Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC 17 1A BALLYGUNGE CIRCULAR ROAD KOLKATA 700 019 | KOLKATA | WEST BENGAL | 700019 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹38.8 L+₹1.0 L (2.78%)Rejected-Finance 72 A ABINASH CHANDRA BANERJEE LANE KOLKATA 700010 | KOLKATA | WEST BENGAL | 700010 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹38.9 L+₹1.2 L (3.07%)Rejected-Finance 7 11 1 BROJONATH LAHIRI BISHNUPUR SOUTH 24 PGS WEST BENGAL 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹39.1 L+₹1.4 L (3.67%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹39.2 L+₹1.5 L (3.86%)Rejected-Finance 186 B DIAMOND HARBOUR ROAD KOLKATA 700 060 | KOLKATA | WEST BENGAL | 700060 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹35.5 L
EMD Value
₹71,000
Closing Date
4 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
COMPREHENSIVE B/R AND E/M REPAIR TO WATER SUPPLY INSTALLATIONS INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2024_MES_642193_1
8221/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
GE (FW) Kolkata
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹71,000
21 Mar 2024
13 Feb 2024
5 Mar 2024
13 Feb 2024
4 Mar 2024
26 Feb 2024
Amount
SCHEDULE 'A' PART-I (B/R WORKS)
Demolition of Cement concrete ( unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of cement Concrete(reinforcement cut as required to facilitate demolition) Roof, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
M&L for pre polished coloured designer tiles 30cmx30cmx 10mm thick made with electro vibro technology with rubber/ PVC moulded set, jointed and pointed in neat cement slurry in floors with white cement & pigment over laid screed bed or bedding layer of mortar 15mm thick(1:4) for laying floor finishes and including with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.
M&L coloured non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) all as specified and directed.
M&L coloured glazed ceramic tiles in vertical surface 300X200X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:3) all as specified and directed.
Material & labour for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels over 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating etc complete all as specified and directed.
M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.
Material & labour for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate), as infoundation, filling and mass concrete and finished even & smooth complete all as specified & directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick any colour as approved, set, jointed and pointed in neat cement slurry in floors etc. set and jointed in neat cement slurry and pointed in grey cement and colour pigment cement to match over and including 15 mm thick screed bed in CM (1:6) all as specified and directed.
Material & labour for 20-25 mm thick machine cut kota stone slab 550mmx550mm/600mmx600mm laid in floors, slabs and steps etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbing and polishing over and including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed. Note - Kota stone for step shall be in single piece complete all as specified and directed.
All as per item No.14 above but in riser of steps, skirting, dado and pillar with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. Note - Kota stone for risers of step shall be in single piece.
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.
S&F 20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 20mm screed bed in CM(1:6) completed all as directed.
S&F 20 mm thick granite slab as in vertical surfaces cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 10mm rendering in CM(1:3) completed all as directed.
S&F machine made precast cement concrete blocks (interlocking paves) of 60mm thick with 6mm top layers of colour rubbrised ante abrasive material laid over sand cushion . The interlocking joints shall be filled with fine sand complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation all as directed .
M&L for pre polished coloured chequered cement concrete tiles 30cmx30cmx 10mm thick made with electro vibro technology with rubber/ PVC moulded set, jointed and pointed in neat cement slurry in floors with white cement & pigment over laid screed bed or bedding layer of mortar 15mm thick(1:4) for laying floor finishes and including with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.
M&L for 600mmX600mmX16-20mm thick high traffic paver tiles (coloured) joint free as in floor of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 20mm thick screed bed in CM(1:6) including dismantling old tiles of any description complete all as specified and as directed.
M & L, RCC Type B1 1:1.5:3 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and Chajjas and in shelves and the like all as directed.
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .(Upto 4th story bldg)
M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hooking's ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete all as specified and as directed.
S&F in repairs stainless steel round grating 150mm dia complete all as specified and directed by Engr-in-Charge.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks with and including demolition of brickwork built in cement mortar complete all as specified and directed .
