Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAccepted-AOC BABU RAM THAKUR NIWAS BELOW UTTAM GAS AJANCY DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹5.7 L | L1 | Accepted-AOC Awarded |
| 2 | L2₹5.9 L+₹12,513 (2.18%)Rejected-Finance 00 AGRA AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | ₹5.9 L+₹12,513 (2.18%) | L2 | Rejected-Finance 2nd Lowest |
| 3 | Rejected-Technical | - | - | Rejected-Technical No |
| 4 | Rejected-Technical H NO 9 1 JATHOGH CANTT TOTU DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | - | - | Rejected-Technical No |
Tender Value
Refer Docs
EMD Value
₹11,300
Closing Date
16 Apr 2022, 4:00 pmClosed
Executive Engineer Division No-IHPPWD Shimla-3
Executive Engineer Division No-IHPPWD Shimla-3
C/O Steel Structure stand in IT Bhawan Mehli Kasumpti Shimla-9 (SH C/O steel structure water tank and 2 Nos 2000 litrs capacity PVC water tank).
2022_PWD_59042_11
SD-I-CTR-Tender-21-22-31795 dt 01-04-2022
Open Tender
Civil Works
Item Rate
60 days
Shimla
As Per SBD
14 documents required · 14 mandatory
₹350
₹11,300
7 May 2024
8 Apr 2022
18 Apr 2022
8 Apr 2022
16 Apr 2022
8 Apr 2022
Amount
Demolishing cement concrete manually/ by mechanical means including disposal of material within all leads including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i)1:2:4 (One cement : two coarse sand) : four graded stone aggregate 20 mm (twenty milimetre) nominal size)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
Providing and fixing M.S. welded mesh 25mmx25mmx3mm(twenty five milimetre into twenty five milimetre into three milimetre) thick as per approved design welding with electric plant complete including applying priming coat of red lead paint as per HP PWD Specification 1990 Volume-1 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) One or more coats on old work.
Providing and fixing 0.60mm(zero point six zero) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns rimer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers omplete with all accesoriees as required as per the direction of Engineer-in-charge.
Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm( Fifteen milimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto a height of 10 metres (ten metres) above ground level including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i) 2000 litres(Five thousand litres) net capacity tank
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)25 mm(twenty five milimetre) dia nominal bore
(ii) 32 mm dia nominal bore
Providing and fixing G.I./M.I Union of following sizes (where not included in the items ) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( i)25mm(twenty five milimetre)
(ii) 32 mm (Thirty two milimetre)
Providing and fixing brass full way valve with wheel including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(a)32mm(Thirty two milimetre) nominal bore
pawan kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .