Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹1.5 L+₹3,341 (2.29%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹1.5 L+₹7,564 (5.18%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | JAIN LUBRICANTS AND MOTOR SPARE PARTS L3 | VEE AUTO TRADERS L2 | R M ENTERPRISES L1 |
|---|---|---|---|---|---|---|
| 1.00 | Snow Plough Cutting Blades (MS Steel)
The snow plough cutting blades shall be fabricated from mild steel plates conforming to IS 2062 Grade A, with hardness up to ~130 BHN. Each blade shall measure 8 ft (2438 mm) in length, 10 in (254 mm) in width, and 1 in (25.4 mm) in thickness. The plates shall be supplied in plain condition and subsequently drilled and fitted by the department to suit the mounting pattern of the tractor plough frame. The approximate weight per blade is calculated as:
Volume = 2.438 m × 0.254 m × 0.0254 m = 0.0157 m³
Weight = Volume × Density of Steel (7850 kg/m³) ≈ 123 kg per blade
Dimensions for Bolt Holes, using 20 mm dia high tensile bolts (Grade 8.8/10.9, IS 1367). It is estimated that 12 holes per blade shall be drilled | 2 | no | 23,600 ₹47,200 | 23,000 ₹46,000 | 22,700 ₹45,400 Lowest |
| 2.00 | High Tensile Bolts & Nuts
Supply of high tensile bolts (Grade 8.8/10.9, IS 1367), dia 20 mm, length 100 mm, with nuts & washers, zinc plated. | 24 | no | 290 ₹6,960 | 285 ₹6,840 | 280 ₹6,720 Lowest |
| 3.00 | Hydraulic cylinders in Preet V Blade under high loads. With time, seals harden and wear, leading to internal leakage and reduced performance. Repair includes dismantling of hydraulic cylinders, replacement of OEM seal kits conforming to IS 11875, honing/smoothing of cylinder barrel surfaces to remove scoring, and polishing of piston rods to restore sealing efficiency. Pressure testing is carried out at working pressures (~200 bar) as per IS 10522. This ensures restoration of full hydraulic efficiency, prevention of oil leakage, and smooth operation of lifting and digging functions during snow clearance duty | 1 | job | 19,500 ₹19,500 | 19,300 ₹19,300 | 19,000 ₹19,000 Lowest |
| 4.00 | Engine Oil
15W-40 API CI-4 grade diesel oil, OEM approved. (Provided by the department) | 13 | ltr | 348 ₹4,524 | 345 ₹4,485 | 340 ₹4,420 Lowest |
| 5.00 | Engine Oil Filter
• OEM compatible cartridge | 1 | no | 1,200 ₹1,200 | 1,180 ₹1,180 | 1,100 ₹1,100 Lowest |
| 6.00 | Transmission & Hydraulic Oil
• UTTO / SAE 10W-30. Qty 50 L | 50 | ltr | 350 ₹17,500 | 320 ₹16,000 | 315 ₹15,750 Lowest |
| 7.00 | Hydraulic Filter / Strainer • OEM compatible | 1 | each | 1,860 ₹1,860 | 1,800 ₹1,800 | 1,720 ₹1,720 Lowest |
| 8.00 | Front Axle Gear Oil • SAE 80W-90 | 8 | ltr | 300 ₹2,400 | 290 ₹2,320 | 275 ₹2,200 Lowest |
| 9.00 | Steering Hydraulic Oil • ISO VG 46 | 3 | ltr | 295 ₹885 | 292 ₹876 | 285 ₹855 Lowest |
| 10.00 | Coolant • Premixed ethylene glycol | 15 | ltr | 255 ₹3,825 | 250 ₹3,750 | 245 ₹3,675 Lowest |
Tender Value
₹1.5 L
EMD Value
₹2,928
Closing Date
3 Nov 2025, 12:00 pmClosed
EXECUTIVEV ENGINEER M AND H DIVISION DODA
KHELLANI DODA
REPAIRS AND REPLACEMENT OF PARTS FOR PREET 90 HP 1486 B TRACTOR WITH V BLADE
2025_PWDJK_293468_1
MHDD/TS/2025-26/75
Open Tender
Repair and Maintenance Works
Turn-key
10 days
KHELLANI
AS PER SBD
2 documents required · 2 mandatory
₹200
EXECUTIVEV ENGINEER M AND H DIVISION DODA
₹2,928
19 Nov 2025
28 Oct 2025
3 Nov 2025
28 Oct 2025
3 Nov 2025
28 Oct 2025
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.54 MB
BOQ_948524.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .