Special Repair work of Commissioner Residence at Gurugram Civil PH Work RECALL

Amount

Providing & Fixing ceramic tiles/anti skid 400mm x 400mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO shall be used as approved by Engineer-in-charge (Double charged tiles shall be used (HSR-14.91) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete. (a) Size of ceramic Glazed tiles 300 x 450 mm of reputed manufacturer like:- [HSR 14.92(b)]. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO shall be used as approved by Engineer-in-charge (Double charged tiles shall be used (HSR-14.91) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Laying and fixing Granite stone in all shade,15mm to 18mm thick in flooring,laid in any pattern as specified over base of 20 mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment yo match the shade of granite including labour for fixing cramps pins and dowels etc.(excluding cost of granite stone) (HSR: 14.96)

Providing and fixing moduler kitchen ward robe under counter cabinet complete in all respect with 19mm laminated boards including the cost of binding tape, SS hinges, screws, chocks/cleats and stops etc of reputed make complete in all respect as per design approved by Engineer-in-charge.(N.S) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing and fixing moduler kitchen ward robe overhead cabinet complete in all respect with 19mm laminated boards including the cost of binding tape, SS hinges, screws, chocks/cleats and stops etc of reputed make complete in all respect as per design approved by Engineer-in-charge.(N.S) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing and fixing stainless steel baskets in kitchen ward robe of SS grade-304,crome finish fixed on channels of required size complete in all respect as desired by Engineer-in-charge. (The stainless steel basket shall be of premium quality of reputed manufacture) (NS) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material (i) Grain Trolley 17''x20''x12''

Plate 17''x20''x8''

Cutlery 17''x20''x4''

Multi Basket 17''x20''x8''

Providing & fixing channels complete in all respect. (N.S) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material (i) Channel 20''

Providing & fixing stainless steel handles and hinghes of ggod quality in drawers etc. complete in all respect (N.S) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material (i) Hinghes

Handles

Edge biding tape

Chowkats of commercial hard wood such as hillock, champ, chikrassy, and chaplash, etc., (Non-coniferous timber other than teak conforming to I.S. specification no. 1003 kiln seasoned), of doors and windows including iron hold fasts, corner straps, screws,(HSR-17.12)

Factory manufactured Solid Flush Door Shutter, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position. (Note:- reputed make such as Duro, Green, Kitply will be used as approved by Engineer-in-charge). HSR 17.93 (c) - Note 1 under 17.18]. (iii) 35 mm thick. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Factory manufactured wire gauze door and window shutters of commercial hard wood such as Hollock & Champ only. (non-coniferous timber other teak conforming to I.S. specification No. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position. (Styles and rails of windows shutter shall be 75 mm wide. (i) 30 mm thick. [HSR 17.92 (i) - Note 1 under 17.18]

Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (A) Single trap symphonic W.C. Suite (i) Single Color. [HSR 30.5 (a) (i)].

EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid. White plastic seat (Solid)(HSR 30.13 i)

Providing & Fixing in position best indian make (ordinary) Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; Size 560 mm x 450 mm with one no. tap [HSR 30.41(a)(v)].

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STEEL SINKS WITH COMPLETE FITTINGS AS FULLY DESCRIBED IN ITEM NO. 30.51 ABOVE. 600 mm x 450 mm x 200 mm(HSR 30.53a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER WITH 15 OR 20 I/D INLET. C.P brass telephonic shower.(HSR 30.66d)

PROVIDING AND FIXING IN POSITION GLASS SHELF FIXED IN WITH RAWL PLUGS WITH C.P BRASS SCREWS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. With C.P brass brackets and guard rail 600mmx125mm (HSR 30.69a i)

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. CP brass Soap dish 160 mm(HSR 30.70a-i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRRON Mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or c INDIAN MAKE 600 mm x 450 mm(HSR 30.71a-i)

Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer I charge)(HSR-30.75)(a) Bib cock long body

Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer I charge)(HSR-30.75)(c) Bib cock

Providing and fixing in position C.P brass stop cocks (as approved by the Engineer-in-Charge)(HSR-30.76)a) 15mm stop cock -i) Stop cock male and female end.

Providing and fixing 15 mm C.P brass Laboratory cock swan neck of best quality (to the approval of the Engineer-in-charge)two way (HSR 30.78 b)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE C.P BRASS WALL MIXER 15 MM Without Telephonic shower(HSR 30.81 b)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION C.P Brass 15 mm x 450 mm(HSR 30.82 b-iii)

Providing and fixing HDPE water storage tanks of sintex, Diplast, O.K. supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing Iin position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer.(HSR-30.119) 1000 Ltr. Cap.

CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating Size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame light duty single seal pattern I weighing 38 kg with C.C.topping )(HSR 29.84 b)

Providing & Fixing PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. [HSR 13.89] Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. (i) 100MM dia PVC pipe 6Kg. Pressure

150MM dia PVC pipe 6Kg. Pressure

Providing and fixing PVC Bend ISI Mark. (a) 100 mm dia PVC Bend (Note:- Reputed make PVC Bend such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. [HSR 13.90] (i) 100MM dia PVC pipe 6Kg. Pressure

150MM dia PVC pipe 6Kg. Pressure

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore(DSR 18.10.1)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore(DSR 18.10.2)

Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. In case colour chequered tiles in flooring are used increase the through rate of Item No. 14.45 by 10%(HSR 14.45+Note)

Providing and fixing 3mm Fiber Sheet of reputed manufactures Complete in all respect (N.S) Note:- The agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Wrought iron and mild steel (using angles, flats, square bars, tees and channels), ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12)

Terracing consisting of 19 mm thick heat resistant tiles for roof insulation ,300 mm x 300 mm laid on 20 mm thick 1:3 cement coarse sand mortor including grouting with neat white cement over average 75 mm thick screed of 1:8:16 including two coats of bitumen laid hot at 1.65 Kg per sqm on top of RCC slab & cleaning of top surface complete .the tiles shall be made of white cement blended with fibrous polymer having flextural stress value of ≥ 150 Kg/Cm 2 & thermal conductivity value ≤ 0.18 w/m.k(HSR 13.97)

Glossy Melamine polish of approved colour on new surface of door frames/chowkhats etc. including making base, sand papering to the required finish etc. complete as per directions of Engineer-in Charge (N.S)

Dismantling white or coloured glazed tiles (HSR 8.38)

Dismantling Roofing first class mud roofing(HSR 8.8a)

Dismantling Roofing demolishing mud phaska in tile terracing.(HSR 8.8g)

Providing and fixing aluminum work for doors, windows, ventilators and portions with excluded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with rowel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions hold fasteners, at top, button, and sides with required neoprene felt etc. aluminum sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, aluminum snap beading for glazing/paneling C.P brass/stainless steel screws, etc complete, shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required including Aluminum fitting.Add Rs. 15/- Per kg. extra if powder coating of 50 micron is done instead of anodizing in above item No. 9 &10.(HSR 17.96+note)

Providing and fixing glazing in aluminum door, windows, ventilator shutter and partitions etc. with pvc/neoprene gasket etc. complete (cost of aluminum snap beading shall be paid in the basis items With float glass panes of 5.00 mm thickness(HSR 17.98 b)

Providing Aluminum jail of thickness 7mm thick with openings-75 mm X 75mm of including anodizing and fixing in frame with cost of screws etc. complete.(HSR 17.100)

Providing & Fixing Vitrified Tiles 600mm x 600mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO shall be used as approved by Engineer-in-charge (Double charged tiles shall be used (HSR-14.89) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material Note:- In case of any difference in the unit & nomenclature of any of the HSR Items of Civil, P.H., & E.I. work depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.