PROVN OF 05 X CLORINE DOSING PUMP CUM PUMP HOUSE AND PROVN OF LT PANELS FOR GR, EME BN AND KILKARI PARK AT DIPATOLI POCKET OF RANCHI MIL STN

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, n.exc 10 sq.m on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40mm graded stone agg as in fdn filling mass concrete.

M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6) complete all as specified and directed

M & L for DPC 25mm thick in cement concrete 1:2:4 type B0 and applying evenly One coat blown type bitumen @ 1.50 Kg per Sqm and binding with clean dry sand @ 0.05 Cm per sqm on horizontal or vertical surface including necessary form work all as specified and directed

Returning/filling in layer n'exc 25 cm thick including spreading, levelling watering well ramming etc. complete all as specified and directed

Removing excavated soil to distance n'exc 50 mtr and deposited complete all as specified and directed

Brick work with Sub-Class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in (1:4) Cement motar complete all as specified and directed.

M&L 15mm thick plastering on wall concrete surfaces in cm (1:6) finished even and smooth w/o using extra cement complete all as specified and directed.

M&L 15mm thick rendering in CM 1:4 on brick/concrete surface, finished the surface even and fair with using wpc. Note :- (WPC shall be measured and paid seperetely)

Supply only integral water proofing compound complete all as specified and directed

M&L hard core of gauge n'exc 63 mm of broken stone or boulders deposited spread and leveled in layers n . exc 15cm thick, watered and rammed to a true surface complete all as specified and directed

M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick as in plinth protection /path etc. complete all as specified and directed

M&L cement concrete 75mm thick as in sub base of floor type C2,1:3:6 using 40mm graded stone aggregate complete all as specified and directed.

M&L Cement concrete in floors 40mm thick over sub base (1:2:4) using 20mm graded aggregate finished even and smooth without using extra cement complete all as specified and directed

M&L preparation of newly plastered surfaces and applying 3 coats of white wash on ceiling complete all as specified and directed

M&L preparation of newly plastered surfaces and applying 3 coats of white wash on wall complete all as specified and directed

M&L preparing new surface on walls and applying 2 coats of cement based paint over one coat of primer on external walls complete all as specified and directed

S&F 10mm dia and over deformed/TMT treinforcement,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia complete all as specified and directed

S&F 6 to 8mm dia and over deformed/TMT treinforcement,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia complete all as specified and directed

All as per item No 20 above but 8mm dia as in stirrups complete all as specified and directed

M&L Reinforced cement concrete in mix 1:1½:3 (using 20mm graded aggregates) in foundations, including rafts, footings, plinth beams etc complete all as specified and directed.

All as per item No 22 above but in Columns, pillar complete all as specified and directed

All as per item No 22 above but in chajjas complete all as specified and directed

All as per item No 22 above but in beams and lintel complete all as specified and directed

M&L formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits of foundation and plinth beam, and similar work, vertical or batter work fair finished flat surface of concrete complete all as specified and directed.

All as per item No 26 but in columns/post complete all as specified and directed

All as per item No 26 but in Chajjas complete all as specified and directed

All as per item No 26 above but in sides and soffits of beams complete all as specified and directed

Forming Contration (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound (1 part of bitument and 3 part of sand) complete all as specified and directed.

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood glazed and skelton shutters, 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mtred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed

S & F mild steel butt hinges 100mm long medium weight cold rolled , complete all as specified and directed.

S&F mild steel sliding door bolts 300mm long complete all as specified and as directed

S & F 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed

S & F 150mm long Aluminium handle cast type anodised complete all as specified and as directed

S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete withot glazing bars dovetail ed or welded all complete all as specified and as directed

S & F Sheet glass, figured glaas ,pin headed in square n exc 0.5 sqm in each pane, 3mm thick complete all as specified and directed

S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and as directed

S&F Pre-painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

M&L for MS work as in Roof trusses (Fe 410W Gde E-250 quality A) (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S&F plates (plain or chequered)channels, square cut or notched(odinary and couter sunk) forming holes, without any attachment of Gde Fe 410-W (Gde-E- 250) complete all as specified and directed