M&L rendering 15 mm thick in CM 1:4 including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/ concrete/ stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed by Engr-in-Charge. Note :- WPC will be measured and paid separately
M&L rendering 15 mm thick in CM 1:6 including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/ concrete/ stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed by Engr-in-Charge. Note :- WPC will be measured and paid separately
Supply only Liquid water proofing compound make as approved
M&L rendering 10 mm thick in CM 1:3 on concrete as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement with and including taking down cement or lime plaster of any description complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash on old decorated surface complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including neonatal or similar roof coverings complete all as specified and directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge, eaves boards, hips, velly gutter drip and straight flushing of required machine moulded shape and size complete all as specified and directed .
S&F Rolled Mild steel Fe 410 -W (Gde- E- 250) quality- A sections as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)
S&F Rolled Mild steel Fe 410 -W (Gde- E- 250) quality- A sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.
S &F framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barried iron doors ladders framed balusters, walk ways, railing framedwork of water tanks and similar work conforming to Fe.290 Gde E-165 complete all as specified and directed.
M&L for preparing new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome primer complete all as specified and directed .
M&L for cleaning of roofs by getting out growing vegetation's / grass & booming down with removing it out of MD land premises of including repairing to damaged surface of roof by applying two coats of tartaric acid over two coats of CM (1:3) with mixed with 3% WPC & sealed with 85/25 hot blown grade bitumen complete in patch not exceeding 2.0 Sam each including necessary scaffolding, complete all as directed.
M&L for repairing of damaged portion of mouth at tarrace / roof surface of rain water pipe by cleaning and repairing to mouth of rain water pipe (RWP) by using CM (1:3) with mix with liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof, complete all as directed.
M& L for repairs to chajja area exc 1 Sqm and n exc 2 Sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM (1:3) or PCC (1:2:4) type B-0 (using 12.5 mm stone aggregate) on top with WPC, benching / haunching, repair to broken plaster with dubbing coat including necessary scaffolding complete all as directed.
Taking out compete existing roof treatment from roof surface & roughening of old concrete floor surfaces including cleaning the roof surfaces by brushing sweeping etc and removing rubbish material complete all as specified and directed.
Material and labour for providing cement concrete (1:2:4) type BO using 12.5mm graded crushed stone aggregate as over roof for making good depression/undulation to make the existing as filling in depression of roof slab and roof kerb complete all as specified and directed.
M&L rendering 10 mm thick screed bed on concrete surface in CM (1:4) & water proofing compound mixed with @ 3% finished fair and even. ( Note -W.P.C. shall be measured and paid separately . )
M & L for brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed .
M & L for water proofing treatment on existing cleaned RCC roof with following specification and manufacturer Instruction complete all as specified as directed. (a) Applying hot blown bitumen primer confirming to IS-3384-1986 over the cleaned plaster surfaces as per IS-3067-1966. (b) Applying alayer of APP based polymeric membrane 3.0mm thick (minimum) weighing 3.0 Kilogram per sqm (reinforced with polyster non oven fabric weighing not less than 160 Gmss per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (c) applying one coat of aluminum paint @ 0.10 Litre per Sqm Over APP based Polymeric membrane.
M&L for cleaning new plastered surfaces of walls, soffits of chajja, roof slab etc, using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc complete with one coat of putty ghola and applying two coats of weather proof exterior emulsion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over two coats of suitable exterior damp proof primer with brush finished with gargo machine over 1mm thick exterior wall care putty, including necessary scaffolding, safety and protective measures for upto 4 storey building height complete all as specified and directed.
M&L for cleaning old treated surface of wall, soffits of chajja, roof slab etc, with using high pressure jet washer including cleaning the surface by scarping as required using emery paper, putty blade/ scraper as applicable for removing loose paint, corrosion, algae formation etc complete with touchup putty wherever required with applying two coats of weather proof emulsion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over one coat of suitable exterior weather proof primer with Grago machine over 1mm thick exterior wall care putty, including necessary scaffolding, safety and protective measures upto 4 story building height complete all as specified and directed Make: Asian (Ultima Superma) or equivalent other makes specified in the tender Note for item No. 21, 22 & 23. The all process of painting will be carried out of Manufacturer authorised representative only, Jet Water machine and Graco Spry painting Machine shall be borne by the contractor and also the contractor should provide adequate jet and Spray machines as per site requirement as directed by Eng-in-Charge.
