Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.0 LAccepted-Finance | L1 | Accepted-Finance Admitted | |
| 2 | L2₹41.1 L+₹9,815.56 (0.24%)Accepted-Finance | L2 | Accepted-Finance Admitted |
Tender Value
₹41.4 L
EMD Value
₹42,000
Closing Date
28 Jun 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Village Panchayat President venkatesapuram
The Village Panchayat Office venkatesapuram
Krishnagiri DT Shoolagiri Block Under Mines and Mineral 2022-2023 Constructions of Village Secretariat Type II Building at Venkatesapuram Village in Venkatesapuram Panchayat SIGVENK-02
2024_RDTN_455513_1
RocNo_6322_2022_A4_11_02_2024
Open Tender
Civil Works - Buildings
Item Rate
180 days
Shoolagiri
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹42,000
The Village Panchayat Office venkatesapuram
4 Jul 2024
20 Jun 2024
28 Jun 2024
20 Jun 2024
28 Jun 2024
20 Jun 2024
24 Jun 2024
Amount
1.Construction of Village Secretariat type II Building Venkatesapuram Village H/o Venkatesapuram Rs. 41.40 Lakhs
Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete
Supplying and filling in foundation and basement with filling M-Sand including water consolidating etc.,
Supplying and Filling conveyed earth with a lead of 5km for basement filing
Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed
Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. Rate for 10m3
Up to Basement
Above Basement to Ground Floor
First Floor
Supplying and erecting steel centering for Plane surfaces RC slab, beam, lintel bed block landing slab waist slab etc.,
Up to Basement
Grade Beam to Base
Sunshade
First Floor
Sunshade
Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs
Column
Ground Floor
First Floor
Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
Paving the floor with best approved quality fine polished kota stone slabs of size 600 x 600 x 18mm / 20mm thick machine cut edges and matching marbles slab not less then 200 thick using cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
Supply and Cost of rolling shutter, doors, windows & Ventilator
Supply and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI Sheet. The Shutter shall be Painted with one coat of red oxide primer and the rate is inclusive of hood covers, Transportation charges etc., all complete (Rooling Shutter)
Supply and erectingof Collapsible gate including all cost and conveyance of men and materials etc., . The Shutter shall be Painted with one coat of red oxide primer and the rate is inclusive of hood covers, Transportation charges etc., all complete CG
Ventilator (0.90 X 0.60)
Ventilator (0.60 X 0.45)
Door D
Door D1
Door D2
Window W1
Window W2
Window W3
Fixing Charges of steel Doors, Windows and Ventilators
Windows
Doors
Supplying and painting two coats new iron Work such as steel doors ventilators, Window bars Etc., (Without Primer)
Roofing with best Quality tuflon sheet
Construction of Cup Board With Shutter
Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. Rate for 10m3
Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Provinding Cuddapah Slab 38 to 40mm for Shelfs etc., All Complete
Labour Charges for Fixing cuddapah slab 38 to 40 mm for Shelfs etc., all Complete
Providing Cup-board Shutter with Frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the deparmental officers. The Design pattren, water proof Plywood, Laminate sheet and other materials should be got approved from the Executive before use on Work
Provision for Electrification
Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 20
Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36
Supply and run of 4x6 sqmm (84/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 68
Supply and run of 4 X 6sq.mm (56 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 73
Supply and fixing of 1200 mm( 48'')Ac Ceiling fan Complete with Stepped electronic 300 W Regulator with 300 mm down rod on the Existing Clamp. SD 110
Supply and fixing of 300mm (12") sweep (lightduty) Ac exhaust fan complete without provision of hole in the wall SD no 115
Supply and fixing of CFL bulb SD no 80
Supply and Fixing of WT bulk head fitting with guard for 11w CFL SD 83
Tube Light SD 88
Supply and Fixing of TNEB meter Board suitable for 32A single Phase Service Connectin with 32A fuse unit on TW Plank on wall with earth connection and inter Connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD 125
Supply and fixing of DPI main Switch SD No 142
Earthing as per the ISI Specification with an earth Electrode of 2.10 metre Class B GI pipe of dia not less then 40mm with Copper earth plate of size 125mm X 50mm X 6mm With Necessary Funneling Arrangements with necessary masonry work and with 38mm RCC Cover slab for the brick masonry
Provision for Cuddapah slab for Seating Arrangements in waiting area
Provision for Rain water Harvesting Structure
Earth work Excavation in SDR- Earthwork Excavation and Depositing with in initial lead of 10m and lift of 2m (for roads, Supply channels, desilting of MI tanks, ponds & Kulam) -upto 0.30m Depth
Earthwork Excavation and Depositing with in initial lead of 10m and lift of 2m (for roads, Supply channels, desilting of MI tanks, ponds & Kulam) -upto 0.30m Depth
Earthwork Excavation and Depositing with in initial lead of 10m and lift of 2m (for roads, Supply channels, desilting of MI tanks, ponds & Kulam) -upto 0.30m Depth
Collection and supply of sand filling into the basement including cost and conveyance to the site and all labour charges.
Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.
Collection and supply of filling the stones in soakpit including cost and conveyance of materials to the work site and all labour charges.
40 mm metal
20 mm metal
Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.
Provisions for supply and fixing of precast RCC cover slab including cost and conveyance of materials and all labour charges
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
Provision of Water Supply Arrangements
1000 Ltr Tank
32mm PVC Pipe
32mm PVC Bend
25mm PVC Pipe
25mm PVC Elbow
25mm PVC Tee
25mm X 20mm PVC Reducer
Brass Chromium Plated Piller Tap
Provision of Sanitary Arrangements
110mm PVC Pipe
110mm PVC Bend
110mm PVC Tee
110mm PVC Pipe Cowl Pipe
110mm PVC Pipe Vent Cowl
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone M.Sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone M.Sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
Europeon Water Closet with all fittings and 10lit capacity flusing tank
Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification. (The squatting urinal should be got approved by the Executive Engineer before use on works).
PVC Nahini Trap 100 X 75mm
Provisin for Angle Cok
Provision for Grab bar for Disable Person one in toilet and one in ramp
Provision for Name Board Charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
Velu contractor (BID ID -1072145)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .