Miscellaneous civil works at Chhatrapati Shivaji Maharaj Park Dadar (W) in Beat No-191 in G/North Ward.

Removing mosaic China Chips & Granite

M-20 grade plain cement concrete

Removing & refixing interlocking concrete

Providing & Fixing 60 mm thick Pever Block

Providing, Fabricating, Erecting on site Facility Sign Boards (Taxi Stand/Police Station/Petrol Pump/Hospital and any other utilities)as per drawing no Facility Sign Drawing F1,Vertical poles shall be Hot dip galvanised pipe of 65 NB, 3mm Wall thickness

Raising/Lowering Rectangular Chamber

Excavation for foundation

Rubble Soling 150mm

Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250mm

Providing and fixing M. S. black pipes for columns 75 mm

Providing and fixing M. S. black pipes for columns 50 mm

Providing and installing Nylon net

Removing cement plaster

Removing old Doors

P/F FRP Door

Removing Existing AC Sheets

P/F GI Sheet

Brick work designation 3.5 and above in superstructure above plinth level upto floor five level in

P/L 1:3:6 Bedding

P/A Cement Plaster

Providing, laying 250 mm diameter S.W Pipes.

Random rubble masonry with hard stone in superstructure aboveplinth level , including leveling up with cement concrete 1:6:12 (1cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like.Cementmortar 1:6 (1 cement : 6 coarse sand)

Providing and applying first single coat of approved primer and two coats of anti-algal, anti-fungal, exterior paint asspecified below of an approved make and colour as per manufacturers specifications to any surface, upto 10m heightfrom ground level and at all locations as directed including preparing surfaces for painting by any approved means, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-roundS.W. pipes including bed concrete as per standard design :

Constructing brick masonry inspection chamber 90cm x 45cmx30cm

Providing & fixing RCC Cover With M. S. angled Frame chamber of 90 cm x 45 cm

Providing and fixing open half round Hume pipe channel 250 mm dia

Supplying and fixing 0.90m x 0.45m C.I Cover

18 mm thk. Black Granite for Gate Column

18 mm thk. Green Granite

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead.

Providing raised and cut pointing to any kind of stone masonry work at all heights and locations in cement mortar 1:2, including raking of joints upto the depth of 20mm, finishing, curing, cleaning the surface etc. complete as directed by Engineer In Charge.

Broken China mosaic

Providing and fixing of the precast TREE GUARD KERB of M-20 C.C. of height 230mm, width 100mm, Length 400mm, finished neatly, compacting, curing, formwork etc. including bedding of M-10 C.C. procured from B.M.C. approved R.M.C. plant,10cm.thick, filling of jointing in C.M. 1:2 and painting the exposed surface with 3 coats of road marking paint, Grade I of approved colours and quality including single coat of approved brand primer including excavation in C.C, asphalt etc. as specified and as directed.

Providing, detailing, and fabricating Ornamental Entrance Gates 60 to 65 kg/Sqm

Providing and applying synthetic enamel paint or flat oil paint in any requiered shade in 3 coats over a primercoat as per manufacturers specifications includingscrapping, cleaning the surface etc. Complete

Providing and applying first single coat of approved primer and two coats of waterproof cement paint

Providing and laying 25 to 30 mm thk. rough Shahbad stone

Providing and laying 25 to 30 mm thk. rough Kota stone

Providing Mild Steel litter bins with Powder Coating finish of size: 23.62” Dia x 31.49” Height and holding capacity of 50 Litres. The design of the litter bin will be executed as per drawing.

Dual side Street Name Board for Heritage Area: Providing, fabricating and erecting on site street name board. Vertical pole shall be of hot dip galvanized M.S. square pipe of size 100mm x 100mm x 3.5mm thick. Signage box shall be of size 1500mm x 600mm made of hot dip galvanized M.S. square pipe of size 50mm x 50mm x 2mm thick covered with 4mm thk, 0.5mm al skin thk aluminum compostie pabel on both sides as shown in drawing. The signage box assembly shall be welded to the vertical pole. The retro reflective sign board of size 1500mm x 600mm shall be made of Type XI standards as per IRC 67-2012 which shall be pasted on to 4mm thick ACP sheet on both sides that shall be riveted to the square box as shown in drawing.

Junction Name Board for Heritage Area: Providing, fixing and erecting on site Junction Name Board. Vertical pole shall be 2 nos of hot dip galvanized M.S. square pipe of size 100mm x 100mm x 3.5mm thick. Signage box shall be of size 1500mm x 900mm made of hot dip galvanized M.S. square pipe of size 75mm x 75mm x 6mm thick covered with 4mm thick aluminum composite panel with 0.5mm Al skin thickness on both sides.

MandatoryBoard(600mmDia)–Providing,Fabricating,ErectingonsiteMandatoryBoardsonto electrical pole.Signageshall beof size600mmdiaasper theapprovedstructural drawing.The boardshall bemadeof 3mmACPwithback support frame of Aluminium C section of size 33x33x33x2mm thick

Cautionary board with clamping (600 mm triangle) - Providing, Fabricating, Erecting on site Cautionary Boards onto electrical pole. Signage shall be of size 600mm triangle as per the approved structural drawing. The board shall be made of 3mm ACP with back support frame of Aluminum C section of size 33 x 33 x 33 x 2mm thick fixed using an Aluminum clamp of 3mm thick with suitable GI nut bolt onto the electrical pole. The board shall be pasted with MICRO PRISMATIC GRADE retro reflective base sheets conforming to type XI standards of I.R.C. 67 2012 CODE. Letters or borders shall be printed on the retro reflective sheeting using printer approved by the sheeting manufacturer and laminated using suitable UV protective laminate. The reflectivity of sheet shall gave warranty of 10 years. The reflection count shall not be less than 80% of its original reflection after 10 years. Complete as per the specification and directed by the engineer.

Providing, fabrication and fixing stainless benches

ALL BENCH - PAINTING

Removing & refixing wooden/concretebenches as directed.