M&L for preparation of old cracks on the wall surfaces by raking out joints, hacking for key and 'V' groove cutting with a grinder or hammer & chisel, upto 5 mm thick, properly cleaning and filling with crack filler, as per manufacturer's specifications, finished smooth and even with exterior wall putty complete all as specified and directed.
All as per item No.53 above, but for cracks upto 5 - 10 mm thick. (Make: Dr Fixit, Crack - X Shrink free / Asian Paints, Smart care Textured Crack Filler or equivalent product in other paint/building chemical mentioned in tender).
S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. Minimum weight 60gms) all as specified and directed.
S&F in repairs for Vitreous Cliina wash basin, white, flat back, size 580x450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including PTMT waste coupling of 32mm bore and all connections complete all as specified and directed
S & F in repair vitreous China wash down water closet pan (Pedestal pattern), white (EWC) with ‘P’ or ‘S’ trap, including connection to drain or outgoing pipe and including with 10 ltr capacity PVC flushing cistern, including brackets for flush tank, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings, inlet, outlet pipe connections, and plastic water closet seat cover, closed pattern with recessed bottom cover and mild steel chromium plated hinge all as specified and directed.
On site LLDPE first quality septic tank, heavy duty min wall thickness 100mm, designed to carry sewage and sullage water, excavation in any tye of soil, PCC 1:4:8 below foundation, vent shaft, connection etc., with upflow filter including media for 20 users incl refilling and removing excavated soil and ramming to made good the disturbed surfaces complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes complete all as specified and directed .
S&F in repair 110 mm PVC (SWR) access door bends any radius including taking down old complete all as specified and directed by Engr-in-Charge.
Supply & fix in repairs 15 mm bib taps, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
S&F 15mm bore GI water tubing medium grade laid in floors complete all as specified and directed.
All as per item No 63 above but 20 mm bore.
Supply & fix in repairs 15 mm stop valve fancy type chromium plated (concealed) type with long shank & cup 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.
S&F PVC Connection 600 mm long complete all as specified and directed including taking down ..
S&F PTMT body health faucet with 1.2 metre long flexible PVC tube in fixed with wall incl hook complete all as specified and directed.
Supply & fix in repairs pillar taps cast copper alloy with capstan heads, chromium plated, fancy type 15mm bore screwed down high pressure with lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S&F in repair 10 Ltr capacity PVC valve less symphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed
Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed
Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CESZ/TD-1018/2011 sheet no 1/3
S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed .
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete bricks surrounds glazed with putty or fixed with beads complete all as specified and directed.
S & F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified and directed.
S&F Factory made single extruded fully solid WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
Supply & fixing 100 mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.
S & F aluminum handles 150 mm long cast type, anodised complete all as specified and directed.
S & F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed.
S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper of any colour complete all as specified and directed.
M&L for preparation of old painted wooden or wood based surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L applying one coats of synthetic enamel paint on old steel surface of any description over 10 cm width or girth complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface complete all as specified and directed .
S&F steel rolling shutters 1.25mm thick w/o ball bearing as specified incl top cover arching rod, hasp and staple and one soap coat of primer, eructed in posn as indicated, complete push and pull or mannual type complete all as specified and directed .
S&F safely layer locks mild steel with 4 layers for rolling shutter complete all as specified and directed .
S&F ball bearing for rolling shutters complete all as specified and directed .
M&L for preparing new plastered surfaces of wall and applying two coats of Oil emulsion distemper of any colour over a coat of primercomplete all as specified and directed .
SCHEDULE 'A' PART-II (ELECTRIFICATION WORKS)
Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed.
Material and labour for point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC concealed conduit including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed as below :- (a) One light/fan point controlled by one, one way switch.
