ADDITION / ALTERATION TO BUILDING NO. P-95 (06 MARRIED ACCOMODATION) AT AFAC COIMBATORE

Amount

Surface excavation not exceeding 30 cm and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for manholes, sewage line etc not exc 10 sqm on plan and getting out in any type of soil, complete all as specified and directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed.

Removing surplus excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.50 mtrs above the starting point complete all as specified.

Material & Labour for 50 mm thick sand felling under floors or in foundation including watering and consolidation, complete all as specified and directed.

Material & Labour for 100mm thick Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors, complete all as specified and directed.

Material & Labour for providing and injecting Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes in apron complete all as specified and directed.

Material & Labour for providing and injecting At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.

Material & Labour for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregates) as in foundations, filling and mass concrete, complete all as specified and directed.

Material & Labour for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and as directed.

Material & Labour for Reinfocement Cement Concrete 1:2:4 type B1 (20mm graded aggregate) in slab supoorted on walls , beams, columns in floor, roofs, landings, balconies, canopies deck slabs and in shelves and the like all as specified and directed.

Material & Labour for Providing cement concrete of 1:2:4, type B1 (20mm greaded aggregate) in coping, roof kerbs or mud stops, rounded or chamfered on edges, complete, all as specified and directed.

Material & Labour for 40mm thik Plain Cement Concrete type B-0, 1:2:4(12.5mm graded aggregate)) for padding concrete over the roof slab complete all as specified & directed.

Material & Labour for plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, complete all as specified and directed.

Material & Labour for PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) for coping and benching inside the manholes including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.

Providing precast cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in cover slabs for manholes etc, set in cements mortar 1:6 complete all as specified and directed. (Note : Steel reinforcement shall be measured and paid for separately)

Material & Labour for Providing Precast Reinforced cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) as in manhole covers, set in cement mortar 1;4 including necessary form work and moulds complete all as specified and as directed. (Note : Steel reinforcement shall be measured and paid for separately)

Material & Labour for RCC1:2:4 type B1 (20mm graded aggregate) in slab supoorted on walls , beams, columns in floor, roofs, landings, balconies, canopies deck slabs and in shelves and the like all as specified and directed.

Material & Labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc

Supply only Intergral waterproofing compound complete all as specified & dircted.

Brick work with fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) but except bricks, complete all as specified & dircted.

Material & Labour for brick work with fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4), complete all as specified & dircted.

Material & Labour for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

Material & Labour for Cutting openings, through brick walls build in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exceeding 50m, complete all as specified & dircted.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work build in cement mortar, complete all as specified & directed.

Material & Labour for 20mm thk Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) us?ing marble dust with admixture of pigment to match with shade of granite. complete all as specified.

Material & Labour forr flat form work for fair finished surfaces to soffits of suspended slabs such as roof slabs , floor slabs, landings and similar work; not exceeding 200mm thick (horizantal or sloping), all as specified and directed.

Material & Labour for 2nd claas hard wood plain fillets square/ rectangular or triangular in section, clean sawn secured with nails or brads sectional area exceeding 13 & not exceeding 25 sqcm complete all as specified & directed.

Material & Labour for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, all as specified and directed.

Supply & Fixing 35 mm thick ,IInd class hard wood, glazed and skelton shutters ;open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded; fitted with mitred beads for securing glass wtc; size of members as specified in SSR part-I section 8, clause 8.24(a), all as specified and directed.

Supply & Fixing Factory made solid PVC Moulded door shutter with wood EPS, 30mm thick , with 2,4, or 6 raised panel design with 2mm thick moulded prelaminated PVC Sheet on both faces supplying & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed.

Supply & Fixing 35mm thick IInd class hard wood ,Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed.

Supply & Fixing 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match, Supply & Fixing

Taking down chowkhats or frames with shutter (with out taking off the shutters from the frames) size not exceeding 1.50 Sqm each and all as specified and directed.

Taking down chowkhats or frames with shutter (with out taking off the shutters from the frames) size exceeding 1.50 Sqm but not exceeding 4 Sqm each, all as specified and directed.

Supply & Fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suplying and fixing in opening as per specification and drawing etc complete all as specified & directed.

