REPAIR MAINTENANCE OF EM INTERNAL EXTERNAL SERVICES DG SET AND MISC WORKS AT CDA COMPLEX PATNA AND REPAIRS TO VEHICLE HELD WITH GE DANAPUR CANTT AND ITS ANCILLIARY WORKS UNDER GE DANAPUR CANTT

Amount

Taking down carefully copper/aluminium point wiring (Light,fan,socket or power) complete fitting such as switches, ceiling rose, regulator, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. complete all as specified and directed.

M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit complete all as specified and directed.

All as per item No 2 above but one 3/5 pin socket out let 5 amp on same board with other switches complete all as specified and directed.

All as per item No 2 above but socket out let 5 amp on independent board.

All as per item No 2 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified and directed

All as per item No 2 above but one light point controlled by two two way switches.

All as per item No 2 above but socket out let 3/6 pin 15 Amp with 2.5 sq mm size copper conductor for power point on indipendent board.

Supply & Fixing switch modular single pole, one way 6 Amp ,01 module.

Supply & Fixing switch modular bell push 6 Amp ,01 module.

Supply & Fixing switch modular , two way 6 Amp ,01 module.

Supply & Fixing switch modular single pole, one way 16 Amp ,01 module.

Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module.

Supply & Fixing modular socket 6/16 Amp-2/3 pin combined ,2 module.

S&F Modular electronic type step fan regulator, 120 W-2 module.

M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded , single core copper conductor cable 1.50 Sqmm suitable for fixing in concealed conduit 20 mm dia with sunken pressed steel terminal boxes 2 mm thick of required size , duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer including 3 mm thick plastic laminated sheet cover housing switches ,socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor cable 1.50 Sqmm used as common earth wire and connected to common earth dolly & drawn in same conduit complete all as specified and directed.

All as per item No 15 above but one 3/5 pin socket out let 5 amp on same board with other switches.

All as per item No 15 above but socket 5 amp on independent board.

All as per item No 15 above but One bell/ buzzer point controlled by one push button with other switches on independent board with cables 1.5 sq.mm size

All as per item No 15 above but one light point controlled by two two way switches.

All as per item No 15 above but socket out let 3/6 pin 15 Amp with 2.5 sq mm size copper conductor for power point on indipendent board.

Supply & Fixing switch piano flush type single pole one way 5 Amp.

Supply & Fixing bell push flush type switch.

Supply & Fixing switch piano flush type two way 5 Amp.

Supply & Fixing socket 3/5 pin 5 Amp flush type.

Supply & Fixing switch socket combination 3/6 pin 5/15 Amp universal type.

Supply & Fixing electronic stepped type fan regulator.

Supply & Fixing call bell ding dong type 230 Volts AC supply.

Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete.

Supply & Fixing lamp holder PVC / Ploycarbonate type.

Taking down carefully copper/aluminium power/sub main wiring of any size / type all as specified and directed.

M & L for power/sub main wiring with four runs of single core 6 sqmm size and two run of single core 6.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC concealed conduit complete all as specified and directed.( Note - Four runs of 6 sq mm single core copper conductor and two runs of 6.0 Sq mm copper conductor shall be measured as one unit length.)

M & L for power/sub main wiring with two runs of single core 4 sqmm size and one run of single core 4.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC concealed conduit complete all as specified and directed.( Note - two runs of 4 sq mm single core copper conductor and one runs of 4.0 Sq mm copper conductor shall be measured as one unit length.)

M & L for power/sub main wiring with two runs of single core 6 sqmm size and one run of single core 6.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC concealed conduit complete all as specified and directed.( Note - two runs of 6 sq mm single core copper conductor and one runs of 6.0 Sq mm copper conductor shall be measured as one unit length.)

Supply & fixing earth plug enclosure (plug and socket ) with MCB, SP 20 Amps modular type complete all as specified and directed.

Taking down existing light fitting of any type,make & capacity .

Supply and fixing energy saving LED lights fitting 1x 20W, 220V, AC, natural white / warm whitedecorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including its all acessories complete all as specified and directed .

Supply and fixing engineering plastic batten with white acrylic cover 09 watt LED light ( integrated LED channel) natural white / warm white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing recess/surface mounting LED luminaire of size 600 mmx 600 mm white 35/36 watt, 230 volts with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

Supply & Fixing recess/surface mounting sleek round / Square LED downlight luminaire white 15 Watt , 230 Volts, complete with driver, connector block ,etc, complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

Supply & Fixing integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted, complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

Supply & Fixing in replacement Bldg security LED light fittings with pressure dia cast aluminium of 35 watts and including and connceting up ceiling rose and fittings with 3 core, PVC insulated multistranded copper conductor cable of 1.5 Sqmm complete all as specified and directed

Supply & Fixing in replacement LED lamp 12 Watt.

Supply & Fixing in replacement LED lamp 9 Watt .

Supply and fixing rechargeable LED bulb Cool Day light 9/10 watts having Luminous Efficacy range lies between ( ≥100 and <105 ) lm/W,CRI 80 as per BEE guidelines Long Life 25000 hours , colour temp 6500 K , frosted glass min back up time 4 Hrs after charge, In-built surge protection of 3 KVA 220V,AC complete all as specified and directed.

Taking down old U/S MCCB/MCB DB of any type, make complete all as specified and directed.

Supply & Fixing sheet metal enclouser MCCB DB IP 43 double door bus bar neutral link earth bar and din rail TPN 4 way .

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 12 way.

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way.

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail TPN 4 way .

Taking down old U/S MCCB / MCB of any type,make complete all as specified and directed.

S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,100 Amps with breaking capacity 16 KA fixed type all as specified and directed.

S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,125 Amps with breaking capacity 16 KA fixed type all as specified and directed.

Supply & Fixing MCB TPN 16 to 32 Amps 415 volts, 10KA "C" curve.

Supply & Fixing MCB TPN 40 to 63 Amps 415 volts, 10KA "C" curve.

