REPAIR TO EXTERNAL WATER SUPPLY PIPE LINE AND CONNECTED ITEMS AT SOUTH CAMP WEST CAMP EAST CAMP NORTH CAMP DBS AND MOTIGARH PUGAL AND RD 498 ASCON NODE UNDER AGE MFFR UNDER GEN BIKANER

Amount

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

Dismantling and taking up or down DI pipe and connections of 200mm bore, laid in trenches, complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 200 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches complete all as specified & as directed. Note :- Excavation & earthwork, DI fittings / specials & joints shall be measured & paid for separately under relevant items of this Schedule.

Supply and fixing rubber gasket tyton joint (push on joint) including rubber ring suitable for 200mm bore socket & spigot DI pipe and fittings complete all as specified and as directed.

Dismantling and taking up or down DI pipe and connections of 150mm bore, laid in trenches, complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Supply, laying, jointing and testing centrifugally cast Ductile Iron spun pressure pipes (Class K9) of 150 mm bore with internal cement mortar lining and external zinc coating (130 gm/sqm minimum) and bituminous finish layer (minimum thickness 70 microns) with socket & spigot ends (ISI marked) conforming to IS 8329-2000 suitable for push on rubber gasket/tyton joint laid in trenches complete all as specified & as directed. Note :- Excavation & earthwork, DI fittings / specials & joints shall be measured & paid for separately under relevant items of this Schedule.

Supply and fixing rubber gasket tyton joint (push on joint) including rubber ring suitable for 150mm bore socket & spigot DI pipe and fittings complete all as specified and as directed.

Dismantling and taking up or down steel water tubing and connections of 150mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 150 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Dismantling and taking up or down steel water tubing and connections of 100mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 100 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Dismantling and taking up or down steel water tubing and connections of 80mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 80 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 80mm bore obtained serviceable vide serial item No. 14.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors, trenches etc in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

Dismantling and taking up or down steel water tubing and connections of 50mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 50 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 50mm bore obtained serviceable vide serial item No. 17.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors, trenches etc in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

Dismantling and taking up or down steel water tubing and connections of 25mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 25 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Dismantling and taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for galvanized steel water tubing medium grade of 20 mm bore (ISI marked) with & including all fittings laid in trenches complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 150 mm bore, complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 100 mm bore, complete all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete all as specified & directed.

Supply and fixing non return valve (NRV) of size 100mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, class ‘PN-1.6’, gun metal seat, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve of 100mm bore. complete all as specified & directed.

Supply and fixing cast iron foot valve of size 80mm bore as per IS:4038 (ISI marked), swing type operation, flanged ends with rubber insertion sheet 3mm thick, nuts, bolts and washers including taking down old existing unserviceable foot valve of 80mm bore complete all as specified & as directed.

S&F 50 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 50 mm bore, complete, all as specified & directed.

S&F 25 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25 mm bore, complete, all as specified & directed.

S&F 20 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20 mm bore, complete, all as specified & directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 200 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 150 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 100 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs HDPE/PVC detachable joint with rubber ring, ISI marked, suitable for 200 mm bore HDPE/PVC pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs HDPE/PVC detachable joint with rubber ring, ISI marked, suitable for 160/150 mm bore HDPE/PVC pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs HDPE/PVC detachable joint with rubber ring, ISI marked, suitable for 100 mm bore HDPE/PVC pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

Supply and fixing 10000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I & PS Sec-II and as directed including disconnecting & taking down the existing unserviceable water tank.

Supply and fixing 5000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I & PS Sec-II and as directed including disconnecting & taking down the existing unserviceable water tank.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 200mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 150mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 100mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 80mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 80mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 50mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 25mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking joint of GI pipe or fittings of 20mm bore by dismantling joint and re-jointing with & including replacement of unserviceable fitting and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in replacement MCCB, 4 Pole, 200 Amps, rupturing capacity 35 KA, 415 Volt grade, AC, 50 Hz, adjustable Thermal - Magnetic release type, complete all as specified & as directed.

S&F in replacement MCCB, 4 Pole, 100 Amps, rupturing capacity 16 KA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type, complete all as specified & as directed.

S&F in replacement MCCB, 4 Pole, 63 Amps rating, rupturing capacity 16 KA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type, complete all as specified & as directed.

S&F in replacement Three Phase terminal box suitable for three phase motor as per existing type & size with all necessary fixing arrangement such as copper lugs, nut, bolts, etc complete all as specified and as directed.

S&F in replacement Power Contactor, 3 Pole, 18 Amp AC3 rating, 415 Volt, complete all as specified and as directed. Make : Type ‘MNX 18’ of L&T or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement motor Protection Relay suitable for 5 to 10 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

S&F in replacement Power Contactor, 3 Pole, 22 Amp AC3 rating, 415 Volt, complete all as specified and as directed. Make : Type ‘MNX 22’ of L&T or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement motor Protection Relay suitable for 20 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

S&F in replacement Power Contactor, 3 Pole, 25 Amp AC3 rating, 415 Volt, complete all as specified and as directed. Make : Type ‘MNX 25’ of L&T or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement motor Protection Relay suitable for 25 HP Pump set, 415 Volts, 50 Hz, 3 Phase, complete all as specified and as directed.

S&F in replacement star coupling of rubber for motor pumpset of capacity upto 40 HP complete all as specified and as directed.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Note :- Excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Note :- Excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 50 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Note :- Excavation & earth work shall be measured & paid for separately.

Dismantling of existing defective induction motor of the following size and make from the foundation, disconnecting the electric connecting coupling pulley and taking out to work shop cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with solid copper conductor (winding wire) complete including varnishing, drying ovening overhauling greeasing and fixing in the same position making necessary electric connection and testing on induction motor complete all as specified and as directed by Engineer-in-Charge.Note:- After repairs testing is carried out it site in presence of MES Rep and warranty of minimum 6 months 40 HP capacity, 03 phase, 415 volt 50 HZ any make/type

Ditto all as per item no 63 but capacity of 20 HP capacity, 03 phase, 415 volt 50 HZ complete all as specified and as directed.

Ditto all as per item no 63 but capacity of 15 HP capacity, 03 phase, 415 volt 50 HZ complete all as specified and as directed.

Ditto all as per item no 63 but capacity of 12.5/10 HP capacity, 03 phase, 415 volt 50 HZ complete all as specified and as directed.

Ditto all as per item no 63 but capacity of 7.5 HP capacity, 03 phase, 415 volt 50 HZ complete all as specified and as directed.

Ditto all as per item no 63 but capacity of 3/5 HP capacity, 03 phase, 415 volt 50 HZ complete all as specified and as directed.

Dismantling from foundation frame by disconnecting suction/delivery lines and coupling opening and transport to workshop and re-assembling after repair/replacement of defective parts of centrifugal pump set of capacity 40 HP, Make :- any make and replacement of worn out spare parts as mentioned under respective item No-70 here in after. Note for Sr Item No 69 to 81 :- After repairs testing is carried out at site in presence of MES Rep and warranty of minimum 6 months

Supply only the following spare parts for cetrifugal pump of 40 HP capacity make :- any make Inter stage ring

Gland cap CI with Nut bolt

Wear ring

Shaft sleeve bronze

Shaft sleeve nut bronze

Set of gasket

Bearing with housing DE

Dismantling from foundation frame by disconnecting suction/delivery lines and coupling opening & transport to workshop & re-assembling after repair/replacement of defective parts of centrifugal pump set of capacity 20 HP Make :- any make and replacement of worn out spare parts as mentioned under resective item No-72 here in after.

Supply only the following spare parts for cetrifugal pump of 20 HP capacity make :- kirlosker/CG /Kalsi Inter stage ring

Gland cap CI with Nut bolt

Wear ring

Shaft sleeve bronze

Shaft sleeve nut bronze

Set of gasket

Bearing with housing DE

Dismantling opening and reassembling after repair/replacement of U/S spare parts of mono block pumping set capacity 15/12.5/10 HP spare parts required shall be measured and paid for under respective item Sr No-74 of this schedule. Job includes disconnecting from base foundation frame disconnecting electrically, reconnection, re-fixing in position transportation to work shop & back make of pump : any make, any size

Supply only the following spare parts for mono block pump of 15/12.5./10 HP capacity make :- Kriloskar Gland bush,shaft sleeve,bronze nuts & impeller etc

Gasket

Ditto all as per item No. 73 but capacity 3/5 HP spare parts shall be measured and paid seperately for under respective item Sr No-76

Supply only the following spare parts for mono block pump of 3/5 HP capacity make :- Kriloskar Gland bush,shaft sleeve,bronze nuts & impeller etc

Gasket

Supply and fixed in replacement following items suitable for 40 HP motor pumping set Ball bearing as per existing for motor (SKF/NBC)

Ball bearing as per existing for Pump (SKF/NBC)

CI Impeller with locking screw & Nut

Supply and fixed in replacement following items suitable for 20 HP motor pumping set CI Impeller with locking screw & Nut

Ball bearing for motor (SKF/NBC)

Ball bearing as per existing for Pump (SKF/NBC)

Supply and fixed in replacement following items suitable for 15/12.5/10 HP motor pumping set Ball bearing as per existing for Motor 10/12.5 HP (SKF/NBC)

Ball bearing as per existing for Pump 3/5 HP (SKF/NBC)

Supply & Fix in replacement of the following parts of mono-block capacity 7.5 to 15 HP, Make-Kirloskar, Discharge 540 LPM at head 2980 RPM CI Impeller with locking screw & Nut

Ball bearing as per existing

Spacer as per existing

Set of Mechanical real as per existing

Supply & fix in replacement of the following parts of mono-block capacity 3/5 HP, Make-Kirloskar, Discharge 540 LRM at 16 head 2840 RPM CI Impeller with locking screw & Nut

Ball bearing as per existing

Spacer as per existing

Set of Mechanical real as per existing

M/s Rohit Construction Co.

AGGARSAIN BUILDERS

M/S Shree Ram Enterprises

M/s JUGAL KISHORE MISHRA AND SONS