Spply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof SS wire mesh (Two nos glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116x45mm & sash 46x62mm both having wall thickness of 2.3+ 0.2mm and single glazing bead/double glazing bead of appropriate dimension. ( Area of window above 1.75 sqm) comprising of uPVC multi chamfered frame, with inbuilt roller track and sash extruded profiles duly reiforced with 1.60+0.2mm thick galvanised mild steel section made from roll forming process of required length ( shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC exruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (Weight bearing capacity to be 40kg), GI fastners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fuson welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame , the gap between frameand adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and approved quality , complete all as specified and directed. (Note - Glass or wire mesh shall be paid separately)

Spply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47x50mm mullion 47x68mm both having wall tickness of 1.9+ 0.2mm and single glazing bead of appropriate dimension. ( Area upto 0.75 sqm) comprising of uPVC multi chamfered frame,and mullion (where ever required) extruded profiles duly reiforced with 1.60+0.2mm thick galvanised mild steel section made from roll forming process of required length ( shape and size according to uPVC profile), uPVC extruded beads of appropriate dimension of EPDM gasket, GI fastners 100 x 8mm size for fixing frame to finished wall, plasyic packers, plastic caps and necessary stainless steel screws etc. profile of frame shall be mitred cut and fuson welded at all corners,mulion (if required) shall be also fusion welded including drilling of holes for fixing of hardwares and drainage of water etc. After fixing frame , the gap between frameand adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and approved quality , complete all as per approved drawing & as directed (Note - Glass or wire mesh shall be paid separately)

Supply & Fixing 100 mm long Aluminium anodised barrel towers bolts of extruded section, all as specified and directed

Supply & Fixing 150 mm long Aluminium anodised barrel towers bolts of extruded section, all as specified and directed

Supply & Fixing brass Locks, cupboard, grade I, size 50 mm, complete all as specified and directed.

Supply & Fixing 75 mm long butt hinges, type C-22 extruded aluminium anodised with brass hinge pin, anodised and fixed and all as specified and directed

Supply & Fixing 100 mm long butt hinges, type C-22 extruded aluminium anodised with brass hinge pin, anodised and fixed and all as specified and directed

Supply & Fixing 100 mm extruded aluminium alloy handles, fabricated type anodised all as specified and directed

Supply & Fixing 150 mm extruded aluminium alloy handles, fabricated type anodised all as specified and directed

Supply & Fixing 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, all as specified and directed

Supply & Fixing 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, all as specified and directed

Supply & Fixing in repair Continuous (piano) hinges,brass 40mm width of flaps (when open), complete all as specified and directed.

Supply & Fixing in repair 100mm extruded brass handles, fabricated type polished, complete all as specified and directed.

Supply & Fixing Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in, complete all as specified and directed.

Supply only stainless steel wire cloth 00.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless stell wire staples, complete all specified and directed.

Supply & Fixing in repair stainless steel wire cloth 00.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless stell wire staples, complete all as specified and directed.

Material & Labour for Fabrication & fitting of modular kitchen with cabinet & wardrobe/ cupboard made out of 18 mm thick PVC board plain sheet including providing cabinet for keeping baskets/ cutlery basket with handles complete all as specified and directed.(Make : Rajshree or equivalent all as specified and approved by Engr in Charge) Note : Modular Kit accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only

Supply only Stainless steel basket (plain) of size 50cmx37cmx10cm made of 4mm th Stainless Steel.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and directed.

Supply only Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and directed.

Supply only Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and directed.

Supply only Stainless steel Partition basket of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and directed.

Supply only Stainless steel Cutlary basket of size 50cmx37cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and directed.

Supply only Stainless steel basket (plain) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and directed.

Supply only Stainless steel bottol full out of size 50cmx40cmx16cm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and directed.

Supply only Stainless steel basket (plain) of size 50cmx52cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and directed.

Supply only Stainless steel grid basket (plain) of size 50cmx52cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and directed.

Supply only Telescope basket (channel) 18'/20' length extruded MS galvanised over rollers,complete all as specified and directed.

Supply only Door closer magnet of size 3 (55mm X 29 mm), complete all as specified and directed.

Supply only Autocut Hydrolic stainless steel hinges of size 120mm X 60 mm, complete all as specified and directed.