Supply & Fixing MCB SPN 32 Amps 240 volts, 10 KA, "C" curve.

Supply & Fixing MCB SPN 40 to 63 Amps 240 volts, 10 KA, "C" curve.

Supply & Fixing MCB SP 5 to 32 Amps 240 volts, 10 KA, "C" curve.

Taking down ceiling fan of any sweep from its position opening the fan for inspection of worn out/ unserviceable parts. Repairing with replacement of unserviceable parts if required cleaning of blade and body properly oiling, greasing of bearing/ bush all as specified and fixing the fan in position all as specified and directed. Note :- Parts to be replaced will be measured and paid separetly).

M & L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning of dust etc.

Transporting of unserviceable ceiling fans of 1200 mm sweep to work shop and carrying out rewinding to the starter by using superior quality enameled copper conductor of matching size in weight gauge, application best quality of supper enameled insulation material tapping varnishing drying and re-fitment with testing complete all as specified and directed.

Ditto but for ceiling fan of 1400 mm sweep 230 volt AC 50 Hz.

Ditto but for heavy duty exhaust fan 300mm sweep 230 volt AC 50 Hz.

Ditto but for pedestal fan 400mm sweep 230 volt AC 50 Hz.

Ditto but for wall mounting fan 400mm sweep 230 volt AC 50 Hz.

Supply & fix in replacment fans ceiling having copper winding motor ,complete with remote and other accessories 230 V,50 Hz AC ,1200 mm sweep. With service value 6 .00 BEE 5 star rated with BLDC motor (Brushless direct current motor) complete all as specified and directed.

Ditto but for pedestal fan metal body 500mm sweep 230 volt AC 50 Hz.

Ditto but for wall mounting fan metal body 400mm sweep 230 volt AC 50 Hz.

Supply & fix in replacement exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 300 mm sweep with louver including testing and commissioning complete all as specified and directed at site .

Supply and fixing in replacement capacitor 2.5/3.15 mfd. .

Supply and fixing in replacement fan blade suiatable for 400mm sweep pedestal fan/ Wall mounting fan.

Supply and fixing in replacement fan blade suiatable for 300 mm sweep exhaust fan.

Supply and fixing in replacement ball bearing of size 6201 / 6202 / 6203 NBC suiatable for ceiling fan / exhaust fan.

Supply and fixing in replacement rubber bush ( reel type) suiatable for 1200mm/1400mm sweep ceiling fan.

Repair to window / Split type Air conditioner by replacement of unserviceable sealed unit i.e.compressor (rotery or hermetic) ,cleaning of system properly with CTC and charging the refrigerant recommended by manufacturer of AC including commissioning and testing complete all as specified and directed by Engr - in - Charge at site for 1.5 TR Window/Split type AC. (Note -Cost of refrigerant will be measuered and paid separately )

S & F in repair condenser coil as per sample for 1.5 Ton A.C. Note : Charging of refrigerant including cost of refrigerant will be measured and paid separately under respective item.

S & F in replacement relay suitable for split type AC / window type AC upto capacity of 1.5TR.

S & F in replacement over load protector suitable for split type AC of 1.5 Ton.

S & F in replacement for air conditioners, capacitor 36 / 45 / 50 +6 mfd +/- 5% ,440 V AC .

S & F in replacement thermostatic switch suitable for 1.5 AC make Renutrol.

S & F in repalcement fan motor with blade as per size and sample suitable for FCU unit of Split type AC of capacity 1.5 Ton of make LG/Voltas/Blue Star complete all as specified and directed.

S & F in repalcement blower fan motor for indoor unit of Split type AC of capacity 1.5 Ton of make LG/Voltas/Blue Star complete all as specified and directed.

S & F in repalcement fan motor with blade for Window type AC of capacity 1.5 Ton of make LG/Voltas complete all as specified and directed.

M & L for gas charging in split type AC unit 1.5 TR capacity using refrigerant as per standard practice after flushing, vacuuming including detecting leakage, rectification leakage, commissioning and testing complete in all respect.

Ditto but for window type AC unit of capacity 1.5 TR capacity .

S & F in repair power PCB as per sample suitable for 1.5 TR Split type AC, making connection & testing complete all as specified.

S & F in repair copper connection pipe with union at both ends and with insulation, between FCU unit and indoor unit of length twelve feet for 1.5/2 TR Split type AC, making connection & testing complete all as specified.

S & F in repair drain hose pipe suitable for 1.5 / 2 TR split type AC.

S & F in repair air filter as per existing size suitable indoor unit of 1.5 TR split type AC.

M & L for complete servicing of Air conditioner window/split type including cleaning of colling coil and condenser by caustic soda solution including removal of dust by using blower/brush to external fins and from beneath assets, cleaning of base tray properly including oil to fan & condenser motor, tightening of all electrical connections with proper alignment including fitments in their locations and repairs of suction & discharge tubes complete in all respects. (Note :-Filling of refrigerant if required or parts to be replaced will be measured and paid separately under respective items)

Repair of voltage stabilizer of capacity 5 KVA/4KVA by carying out rewinding of main transformer, replacement of volt meter, relay, timer and IC circuit as required and making functional and testing complete all as specified and directed .

Supply and fixing in replacement heating element of 1.5 KW /2.0 any type , as per sample ISI marked.

Supply & replace complete siphon assembly as per existing sample including rubber washer and nuts & bolts suitable for water heater of capacity 25 Ltrs of any make.

S & F in replacement SS inner tank as per size and sample for geyser of capacity 25 ltrs.

Supply and fixing in replacement thermo state switch suitable for above geyser ISI marked.

Supply and fixing in replacement PVC pipe pipes of 450 mm long best quality, heavy duty for geyser of 15 mm dia with brass connecting nuts/couples.

S & F in replacement stop cocks brass CP 15 mm dia suitable for above geyser ISI Marked.

Supply and fixing in replacement PVC insulated copper conductor cable 3 core 6 Sq mm 660/1100 volts grade

Supply and fixing in replacement of plug top 3 pin 15 Amps.