All as per item No 89 but One 3 Pin 5 Amps socket out let point on independent board.
All as per item No 89 but One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switches.
All as per item No 89 here-in-before but using 2.5 sqmm PVC FRLSH insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed.
Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specified/directed.
Supply and fixing of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.
Supply & fixing of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified / directed.
Supply and fixing of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed.
Supply & Fixing of ceiling fan regulator electronic, Deluxe, rotary, step type, 120/280 volts as specified/directed.
Supply and fixing of ceiling rose surface PVC/ Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed.
Supply and fixing of LED tube light fittings 1x20 W, 220 Volt, AC decorative box type with driver ,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .
Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. Make : C&S cat part No CSDBSPNPEDD08/L&T cat part No DBSPN008DD/Legrand/Schneider
Supply and fixing in repair of MCB SPN DB 4 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. Make : C&S cat part No CSDBSPNPEDD04/L&T cat part No DBSPN004DD/Legrand/Schneider
Supply & fixing in repair of MCB SPN 32 Amps 'B' Series 10 KA 240 volts complete all as specified/directed. Make : C&S cat part No CSMBS1B16N/L&T cat part No BB20320B/Legrand/Schneider/L&T
Supply & fixing in repair of MCB SP 6-32 Amps 'B' Series 10 KA, 240 volts complete all as specified/directed. Make : C&S cat part No CSMBS1B20/L&T cat part No BB10200B/Legrand/Schneider/L&T
S&F for 32 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 32x6 mm, 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles/bldgs for security incl taking down old unsv complete all as specified and directed.
Supply and fixing of LED street light fittings in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics, covered with IP66 protection with inbuilt surge protection of minimum 5 kV of capacity 30W incl taking down old unsv complete all as specified and directed. Make: Bajaj cat part No ENXT P 30L WH CR PC SD (White) IP66/Havells Endura Pearl/CG equivalent model in other makes specified in particular specifications)
Supply and fixing of post top lantern of capacity 25 W, energy saving environment friendly long life made in die cast aluminium with innovative glare free indirect lighting distribution & IP 65 protection complete all as specified and directed by Engr-In-Charge. Make :Bajaj cat part No BGCL $)25W LED WH equivalent model in other makes specified in particular specifications)
Supply and fixing of PVC insulated and PVC sheathed multicore cable with electrolytic grade annealed copper conductor of size 6 sqmm 2 core suitable upto 1100 volts grade confirming to IS: 694 run through PVC conduit of size 25 mm and connected to DP enclosure complete all as specified and directed by Engr In Charge.
Supply and fixing of rectangular shaped integral decorative LED bollard of capacity 9W with opal acrylic diffuser and IP 65 protection including suitable size of nut and bolts to fix on foundation complete all as specified and directed. Make: Bajaj BGBOS 605 9W LED WW equivalent model in other makes specified in particular specifications)
Taking up / down unserviceable / rust valve pit cover and frame / support or platform etc of any size/thickness and supply, fabrication and fixing of framed brackets, rolling shutters, made of mild steel plate/ flat / angle iron (of required size), cut to shape and size, as in valve pit cover/ frame / support or platform including necessary bending / welding etc as required and applying two coats of black bituminous paint over a coat of red oxide zinc chrome primer complete all as directed.
Material & labour for Sub main wiring with two runs of single core 2.5 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn through and including PVC casing capping/conduit of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standard copper conductor of size 2.5 Sqmm as earth wire (green in colour) run through PVC casing capping/conduit and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.
Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn through and including PVC casing capping/conduit of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi slandered copper conductor of size 4 Sqmm as earth wire (green in colour) run through PVC casing capping/conduit and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. Make of wire:Havells/FInolex/ Polycab
Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised iron strip of size 32x6 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar, funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary excavation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.Note:No extra payment will be made for the earthing strip of size 32x6 mm upto 7.5 mtr length. Make :As per sample
Supply and fixing of GI strip 25x4 mm with porcelain saddles fixed to wall or recess or chases or burried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required as in repair complete all as specified and all as directed.