150 mm dia oval shape brass handle fancy type polished bright finish, complete all as specified and directed.

Supply only Continuous (piano) hinges,brass, 30 mm width of flaps (when open) bright finish or electrod galvanised complete all as specified.

Material & Labour for framed work such as grills ,grating etc with ends of bars shouldered or riveted, or forged into spikes conforming to Fe 290-Gde -E-165, complete all as specified and directed.

Material & Labour for Mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia or securing with clips all as specified and directed.

Material & Labour for 6mm to 8mm diaTMT bars cut to legth, bent to shape required including cranking bending spirally for hooping for slab for manhole etc complete all as directed.

Removal of Plants/ Shrubs grown on walls/ slabs/beams by making holes or demolition of concrete etc and including applying suitable chemical for killing the roots of Plants, filling of holes with concrete and making good complete all as specified and directed.

Chipping/removing loose concrete in cloumns/beams/ chajjas/roof slab etc. up to reinforcement bars without damaging the reinforcement, removing all the loose material and to make all the exposed surface free from dust and all impurities etc complete all specified and directed.

Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution Reebaklens RR of Fosroc / Sika Rust off 100 / equivalent in bostic India Ltd by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying anti corrosive coating to reinforcement Nitozinc primer of Fosroc/Sika Friazinc R / equivalent in Bostic india Ltd , all as recommended by product manufacturer.

Providing and applying one coat of structural grade epoxy coat by brush of approved make . Mixing of two components will be as directed by manufacturer .Application shall be provided not more than 5 hours before application of micro concrete / polymer mortar etc complete all as specified by the manufacturer. (Make :- Nitobond EP of FOSROCK/ Sikdur 32LP/ equivalent in Bostic India Ltd)

Providing and applying n exc 40 mm thick (In layers of each 10mm thick) Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar Renderoc SP 40 of Fosroc / Sika plastocrete plus/ equivalent in bostic India ltd, mixed with water in a water & powder ratio 0.18 in ceiling of roof slab / Chajjas / Beams / Parapet walls etc . Note:- Quoted tate is deemed to be inclusive of provideing scaffolding for working in patches upto a height of 15 Mtr complete all as specified and directed.

Taking down existing roof treatment including clay tiles, screed bed, APP membrane etc top of roof slab and cleaning with wire brushe and washing with water complete , including removal and dispose off the debris all as specified and directed.

Supply and application of 5 layer SHR waterproofing coating system as per manufacturer application procedure on leaking concrete roof surfaces by through surface preparation with high pressure water jet min 125, bars opening the cracks followed by one absorption coat of nano tech enhanced elastomeric waterproofing (NEEWP) emulision having UV resistance and min 50% solid filling and sealing the cracks then over coating with 2 coats of NEEWP+cement mixture as waterproofing coat having +450% elongation . The surfaces is then to be tested for water tightness with ponding test for min 48 hrs and then coated with 2 coats of SHR coating pure acrlic based, UV resistant non yellowing, bioorganism resistance (anti fungal, anti bacterial) conforming to BIS STD is 17218:2019 with pull of adhension 2.8 MPA, passed 2000 Hrs acclerated durability test suitable for all type of cementitious surfacs, white colour, matt,surface coverage 2.35 sqm/ltr/2 coats, DFT 100-120 microns using brush,roller, airless spray gun as applicable, complete all as specified and directed. Note - The application is to be done by autorised applicator of manufacturer.

Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screw, complete all as specified and directed.

Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in cement mortar 1:6 mixed with water proofing compound and jointed pointed in cement mortar 1:3 mixed with 5% crude oil by weight of cement, complete all as specified and directed.

Material & Labour for 12mm veneered decorative plywood, grade I with decorative face veneers on both faces, all as specified and directed.

Material & Labour for 18/19mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

Material & Labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all and as specified & directed.

Material & Labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all and as specified & directed.

Material & Labour for Machine cut cudappah stone ( Sadarahalli Stone) slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Material & Labour for Providing Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations, complete all as specified as directed.

Material & Labour 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection in alternative bay and surface finish even and smooth with out using extra cement, complete all specified and directed.

Material & Labour for Cement concrete 1:2:4 type B-1 (20mm graded aggregate) 40mm thick for sub base of floors complete all as specified and directed.