Supply and fixing in replacement indicator lamps red and green colour 230 volts 50 Hz AC supply.

Supply and fixing in replacement safety valve to blow of at high rated temperature having latest ISI marked.

Supply and fixing in replacement glass wool around the geyser.

Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sq mm to 50 Sq mm 3.5 core/4 Core. Note-Excavation and earth work will be measured and paid seperately under relevant item. )

All as per item No. 102 above but size 120 Sqmm 3.5 core to 150 Sq mm 3.5 core.

Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 10 Sqmm 4 core.

All as per item above but size 16 sq mm 4 core.

All as per item above but size 25 sq mm 4 core.

All as per item above but size 50 sq mm 3.5 core.

All as per item above but size 120 Sq mm 3.5 core.

All as per item above but size 150 Sq mm 3.5 core.

S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz, 630 Amps with breaking capacity 50 KA adjustable, theremal magnetic release type all as specified and directed.

S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz, 400 Amps with breaking capacity 36 KA adjustable, theremal magnetic release type all as specified and directed.

S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz, 250 Amps with breaking capacity 36 KA adjustable, theremal magnetic release type all as specified and directed.

S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz, 200 Amps with breaking capacity 36 KA adjustable, theremal magnetic release type all as specified and directed.

S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,125 Amps with breaking capacity 16 KA fixed, theremal magnetic release type all as specified and directed.

S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,100 Amps with breaking capacity 16 KA fixed, theremal magnetic release type all as specified and directed.

S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,63 Amps with breaking capacity 16 KA fixed, theremal magnetic release type all as specified and directed.

Taking down existing street light fitting/flood light/post top lantern of any type and make & capacity.

Supply and fix roadway luminaire LED light fittings of 60 watts and including necessary electric connection with 2.5 Sqmm twin core Copper conductor unarmoured cable, complete all as specified and directed.

All as per item No. 118 above but of 70 watts .

All as per item No. 118 above but of 90 watts .

All as per item No. 118 above but of 120 watts

Supply and fix LED Flood light 70 W IP 66 including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size .

All as per item No. 122 above but of 120 watts

All as per item No. 122 above but of 210 watts

Supply and fix LED post top lantern 20 W made in cast aluminium spigot housing with decorative opel polycarbonate diffuser and IP 65 protection including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

All as per item No. 125 above but of 40 watts

S & F bracket made with GI tube light grade (not less than 1.2 RM) in length of 32 mm bore size and fixed to the LT pole with the help of two Nos FI Clamps of size 50X6 mm nut bolt and washers,complete all as specified and directed

Supply and fix in replacement FRP , hot press moulded SMC pole box 295X255X120 mm comprising of 100 Ams aluminium bus bar 4 strips ( IP 55 protection ) with one MCB SP 6 Ams to be fixed inside the box and box will be clamped bottom of the pole with FI clamps (duly painted ) nut bolt washers of required size.Make - SINTEX ,Model GSJB-2520 or any other sample approved by GE.

Preparation of old painted steel surface and painting of steel tubular pole upto 09 RM long applying two coats of aluminium paint on complete poles including cross arms and writing of numbers on pole with black paint in 40 mm font size of letters including surface dressing all around the poles approximetely 01 Sq Mtr area complete all as specified and directed .

Preparation of old painted steel surface and painting of LT panel board / feeder pillar box including scratching the existing burnt and rusted paint and applying newly two coats of synthetic enamelled paint to match the existing upto smooth surface of panels complete all as specified and directed by Engr-in-Charge.

S & F in repair on load changeover switch with sheet steel enclosure, I-O-II 3 phase & neutral,415 V, 50 Hz, 400 A complete all as specified and directed. Make HPL / Havells.

S & F in repair on load changeover switch with sheet steel enclosure,I-O-II 3 phase & neutral,415 V, 50 Hz, 250 A complete all as specified and directed. Make HPL / Havells.

S & F in repair on load changeover switch with sheet steel enclosure,I-O-II 3 phase & neutral,415 V, 50 Hz, 200 A complete all as specified and directed. Make HPL / Havells.

S & F in repair on load changeover switch with sheet steel enclosure,I-O-II 3 phase & neutral,415 V, 50 Hz, 100 A complete all as specified and directed. Make HPL / Havells.

Taking down the existing defective HT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 95 to 120 Sqmm 3 core 11000 Volt grade. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )

Supply & Laying in pipes/ ducts/ poles/ trenches/ under floor/ under road XLPE insulated cable screened PVC bedded galvanised steel strip armoured,electric power cable heavy duty with aluminium conductor,11000 Volt grade (Earthed) cross section area 95 Sqmm, 3 core complete all as specified and directed. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )

All as per item No. 136 above but size 120 Sq mm 3 core.

M&L for cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size for 95 sqmm complete all as specified and directed.

Same as item No 138 above but of size upto 120 Sqmm, complete all as specified and directed.

M&L for cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size for 95 sqmm complete all as specified and directed.

Same as item No 140 but of size upto 120 Sqmm, complete all as specified and directed.

M&L for cable jointing kit for 11 KV earthed grade cable straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size upto 95 Sqmm complete all as specified and directed.

Same as item No 142 but of size upto 120 Sqmm, complete all as specified and directed.

Servicing / Calibration to 11KV HT VCB/RMU panel complete including the following (a) Taking out 11KV HT VCB of 630 Amps rating trolley from HT Panel after switching off electric supply.Checking of mechanical system for proper functioning of upward/downward movement of HT VCB trolley including replacing closing buffer, triping buffer (VMX type), VI connection gap check, motor coil resistance check, closing coil resistance check, spring charging cut off switch check, aux switch check, NO-NC states check, trip coil resistance check, testing details, timing test, oil value test, breaker timing test, connector resistance test, IR value test, HV test, mechanical and electrical mechanism check, counter reading check, shock observer check, pre close/ post close circuit check, test and service position limit switch check, breaker drive screw operation check, trip coil assemble operation check, mechanical latch . Cleaning & servicing the fixed/ moving contact & blowing out dust and applying the proper lubrication/ greasing and reassembling the VCB including connection to HT panel complete to be replaced where reqd all as directed by EIC. Note:- (1) Maitenance of all HT VCB will be carried out as per maintenance schedule (2) Testing of above job to be carried out by engineers of authorised dealer/service centre. (3) Replacing new items shall be measured and paid separately as supply only.

Supply only shunt closing/tripping coil operated on 110 /30 volt system suitable for working of relay of HT SF6 / VCB complete all as specified and directed.

Supply and fixing in repairs spring charging motor suitable for fixing with 11 KV indoor type VCB panels complete all as specified and directed. Make - MICO/ABB/C&S/L&T.

Supply and fixing in repairs digital earth fault and over current relay suitable for fixing with 11 KV indoor type VCB panels make crompton complete all as specified and directed.

Supply and fixing in repairs vacuum interrupter suitable for 11 KV VCB trolly complete all as specified and directed.

Supply and fixing in repairs moving contacts of VCB made of copper and suitable for 11 KV VCB Trolley compete all as specified and directed.

Supply only meter devices 3 phase digital type Amp meter 0- 120 Amp class 0.5 of size 96 mmx96 mm to match the ratio of existing CTs. Make: Conzerve Cat No DM 3258 or equivalent model of IMP/AE Bombay/Meco.

Supply only meter devices 3 phase digital type Volt Meter 0- 12 KV class 0.5 of size 96mm x 96 mm to match the ratio of existing CTs. Make conzerve Cat No DM 3256 or equivalent model of IMP/AE Bombay/Meco.

M&L for replacement of phase indication light LED type for LT/HT panels in three colours (R,Y,B) complete all as specified and dirtected.

Repair / Servicing / maintenance of transformer 11 / .433 KV indoor / outdoor type , plinth / pole mounted type including the following work services :- (a) Disconnecting transformer from electric system and providing electric power to user from alternative arrangement including taking out from existing position . (b) Decanning of transformer oil , opening top cover , disconnecting of all internal connections , lifting and taking out of core assemble , LT / HT bushes, Tap changer etc ,cleaning and inspection of core and winding , segrigetion of serviceable and unserviceable items , removing of sludge and cleaning tank and cooling pipes / fins /tanks with pressure water and drying the tank complete. (c) Replacinig unserviceable LT / HT bushing by replacing rubber / cork oil seals and damage terminal rod & replacement of Transformer cover gasket of rubber cork sheet.(d) Re installation of TFR including reassembling of core / winding assebly complete including replacement of unsv parts , repair the defective parts and tighting of all loose / sparks wire / nut bolts etc and refixing the to the existing position , connecting with HT/LT cables and earthing strip and testing complete including necessary Transportation ( If required ) to the work shop and back and including Dehyderation and refilling of existing or new transformer oil of required quantity . NOTE FOR ITEM NO 153 :- (i) Dehydration of oil and new Transformer oil shall be measured seperately . (ii) Transportation of TFR measured and paid seperately . (iii) HT & LT Busing , Tap Changer will be measured & Paid separataly. (iv) In case HV / LV Winding found damages then Contactor shall be made serviceable with new winding and the same will be measured and paid seperately. (v) The rate of cork sheet & Packing Material for following cap of TFR are included in coated rate of transformer capacity 125 to 150 KVA .

Supply only for incorporated to the repair of transformer HT bushing porcelain with copper stud, nuts, bolts, washers, gasket, oil seal suitable for Indoor typeTransformer of capacity 125 to 150 KVA .

Supply only for incorporated to the repair of transformer LT bushing porcelain with copper stud, nuts, bolts, washers, gasket, oil seal suitable outdoor / Indoor typeTransformer of capacity 125 to 150 KVA .

Supply only for incorporated to the repair of transformer Off load Tap changer switch of existing model / type of Transformer of capacity 100 to 160 KVA .

Replacement of silica gel breather assembly including silica gel of transformer 11/0.433 KV of capacity 150 KVA complete all as specified and directed.

M&L for painting of transformer capacity upto 150 KVA with two coats with synthetic enamel paint with spray gun over a coat of red oxide primer including filling putty in cavaties at site complete incl surface preparation complete all as specified and directed.

M&L for Dehydration of transformers oil minimum three cycles to achieve dielectric strength up to 50 KV in 2.5 mm gap electrode including toping up of Transformer oil if required at site . Note: (i) Dehydration of transformer oil shall be carried out at site and contractor shall take the testing result before and after dehydration of oil and show to the EIC at site and maintain necessary documents for record . (ii) Dehydration Machine with all T&P & Transformer oil testing machine for dehydration of Transformer oil and necessary transportation for the machines shall be arrange by contractor . (iii) Oil required for topping up of transformer will be measured & paid separatly.

Supply and topup of transformer oil EHV as per IS 335 of 1993 Part II with dielectric strength up to 50 KV in 2.5 mm gap electrode complete and including necessary transportation complete all as specified and as directed.

M & L for rewinding of transformer HV coil with super enamelled / paper coated copper wire of existing gauge including all associated insulating material such as separator etc complete varnishing, heating including dismantling of top cover, decanting transformer oil, storing the same in suitable container,disconnection live part, dismantling of bushing, lifting of core Assey, checking the windings, cleaning of cooling tube, conservator and all internal connection after all necessary repair work and rewinding, assemble the complete transformer and refilling after necessary filtration including all internal connection etc of any type / capacity transformer. Note : Filtration of oil, insulator, spindle and gasket etc shall be measured and paid separately.