Supply and fix in repairs MS pump set base frame suitable for 5 to 15 HP pump set incl necessary dismantling of old PCC and provision of new PCC 1:2:4 type B1(20mm grade stone aggregate) foundation, MS foundation bolt, nut & washers as in repairs complete all as directed.( Note:- Quoted rate is deemed to be inclusive of the cost of PCC foundation.
Supply only,Poly Aluminum Chloride (PAC) suitable for drinking water, high basicity in granular/ powder form inorganic soluble polymer confirming to IS 15573 in required pack. Make : Vikram PAC or Equiv
Supply only , High strength calcium based granular chlorination chemical (Calcium Hypochlorite in 45 Kg Drum) having chlorine (cl) percentage by volume 65% to 70% (disinfectant for water treatment). Make: Purichlor /Aqua fit /declibac or any make and brand as approved.
Supply and fixing in repairs LED aviation light luminaire integral type comprising aluminium housing with poly carbonate enclosure , incl fixing arrangements for fixing luminaire on top of OH tank incl fixing arranging taking down existing luminaire complete all as specified & directed. Make:- Bajaj cat No BGAV 302 LED /HALONIX, Cat No HAVL 01 S 230 or equivalent model in other makes specified in particular specifications)
M&L for 50W LED flood luminaire with ultra seek , light weight and secondary optics , made of pressure die cast iron housing with IP66 ingress protection and impact resistance . 4kV inbuilt and 10kV external surge protection ,complete all as specified and as directed. Make: Cat pat No BJFL 50W LED / C&S / Havells equivalent model in other makes specified in particular specifications)
S&F in repair shock treatment board printed on Flex sheet, of size 100 x 100 cm, with standard diagrams and contents written in three versions (i.e English, Hindi & Bengali and the size of letter not less than 15 mm height), fixed on suitable PGI sheet enclosure structure with angle iron/MS flat support, with provision of 02 Nos 10 Watt LED tube rod inside, fixed with screw on wall as in repair, complete all as directed.
Supply and fixing in repair board on Flex sheet , size of board 145cm X 75cm with " Pump House contents written in and the size of letter not less than 15mm height ) on 6mm thick BWR plywood base with wooden bedding on all sides , fixed with screw on wall complete all as lete all as specified & directed.
S&F in repair board printed on Flex sheet, size of board 30 cm x 20 cm with "Pump/Motor capacity & make details, written in and the size of letter not less than 15 mm height) on 6 mm thick BWR plywood base with wooden beading on all sides, fixed with screw on wall complete all as directed.
Supply and fixing glow sign board printed on flex sheet , size of board not less than 5 mtr X 1.00 X 0.20 mtr with " Pump House " contents written in and the size of the letter not less than 20mm height , on 6mm thick polysheet on front and GI sheet backing on rear, sides, top and bottom including fabrication with necessary clamps including providing 06 nos 10 watt LED tubes with necessary wiring with copper wire, duly fixed on top of gate etc complete all as lete all as specified & directed.
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 5000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed.
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 2000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed.
Construction of valve chamber of size750x750x750 mm internal size suitable for housing sluice valve / gate valve etc with PCC 1:4:8 type D2 for foundation 15mm thick with an offset of 5 cm on all sides, brick work in CM 1:4 230mm thick rendering in CM 1:4, 15mm thick, 5 cm thick & 230mm wide PCC 1:2:4 type B1 coping over brick work all around including provision of MS angle iron frame 25 x 25 x 3mm embedded in concrete with suitable hinges 3mm thick MS sheet cover and locking arrangements including two coats of synthetic enamel paint over a coat of red oxide metal primer on exposed steel surfaces including demolition of existing damaged valve chamber and necessary excavation & earth work etc all as specified and directed.
MS HORIZEN
SK CONSTRUCTION SYNDICATE & ENGG CO
JOY RAM ENTERPRISE
MS JYOTI INDUSTRIES
SINHA ENTERPRISE
JOY-EN-JOY
MS AP CONSTRUTION AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .