERS

Manish Electricals