M & L for rewinding of transformer LV coil with super enamelled / paper coated copper wire of existing gauge including all associated insulating material such as separator etc complete varnishing, heating including dismantling of top cover, decanting transformer oil, storing the same in suitable container, disconnection of live part, dismantling of bushing, lifting of core Assey, checking the windings, cleaning of cooling tube, conservator and all internal connection after all necessary repair work and rewinding, assemble the complete transformer and refilling after necessary filtration including all internal connection etc of any type / capacity transformer. Note : Filtration of oil, insulator, spindle and gasket etc shall be measured and paid separately.

M&L for maintenance of 2 pole/4pole structure and taking out all old connection/jumpers and fixing fresh jumpers with proper lugs nut/bolts and tightening all incoming and outgoing connection, properly winging with conductor including servicing/greasing of existing GODs and testing for smooth operation and proper alingment of contacts including replacement of any part of fixed/moving contact complete all as specified and directed.

M&L painting of two pole structure of 11m steel poles with cross arms, bracings, clamps of any length and shape for HT power supply upto 11 KV with two coat of aluminium paint including preparation of the existing surface including marking pole numbers in a 15cm dia yellow circle & marking three black & two yellow bands width 30cm by fluorescent paint,from bottom of pole above coping to 1.5 mtr height,complete all as specified and directed.

Supply and fixing in replacement of lightning arrestor suitable for 11 KV grade,expulsion type, complete with all fitting transmission class for outdoor discharge capacity 65KA, complete all as specified and directed.

M&L danger notice plate for HT 25 x 20cm x 1.5mm thick mild steel sheet,vitreous enameled white with letters,figures and conventional skull and bones in signal red colour and fixed with MS clamps,bolts and nuts, complete all as specified and directed.

M & L cleaning of area around two pole structure sub station, power house, pump house U/G sump area by surface excavation not exceeding 30 cm, averaging 15 cm deep and getting out removing shrubs, grass miniplants and other unwanted material, stones etc leveling complete all as directed. Note:- (i) The contractor shall use own T&P as required at site including safety measures.

Excavation in trenches n.exc. 1.5 m deep and n.exc.1.5 m wide in any type of soil and forming bottom surfaces for laying of cable complete all as specified and directed.

Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected. Note: Punned thickness shall be measured for payment.

Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.

Returning filling in including spreading leveling watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

Removal surplus soil at a distance n. exc. 50 m and deposited where diredted at a lavel not exc. 1.50 m above the starting pont complete all as specified and directed.

Boring, holes for inserting of 50/80 mm bore GI pope under the road/hard standing or any other location not less than 1200 mm deeep complete all as specified and ditected.

M & L GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L GI pipe 50 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L GI pipe 80 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M&O for periodical maintenance / servicing of DG set consisting of normal repairs such as tightening of nut bolts, greasing, checking of lube oil level , fuel tank, fuel pipes, water / coolent level in radiator,cleanness of air filter, condition of hose ,V belts , battery connections / checking of battery terminals , level of distilled water in battery and checking of all other visual parts of DG set including routine cleaning of dust with vacuum cleaner etc ( once a week or as required and directed by Engr-in-Charge / JE.) (a ) For DG Set 180 KVA, Make;- Ashok Leyland (i) The maintenance cost of DG Set for month shall deemed to comprises of cost of labour employed for the purpose, T&P used and other petty items such as cotton waste, Kerosene oil, Grease, nuts, bolts etc. (ii) M & L for replacement of spares parts and oil will be measured and paid under respective items of this BOQ.

Supply and fix in repair following spare parts mentioned under item No. 179 to 200) for DG set 180 KVA.

Diesel Filter ( fuel filter)

Mobile filter (lube oil filter)

Air filter (primery & safety element) including air cleaner hose with T bolt and clamp.

Piston assembly.

Set of Piston ring.

Valve seat Intake.

Valve seat Exhaust.

Valve insert.

Valve Guide stem.

Injector cup

Connector female.

Bearing connecting rod.

CR bush.

Upper gasket kit

Lower gasket kit

V Belt for fan drive.

Starter ring

Fuel pipe with copper washer and banjo bolt ( fuel tank to fuel filter)

Oil pipe with copper washer and banjo bolt

Drain cock with adoptor.

Lube oil pressure sendor ( sensor + switch)

Water line hose kit

M/L for cleaning the fuel tank both internally and externally by removing all the dust / sediments etc including replacement of fuel tank lid by new one for DG set of capacity 180 KVA , Make Ashok Leyland

Taking down the defective water pump from DG set of any type and capacity and replace with new one for DG set of capacity 180 KVA , Make Ashok Leyland all as directed .

M&L for Repair to Radiator assy by disconnecting the radiator from engine frame and servicing/cleaning with acid and brazing where required to stop leaking tubes/joints etc. cleaning fins and re-fixing the same for DG set of capacity 180 KVA , Make Ashok Leyland all as directed.

Supplying and filling coolant as recommended by manufacturer in DG sets.

Supply in sump / topping up engine oil, multi grade 20w /40 in engine or replacement of engine oil for DG SETS .Make: Indian oil / Hindustan petroleum / Castrol.

Dismantling and taking out all burnt windings from Armature, Main field, stator field and armature complete assembly fitted in 180 KVA DG Sets and M& L for rewinding of alternator with super enameled copper wire of existing gauge size and turns and makers specifications including all associated insulating material such as separator and heat varnishing etc including both inner and outer bearing of existing size and model, after complete repair of alternator re-assembling and refixing the same in position including testing complete all as specified and directed.

Supply and fix in replacement battery of capacity 150 Ah , 12 V suitable for DG sets

Supply and filling distilled water in battery .

M&L for replacement of brass battery terminal suitable for lead acid battery 12 V of any AH .

M &L for Removing the fuel injection pump (FIP) from DG set cap180 KVA Make Ashok Leyland and carry out servicing and calibration from authorised maker's work shop including replacement of injectors, nozzles, etc. and refitting the same for smooth and efficient functioning all as directed. Note :-Repairs will be carried out from authorised workshop of MICO or manufacturer of DG set.

Taking down defective self starter and supply and fix in replacement self starter for 180KVA DG set of Kirloskar make.