M&L preparing new surface of steel any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed

All as per item No 46 above but n exc 10 cm width or girth complete all as specified and as directed

M & L preparation of new surfaces & apply two coats of synthetic enamel paint over one coat primer exc 10 cm width/girth including preparation of new surface on wooden surface complete all as specified and as directed

Supply , Install, Test and commissioning of Chlorine dosing system of capacity 6HP, 4KG/cm2 with suction of discharge tube and suitable hose holder connection including following :- As ISI Marked Make : (a) Suction & Discharge Tubing of LDPE material 2.5 Mtrs in length with 1/4" Hose Holder connection. (b) Stainer Cum Foot Valve, Antisyphon Valve in PP Built in Electrical cable molded with Plug Instructions manual. (c ) Tank (MOD : HDPE/LDPE) 100 Liters and Tank Agiator Slow speed Agitator 0.25 HP single phase 230 v supply. (d) Control Panel for chlorine dosing system chlorine can be adjustable according to meet water requirement to meet desired chlorine valve in this pump start & stop will be installed on raw water line . Tank (MOC LDPE) 100 ltrs slow speed agitator 0.25 HP single phase , 230 v supply 1 working +1 stand by pump )

Taking down outdoor type LT Panel with by disconnecting all connections very carefully of any size and capacity and complete all as specified and directed at site

M&L for PCC (1:3:6) type C1 using 20 mm graded stone aggaregate in kerbs/coping /bed plates and like including weathering slightly rounded or chamfered complete with necessary use and waste fo form work complete all as specified and directed.

M &L for GI Earthing complete with GI earth plate electrode 60cm x 60cm x6 mm buried directly in ground verticvally to size of earth pit not less than 0.90x 0.90 x 2.25 mtr below ground level with top edge of the plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised earth strip of size 32 x 6 mm, 7.5 mtr long (Min) by means of brazing nuts, bolts, check nuts, & washers ,testing of completion (drawn in earth strip protection pipe light gade GI of size 40 mm dia) by means brazing at both edges with vertical plane of electrode all as shown in plate No 3 of SSR Part - I filling with charcoal dust , and common salt , including necessary excavation and earth work in any type of soil ,perforated watering pipeof size 15 mm dia,funnel with wire mesh,earth strip protection pipe light grade PCC chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 Type B1,450 x450 x50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed by EIC Note : (i) 7.5 RM GI earth wire deemed to be included in quoted rates beyond 7.5 RM wire shall be measured and paid separately. (ii) Earth resistance of earth pit should be not more than 02 Ohms on testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to included salt & Charcoal upto & above 450 mm (Min) top of GI Plate.

S&F GI earth strip (32x6) mm strip with and including necessary clamps, nut bolts laid in ground complete all as specified and as directed.

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.

Supply and laying burnt bricks old size sub class-B laid in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed.

M&L for trenchless boring under road crossings/foot paths by manual / Boring machine complete all as specified and directed at site.

Supply and fix in replacement of 50 mm bore GI pipe light grade fixed on pole /trenches/wall/road crossing etc complete with clamp nut bolt etc all as specified and directed at site.

Supply,laying,jointing,testing and commissioning XLPE insulated, armoured, heavy duty, LT UG cable with aluminium conductor,1100 volts grade cross sectional area 240 sqmm 3.5 core connected with aluminium lugs connected by cramping tools all as specified and directed at site.

All as per Srl items No.61 here-in-before but of size 120 sqmm x 3.5 core complete all as specified and directed

All as per Srl items No.61 here-in-before but of size 95 sqmm x 3.5 core complete all as specified and directed

All as per Srl items No.61 here-in-before but of size 70 sqmm x 3.5 core complete all as specified and directed

All as per Srl items No.61 here-in-before but of size 50 sqmm x 3.5 core complete all as specified and directed

All as per Srl items No.61 here-in-before but of size 25 sqmm x 4 core complete all as specified and directed

M/S OMANIA ENTERPRISES

m/s sheo kumar singh & sons

M/S Bhushan Kumar Jain