Material & Labour for plain cement concrete 75 mm thick of 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in levelling course of sub floors, sub-base, floors and paving etc., complete all as specified and directed.

Material & Labour for dark shade/Double charged/ultra charged vetrified ceramic tiles 10mm thick (Square/rectangular) Polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified as directed.

Material & Labour for dark shade/Double charged/ultra charged vetrified ceramic tiles 10mm thick (Square/rectangular) Polished, area of each tiles not exceeding 0.36 sqm, invertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified as directed.

Material & Labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but exceeding 0.11 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed.

Material & Labour for Glazed coloured ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortor bedding but not backing to stone and rubbish off the premises complete all as specified & directed.

Material & Labour for Providing and laying Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Supply & Fix heavy duty parking tiles 300 x300 x 15mm, laid and and jointed complete all as specified and directed. (Make : Johnson endura(tactile series) or equivalent in make - Somany / Kajaria)

Material & Labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces with cement mortar 1:4 as in backing coat of skirting /dado all as specified and directed.

Material & Labour for Screed bed or bedding layer of mortor 20 mm thick in cement mortar 1:4 for laying floor finishes, complete all as specified and directed.

Material & Labour for Rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement. all as specified and directed. (Note: Water proofing compound shall be measured and paid separately)

Material & Labour for Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement. all as specified and directed.

Material & Labour for 5mm thick Rendering in cement mortar 1:3, on fair faces of brick work or concrete surfaces on ceiling, complete all as specified & dircted.

Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc complete all as specified & directed.

Material & Labour for prepation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over over a coat of primer over 3mm thick wall care putty on wall all as specified and as directed.

Complete removal of existing treatment on old decorated surfaces of wall and applying two coats of distemper oil emulsion over primer over 3mm thick wall care putty including preparation of wall, all as specified & directed.

Material & Labour for preparation of newly plastered surfaces and applying three coats of white wash on ceiling surface, complete all as specified & dircted.

Material & Labour for Complete removal of existing treatment on old decorated surfaces of celling and applying three coats of white wash on ceiling surface, complete all as specified & dircted.

Material & Labour for prepaeation newly plastered of wall surfaces and applying two coats of acrylic smooth exterior paint of required shade (applied @ 1.67ltr/10 Sqm) over and including priming coat of exterior primer @2.20 Kg/10 Sqm) all as specified & directed.

Complete removal of existing treatment on wall surfaces and applying two coats of acrylic smooth exterior paint of required shade (applied @ 1.67ltr / 10 Sqm) over and including priming coat of exterior primer @2.20 Kg / 10 Sqm) all as specified and as directed directed.

Material & Labour for Complete removal of existing treatment on old decorated surfaces of wall and applying three coats of white wash on wall.surface all as specified & directed.

Material & Labour for prepation of newly plastered wall surfaces and applying three coats of white wash on wall, all as specified and as directed .

Material & Labour for prepation of new plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed directed.

Complete removal of existing treatment on wall surfaces and applying two coats cement base paint over a coat of primer complete all as specified and as directed.

Demolition of Concrete cement (reinforcement) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.

Supply only 4mm sheet glass, ordinary quality, sheet glass is ground or obscured or frosted, on one side , not exceeding 0.5 Sqm in each glass, complete all as specified and directed.

Supply only 4mm sheet glass, ordinary quality, exceeding 0.5 Sqm in each glass, all as specified and directed.

Material & Labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new Surfaces plain or moulded, not exceeding 10cm width or girth steel surfaces, all as specified and directed.

Material & Labour for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces, all as specified and directed.

Material & Labour for applying one coat of synthetic enamel paint preparation of old wooden surfaces, all as specified and directed.

Supply & fixing in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, but exceeding 0.5 Sqm each, complete all as specified and directed.

Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 20mm bore, complete all as specified and directed.

Supply & fixing Unplasticised PVC of 20mm dia pipes of pressure rating 10 kgf / cm2 fixed complete to walls, ceilings or in floors etc., any type, complete all as specified & directed.

Supply & fixing Unplasticised PVC of 25mm dia pipes of pressure rating 10 kgf / cm2 fixed complete to walls, ceilings or in floors etc., any type, complete all as specified.