Supply and fix in replacement AVR ( automatic voltage regulator ) for DG sets 180 KVA complete all as specified and directed.

Supply and fixing in replacement DG set controller in control panel of DG Set 180 KVA, Make Ashok Leyland , duly programmed by manufacturer ,testing and comissioning complete all as specified and directed.

M&L for replacement of power contactor 4 pole ,415 volts, 400 amps coil operating voltage 230 Volt AC, Make-INDOASIAN / L & T model MCX-43 or equivalent as in PS.

Supplying and laying synthetic rubber insulated mats 2.5 mm thick for voltage upto 11 KV for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m.

Supply installation testing and comissioning glow sign board in replacement made by emerged letters in red colour or as asked ( CDA PATNA ) of dimentions width X height of each letter not less than 4 feet X 2 feet fixed with LED light modules & SMPS adapter as per size and shape of required letter ,letters made with fiber acrylic sheet and both side of letters framed with alluminium coated panel of thickness not less than 3 mm fixed on metal frame made with MS hollow section square/rectengular, total length of sign board structure will be approx 6 mtr X 1.5 mtr . The base of sign board should be fixed with wall roof by using fasteners / FI clamps & PCC as reqired to bear wind load etc.& finally conected to power supply point complete all as secified and directed. ( Note - Rates quoted by the contractor shall be inclusive of :- 1(a). Transportation of sign board at site,all fixing arrengements welding work / PCC including form work and other civil work as required at site. 1(b). Provision of power supply connection from MCB DB to the site of installation of sign board. 2. MS iron structure to be made with MS hollow section square/rectengular and painting will be measured and paid separately under respective item of CA. 3. Contractor has to submit warrenty for at least two years for LED lights fixed in sign board and fiber acrelic sheet/material used in sign board.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240

M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and appiying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth wire 4 Sqmm as earthing leads by means of bolts, nuts, check nuts and washers properly jointed as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

M&L earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of 25X4 mm as earthing leads by means of bolts, nuts, check nuts and washers beside Welding / brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

Supply & Fix earth continuity conductor or main earthing lead fixed to wall on battten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situatioin for loop earthing etc. as required size 20 X 3 mm copper strip complete all as specified and ditected.

Same as item No 221 but size 25 X 4 mm GI strip .

Supply and fix in replacement sluice valve of 80 mm dia ISI marked with cast iron body bonnet wedge stuffing box galvanized thrust plate band plate wheel of gry cast iron ,operated with heigh tensil brass spindle, wedge body seal ring and wedge facing lead tin brass bolt and nut compressed fiber bolt pressured rating PN-1.6 confirmed to 14846 including material and labour for jointing flange joint with rubber / fiber jointing ring bolt nut and washers etc complete all as specified.Make Remco/ Kirlosker/BIR.

Supply and fix CI reflux ( non return ) valve 80 mm bore as per IS 5312 with GM working parts both ends flanged and suitabely machined and drilled for and including required nut , bolts washer rubber/ fiber packing complete all as specified and directed. Make Remco/ Kirlosker.

Excavation in tranches n.exc. 1.5 m deep and n.exc.1.5 m wide in any type of soil and forming bottom surfaces to required level of slope for laying of pipes complete all as specified and directed.

Taking up GI steel water tubing 15 mm bore from the tranches by necessary excavation or on wall / laid under floor/ ceilings with complete fittings,any grade complete all as specified and directed. ( Note:- excavation and earth work shall be measured and paid separately.)

All as per item No 226 above but 20 mm bore

All as per item No 226 above but 25 mm bore

All as per item No 226 above but 40mm bore

All as per item No 226 above but 50mm bore

All as per item No 226above but 80mm bore

Supplying and laying steel water tubing 15 mm bore medium grade galvanised with all fittings like bend, tees socketes union etc. as required laid in trenches/ or on wall / laid under floor/ ceilings complete all as specified and directed.

All as per item No 232 above but 20 mm bore

All as per item No 232 above but 25 mm bore

All as per item No 232 above but 40mm bore

All as per item No 232 above but 50mm bore

All as per item No 232 above but 80mm bore

Supply and fix in replacement gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipes suitable for 20 mm bore dia of pipe complete all as specified and directed.

All as per item No 238 above but 25 mm bore

All as per item No 238 above but 40mm bore

All as per item No 238 above but 50mm bore

M & L straight plain brass ferrules ( or connnecting screws ) screwed both ends and fixed for the 20 mm bore diameter of pipe complete all as specified and directed.

All as per item No 242 above but 25 mm bore of pipe.

S & F chromium plated fancy type bib taps,cast copper alloy with crutch or butterfly handel,screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore dia of pipe complete all as specified and directed.

Dismantling and taking out complete assy of 7.5 HP ;capacity make Kirloskar submersible pump from bore well keep aside for repairing/assembling by replacemenrt of parts all as specified and directed.(Parts to be measured and paid spearately).

Dismenteling of complete bowl assy of 4 stage ,replacement of impellers GM , impeller rings,bearing sleeve ,ruber bushes ,neck rings ,distance bushes, thrust screws,center guid rings, connection pieces etc as per matching size and sample and requirement of pump complete all as specified and directed.

Dismantling of mortor taking out rotor complete and carrying out rewinding to starter by using supper quality of copper conductor of matching size in guage and weight using best quality of insulation material taping varnishing drying backing complete all as specified and directed.

Assembling fitment with the pump and making fit for lowering with necessary connection with starter / panel with testing complete all as specified.

Supply and lowering / fixing MS coloumn pipe 80mm bore flange type and 7.1 mm thickness ERW steel pipe including jolinting material i.e. rubber packing nuts, / bolts washers etc.

M & L for painting of valve pit cover of MS sheet of size n exc 0.90 X 0.90 M with two coat of blue synthetic enameled paint internally & externally including prepration of surface complete all as specified and directed at site.

Supply , installation / lowering and commissioning the submersible pump set with strove lined non return valve directly coupled with and including induction motor of 7.5 HP capacity for operation on 415 Volts +/- 10% , three phase , 50 Hz,copper wound & pump having 4 stage complete with necessary accessories specified by manufacturer , suitable for 1200 LPM discharge of water at 48 meter head all as specified and directed. Make-Kirlosker/ KSB / CRI /Crompton . (Note :- rates for lowering of pump & column pipe of size 80 mm bore flanged type & M&L for new jointing material i.e. rubber packing ,nuts , bolts and washer etc.will be measured and paid separately under respective item of schedule)

Supply & fix in replacement fully automatic star delta stater for submersible pump comprising with over load relay , amp meter, volt meter suitable for 7.5 HP capacity Kirlosker/CG make submersible pump complete all as specified and drected.Make Havells / L&T

Cleaning of OHT having capacity upto ten thousand gallons by removing deposited sand,mud,silt and taking out from the tank ,Flushing out the mud water by scraping out deposited mud on surfaces insied by using steel brush complete specified and directed & Putting adequate quantites lime mixed water and removing the same through wash out followed by poring bleaching solution all around the bottom of the tank complete all as directed at site.

Supply, connecting and testing (in replacement or for extention) of PVC insulated and sheathed water proof cable wih standard copper conductor flat submersible cable 1100 V grade complete all as specified for cross section area of 6 Sqmm 3 core.

Preventive and Periodical maintenance of passenger lift of OMEX make 02 (Two) nos. 13 passengers lifts in reliable, safe and efficient operating condition by regularly examine, lubricating and adjust the equipment and carry out planned maintenance in a systematic and controlled manner using techniques and expertise for components such as machine, worm gear, thrust bearing, drive sleeve bearing, break contact, linings and components , motor winding, rotating elements, bearing, coils resistance for operating motor circuits, magnet frames and other mechanical parts, controller, leveling devices, relays, Solid state components eg. PCBs, transducers, resisters/ contacts, leads mechanical and electrical driving equipment, governor, governor sleeve, shaft assembly, bearing/contacts and governor jaws, car and hall mechanical buttons, car and hall position indicators, hall lanterns, car direction indicators and all other car and landing signal fixtures deflector, car and counterweight guide rails and buffers, top and bottom limit switches, governor tension sleeve assembly, car counterweight and counterweight guide shoes including rollers or gib interlocks on hoistway door hanger, guides, automatic power operated door operator, car door hanger, car door contact, safety shoe, load weighing equipment, car frame, car safety mechanism and platform, battery operated emergency light and alarm system wiring of all equipment & accessories, vibration material, reverse phase relay, indicator and digital group indicator panel with microprocessor including cleaning of lift cabin's wall surfaces by using sand ballesting emery paper including polishing complete for under mentioned, lifts excluding cost of materials but including labour replacement and re-fixing of items.

Supply only Lift operational pulley of size 600 dia 13 mm 5 guru complete all as specified and directed

Supply only control panel including necessary wiring, ready to istall in all respect testing and commissioning complete all as specified and directed

Supply only Automatic Rescue Device complete panel and battery complete prewired ready to istall complete all as specified and directed

Microprocessor card

Supply only single phase preventer complete all as specified and directed.

Induction card

Supply only push button complete all as specified and directed.

Supply only gate lock complete set complete all as specified and directed.

Supply only gate lock fix contact complete all as specified and directed.

Supply only gate lock moving contact complete all as specified and directed.

Supply only reed switches complete all as specified and directed.

Supply only Air Cod complete all as specified and directed.

Supply only door shoe complete all as specified and directed.

Supply only door hanger roller complete all as specified and directed.

Supply only door sensor complete all as specified and directed.

Supply only door drive complete all as specified and directed.

Supply only rectifier card complete all as specified and directed.

Supply only brake liner complete all as specicfied.and directed.

Supply only anti vibration pad complete set all as specicfied.and directed.

Supply only car guided shoe complete all as specicfied.and directed.

Supply only steel wire rope 13mm dia complete all as specicfied.and directed.

Supply only travelling cable complete all as specified and directed.

Periodical maintenance and servicing of Engine, gear box, power steering alongwith cleaning , greasing & reinstallation including removal / replacement of following items / spare parts for vehicle TATA Xenon model 2016 :-

Gasket (oil sump)

Metal O seal plus premi gasket maker 85G

Oil filter head

Compact oil cooler (08 plate)

Hose ( pipe to intercooler)

Hose ( intercooler to pipe)

TMGO Gear oil 80W90

R/S seal kit with TAS 15 seal

Complete removal of rear propeller shaft from the vehicle and carried out servicing, repairing and greasing of propeller shaft alongwith repair/ replacement of following spare parts for vehicle TATA Xenon model 2016 :-

Assy prop shaft rear for SC/SPC/CC 31WB

Complete removal of gear lever from the vehicle and carried out servicing, repairing and greasing alongwith repair/ replacement of following spare parts for vehicle TATA Xenon model 2016 :-

Kit pad joint BS 3/4

Kit lined shoe BS-1/2/3/4

Bush ball seat

Rubber bellow

Linkage bush kit

Rubber bellow (at tunnel) sprint bucket

Replacement of miscelleneous accessories of the vehicle with the new one for vehicle TATA Xenon model 2016 :

Horn high tone W/RIS capacitor

Assy latch rear door LH manual with door

Assy latch rear door RH manual with door

Assy outer handle rear door LH

Assy outer handle rear door RH

Assy wiper arm and blade CO.DR.RHD

Assy wiper arm and blade .DR.RHD

Assy lock kit RHD collapsable STG

Complete removal servicing, greasing including replacement of important parts of disc braking system of the vehicle complete for vehicle TATA Xenon model 2016 :-

Brake disc

Hub FR W/O BRG & BR disc

Tapper roller BRG LM48548 BS12/3/4

Oil seal

Grease

Tapper roller BRG 30205 BS1/2/3/4

Complete servicing, greasing of Axle shaft bearing alongwith repair/replacement of important spare parts and certain miscelleneous parts of the vehicles for vehicle TATA Xenon model 2016 :-

Kit-Axle shaft bearing BS1/3/4

Wheel cyl assy dia 25.4

Assy EGR Valve 4SPTC BSII spacio gold

Material and labour of miscelleneous spare parts of the vehicle with the new one for vehicle TATA Xenon model 2016 :-

Turbocharger

Assy Fuel filter

Kit fuel pre- filter element

Assy oil filter (pin on)

TMGO diesel engine oilCI4 plus 15W40

Primary element air filter BS3/4

Assy front fog lamp LHS

Assy front fog lamp RHS

Supply and fix Tyre suitable for TATA Xenon ,of size 235/70 R-16

M&L for seat cover of best quality rexign for rear and front seats of TATA YODHA /TATA Xenon complete all as directed and specified.

Material and labour for removal/replacement of miscelleneous spare parts of the vehicle EICHER 10.75 ( Model - 2011,2016) :-

Oil seal, FR hub wheel

Air filter set E2 plus

Filter assy liquid spin

By pass filter

Element Kit oil filter

Front chassis harness

Rear chassis harness

Alternator 75A,12V LCB AB

Radiator assembly

Pully water pump

V Belt for fan

Brake drum

Nozzle holder assy

Washe internal

Filter set E483

Air filter set E483

Cotton

Periodical maintenance and servicing of wheel hub system of the vehicle alongwith cleaning ,greasing & reinstallatiion including removal/replacement of following items of vehicle EICHER 10.75 ( Model - 2011,2016):-

Hub front wheel (1070AB)

Oil sea, hub rear outer wheel

Oil sea, hub rear outer wheel (MCV)

Complete removal of propellor shaft from the vehicle and carried out servicing, repairing and greasing of gear bush ,lock assy, UJ kit, bearings ,etc alongwith repair / replacement of the following spare parts of vehicle EICHER 10.75 ( Model-2011,2016):-

Monotrn Prop Shaft MSL 1480

Auto slack Adjuster Offset 16mm

Gasket rear axle shaft (LCV)

Pin split 5.0X50.0

Fuel strainer (MAV COWL)

Oil seal hub front wheel (7488)

Oil seal hub inner wheel (7490)

Oil seal outer

Gasket RA shaft

Split pin 5X45

Periodical maintenance of vehicle Eicher by using / replacement of following items used for transmission,lubricating system.

Eicher life Max grease

Eicher life Max Engine oil gr 209

Eicher life Max transmission oil.

Eicher life Max diffrential oil.

Complete removal of clutch assembly from the vehicle and carried out servicing, repairing and greasing alongwith repair/ replacement of the following spare parts of vehicle EICHER 10.75 ( Model - 2011,2016) :-

Cover assy clutch

Clutch Disc dia 310

CMC dia 22.22 kit push rod.

Clutch buster 3 SORL.

Clutch release bearing assy

Lining Kit (2nd oversize)

Periodical servicing of Diesel Engine of the vehicle and carried out servicing, repairing,cleaning and greasing of connected parts alongwith repair/replacement of following spare parts of vehicle EICHER 10.75 ( Model - 2011,2016):- :

Sub assy Eng MTG FR MCV

Assy Eng MTG FR MCV

Gasket, rocker cover

Hose engine breathe (L 604)

Oil pump Asy

Turbocharger

Opening of Door trim (both side) , removing the both glasses and replacement of following old rusted defective parts of RHS & LHS doors EICHER 10.75 ( Model of 2011,2016) and re-installing after repair / replacement of unserviceable parts complete .

Door glass movement machine RHS/LHS

Front RHS/LHS door mechanism assy. with lock & Key

Rear view mirrror RH

Rear view mirrror LH

Replacement of miscelleneous accessories of the vehicle with the new one for vehicle Eicher model 2011 & 2016 :

Head lamp, brake and parking bulb set

Head lamp Realy with wireloom

Assy fog lights LH / RH

Wiper arms with rubber blade

Mud flap

Stearing cover

Labour for removing , cleaning and refixing of Diesel tank assembly of Eicher 10.75 complete all as specified and directed.

S & F diesel tank Lock

S & F in replaacement Carpet mat suitable for Vehicle EICHER 10.75

Repair of seat complete including replacement of best quality Rexign, U foam & spring complete all as directed.for Eicher 10.75

Denting and painting of vehicle, including welding wherever required.for Eicher 10.75.

Supply and fixing in replacement of maintenance free battery 12 volt 80 Ah including battery leads and initial charging of battery. Make:- Exide/ Amron.

Supply and fix Tyre suitable for Eicher 10.75,of size 750-16

Labor for servicing the veh MC model 2004,2009,2021 Make Hero / Bajaj with replacement of following new parts for making vehicle for smooth functioning :-

Ignition Key assy

Spark Plug

Switch assy

Brush set for starter motor

Indicator Assy LH/RH

Head light Lamp

Side view mirror LH / RH

Came chain guid

Counter shaft

Radial ball bearing

Gear shift spindle

Clutch outer

Clutch center

Oil pump Assy

Timming chain roller

Shocker

Throttle Cable

cllutch Cable

Carburattor assy

Oil pump sensor

Fuel Gauge

Air filter

Brake Shoe

Wheel com front

Wheel com rear

Side stand

Chain Sprocket kit

S & F in replaacement battery 12V suitable for motor cycle Hero/Bajaj Ptan Make Exide.

S & F Seat cover suitable for motor cycle.

S & F tyre suitable for motor cycle size 2.75- 18.

Supply and fixing of stickers for Command sign,Rafter number, unit name on front and back side and maintenance day. Note- Size and design will be as per direction of Engineer in charge.

Supply and fixing of PVC acrylic sheet duly stickered vehicle BA Number. Note- Size and design will be as per direction of Engineer in charge.

PAPPU ROY CONSTRUCTION (BID ID -3510112)

VAISHNAVI CONSTRUCTION (BID ID -3512386)