Supply & fixing Supplying and laying of CPVC pipes of 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Dismantling HDPE water tanks 500 ltr capacity and removing to store, complete all as specified and directed.

Supply & fixing moulded polyethylene 1000 ltr water tank storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply & fixing in repairs 25 mm Ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply & fixing PVC (SWR) pipes single sockted in any length with rubber ring joints laid fixed to walls 100 mm bore as in rain water pipe,complete all as specified & directed.

Supply & fixing in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.complete all as per specified and as directed.

Supply & fixing in repairs Vitreous China valveless, syphonic action type, flushing cistern, 10ltr capacity low level, white, with inlet, ball valve, float and handle including bracketsand flush pipe etc complete all as specified and as direted.

Supply & fixing in repairs 20mm bore Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as direted.

Supply & fixing in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

Supply & fixing in repair Vitreous China wash basin, white, flat back, size 630 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specifed and directed.

Supply & fixing 20mm bore single lever wall mixer all as per Model No : OPP-15117PM of Make - Jaquar (or equivalent in other makes) with provision for over head shower with 115mm long bend pipe on upper side, connecting legs & wall flanges and fixed including taking down of existing one, complete all as per specified & directed.

Supply & fixing in repairs 20 mm bore Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe, complete all as per specified & directed.

Supply & fixing 20mm bore two way Bib taps, brass chromium plated fancy type with wall flange screwed down all as per Model No :OPP 15041PM of Make - Jaquar (or equivalent in other makes), screwed for iron pipe or for brass ferrule including taking down of existing one, complete all as per specified.

Supply & fixing 20mm bore Single lever basin mixer without popup, brass chromium plated fancy type with wall flange screwed down all as per Model No - OPP 15011BPM of Make - Jaquar (or equivalent in other makes), screwed for iron pipe or for brass ferrule including taking down of existing one, complete all as per specified & directed.

Supply & fixing PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as per specified & directed.

Supply & fixing in repairs 20 mm bore chromium plated fency type stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions, complete all as per specified & directed.

Supply & fixing in repairs 20 mm bore chromium plated fency type stop valves, (concelled type) cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions, complete all as per specified & directed.

Supply & fixing in repairs 125mm dia shower rose brass chromium plated with or without seivel joints, including fixing to steel pipe or union complete all as specified and directed.

Supply & fixing 20 mm bore brass chromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length all as per Model No - ALD-565 of Make - Jaquar (or equivalent in other makes) as directed fixed to pipe. including taking down of existing one complete all as per specified .

Supply & fixing stainless steel towel rack with lower hanger & hook all as per Model No - AHS-1581H of Make - Jaquar or equivalent including taking down of existing one, complete all as per specified & directed.

Supply & fixing stainless steel towel ring square all as per Model No : AKP- 35721P of Make - Jaquar (or equivalent in other makes) complete all as per specified & directed.

Supply & fixing in repairs towel rail 60cm long of aluminuim anodised fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 190 gms), complete all as per specified & directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and raling 60 cm long complete all as specified and directed

Supply & fixing in repair soap dish (poly carbonate) all as per Model No : AQN-7733 Make - Jaquar (or equivalent in other makes) including taking down of existing one, complete all as per specified and as directed.

Material & Labour for 75mm dia for PVC (SWR) multi floor trap of with grating including jointing with solvent cement, complete all as per specified and as directed.

Material & Labour for 125/110mm dia PVC (SWR) gully trap includingsetting jointing with solvent cement etc, complete all as per specified and as directed.

Supply & fixing in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.

Supply & fixing in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints laid in trenches or floor, complete all as specified and directed.

Supply & fixing 110mm radius PVC (SWR) bends complete all as specified and directed.

Supply & fixing 110mm radius PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Supply & fixing 110mm radius PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

Supply & fixing in repairs 75mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.

Supply & fixing in repairs 75mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints laid with clamp complete all as specified and directed.

Supply & fixing 75mm radius PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Supply & fixing 75mm radius PVC (SWR) branch piece,double (double Y) equal or unequal, complete all as specified and directed.

Supply & fixing 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Supply & fixing 75 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Supply & fixing of 1.5mtr long pull it pulley system operated cloths drying system consisting consisting of chormiun plated pipe of outer dia 22mm, inner dia 19.80mm, ( 05 pipes) fixing to ceilling as specified and directed (Make : Easy dry or equivalent)

Supply & fixing 25 mm dia aluminium drapery rod with wooden finish, decorative, , including brackets, decorative finish at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed.

Disconnecting existings HDPE water tank 500 Ltr capacity , setting a side (or lowering if required) for repairs, claening, etc. and hoisting if required reconnecting and refixing in position, complete all as specified and directed. (Note - Cleaning repairings, etc. measured sepaeately).

Cleaning and removing all scale and dirt etc, from HDPE tank 500 ltr capacity and from mouths of circulating pipes, complete all as specified and directed.

Concrete bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregates, complete all as specified and directed.

Supply & Fixing Reinforced conctrete 150mm bore of pipes class NP2, laid and jointed complete with collars all as specified and directed.

Supplyng and laying of CPVC pipes outer diameter 50 mm SDR 11 & plain CPVC SDR 11 fitting, such as union, elbow, socket, reducer, tee etc fixing on wall / ceiling orlaid in floors / trenches, complete all as specified and directed.

Supplyng and laying of CPVC pipes outer diameter 25 mm SDR 11 & plain CPVC SDR 11 fitting, such as union, elbow, socket, reducer, tee etc fixing on wall / ceiling or laid in floors / trenches, complete all as specified and directed.

Supply & Fixing CPVC ball valve 50 mm for CPVC pipe SDR 11 complete all as specified and directed.

Supply & Fixing CPVC ball valve 25 mm for CPVC pipe SDR 11 complete all as specified and directed.

Material & Labour for cutting and screwing existing pipes 40 to 50 mm for alterations or additions and making connection / inserting suitable size tee and sockets for branch connection from main water line or lengthening screw on pipe to form connector, complete all as specified and directed.

Taking down old unserviceable point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings etc. and making good disturbed surface of walls floors etc, complete all as specified and directed.

Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces, complete all as specified and directed.

Taking down Ceiling fan sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces, complete all as specified and as directed.

Refixing only Ceiling fan with and including carrying out cleaning servicing, oiling and greasing of ceiling fans and connecting up including provision of cable from celling rose/ connector to fan, all as specified and as directed.

Material & Labour for painting of Ceiling fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc, all as specified and as directed.

Taking down exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces, complete all as specified and as directed.

Refixing only exhaust fan ( In Repair) and connecting up including provision of cable from celling rose/ connector to fan, all as specified and as directed.

Material & Labour for one coat of painting of exhaust fan complete, in situ with synthetic enamal paint by spraying including filling cavities with filler & cleaning all dust etc, all as specified and as directed.

Disconnecting electric connection and taking down main switch/SPN DB/TPN DB of any size and making good / levelling the disturbed surfaces of wall to match with existing surface, all as specified and as directed.

Material & Labour for concealed Point wiring for one light/bell point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately.

M&L for concealed Point wiring for one ceiling/exhaust fan point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately.

Material & Labour for concealed Point wiring for one light point controlled by two 2 way swithch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately.

Material & Labour for concealed Point wiring for one 05 Amps socket outlet point on same board complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately.

Material & Labour for concealed Point wiring for one switch socket outlet point 5 Amps on independent board complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately.

Material & Labour for concealed Point wiring for one 3 pin socket outlet, 15 Amps on independent board complete with 2.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately.

Material & Labour for concealed Point wiring for one light/bell point controlled by one, one way switch complete with 4 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately.

Supply & Fixing Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

Supply & Fixing Switch Modular 6A single pole, two way, 1 module complete all as specified and as directed.

Supply & Fixing Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed.

Supply & Fixing Modular Modular Bell Push 6A 1 Module complete all as specified and as directed.

Supply & Fixing Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply & Fixing socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed.

Supply & Fixing Modular fan regulator step type 120 W, 2 module complete all as specified and as directed.

Supply and fixing LED lights fitting 1 x 18/ 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED luminaire roud/squre shape 15 watts 220 V AC surface/recessed type with hight efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for foof ceiling/surface including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED street light fitting 35 watt 230 V AC outdoort type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including necessary mounting bracket with nut bolts and mounting on wall or roof etc including taking down unserviceable fitting, all as specified and as directed.

Supply & Fixing Call Bell Ding Dong AC 230 V single pole including connecting up with flexible copperconductor cable of suitable size, all as specified and as directed.

Supply and fix MCB DB, TPN, 4 ways, Double door, 415 volt, isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete all as specified and as directed.

Supply and fix MCB DB, vetical MCCB as a incommer TPN, 8 ways, Double door, 415 volt, isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete all as specified and as directed.

Supply and fix MCB DB, SPN, 12 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete all as specified and as directed.

Supply and fix MCB DB, SPN, 4 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete all as specified and as directed.

Supply and fix MCCB 415 volts 16 KA four pole suitable for vertical TPN of capacity 125 amps including taking down unserviceable MCCB, complete all as specified and as directed.

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete, complete all as specified and as directed.

Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete all as specified and as directed.

Supply and fixing TPN/FP 40 to 63 Amp rating 415 V, 10 KA 'B' curve miniature circuit breaker (MCB) complete all as specified and as directed.

Supply and fixing DP / TP40 to 63 Amp rating 415 V, 10 KA 'B' curve miniature circuit breaker (MCB) complete.

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals, complete all as specified and as directed.

Supply and install test and commissioning of autoclean kitchen chimney with baffle filter, auto clean alarm, touch and gsture control, I clean technology for notifiction of cleaning, built LED light on hood (Hood primus plus energy BK90) of size 90 cmm and 1500 Cum per hour range with necessary ducting upto the wall of kitchen suitable to exhaust the somke in kitchen premises suitable for modular kitchen, complete all as specified and as directed. (Make - Faber / Elica / Hindware )

Supply and laying PVC non metalic conduit including tees, bends, elbows, reducers, and fixing accessaries etc for telephone/TV connection of size 20 mm dia, complete all as specified and as directed. Note (i) Cutting chases will be Measured and paid seperately (ii) TV/Telephone cable provide by user section .

Supply and fixing PVC non metalic junction boxes one to four way for telephone/TV connection of size 20 mm dia, complete all as specified and as directed.

Supply and fix modular telphone socket RJ 11 one module including taking down unserviceable socket, complete all as specified and as directed.

Supply and fix modular TV coaial socket one module including taking down unserviceable socket, complete all as specified and as directed.

Supply and fix pre wired powerunit with 20 amps mimi MCB and plug top for AC including taking down unserviceable socket, complete all as specified and as directed.

Material & Labour for earthing complete with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth lead 4 mm wire by means of bolts, nuts, check nuts/bracing and washers all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, with flush type handle with 16mm dia round bars and 15 mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion.

Material & Labour for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall / Ceiling etc , complete all as specified and as directed. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

Material & Labour for concealed Sub main wiring by making recess in wall/surface complete with 4 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc, complete all as specified and as directed. Note :- 4 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

Material & Labour for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc, complete all as specified and as directed. Note :- 2 runs of 4 sqmm, + 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels and cutting chases for concealed water tubing or concealed conduit wiring and making good, cutting not exceeding 10 cm girth, complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc, complete all as specified & dircted.

Demolition of brick work built in cement mortar or cement lime mortar, complete all as specified and directed.

Demolition of (Unreinforcement) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified as directed.

Demolition of (reinforcement) Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Demolition and breaking up 150mm dia drain pipes ( salt glazed ware, AC or reinforced Concrete ) set in cement mortar, complete all as specified and directed.

Removal of debris/building material out side the campus including loading and unloading, etc to a distance exc 5Km but n exc 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement.

RAVI ENTERPRISE (BID ID -3392252)

KUMAR AGENCIES (BID ID -3392374)

Neptune Engineers and Builders (BID ID -3390289)

S.RAMACHANDRAN (BID ID -3392480)

GMS Builders (BID ID -3392685)

K. VENKATESH NAIDU (BID ID -3391391)

p.chinnasamy (BID ID -3391971)

m/s prabakaran (BID ID -3391876)

Krishna Engineering (BID ID -3392011)

Vishnu Infrastructures (BID ID -3391364)

KRISHNA ENTERPRISES (BID ID -3392111)