Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 CrAccepted-AOC NO 4 343 2 KAMARAJ NAGAR CHETTIKARAI POST DHARMAPURI DISTRICT 636 702 | 636702 | ₹2.3 Cr | L1 | Accepted-AOC The lowest and negotiated tenderer |
| 2 | L2₹2.3 Cr+₹4.0 L (1.77%)Rejected-AOC NO 250 2 R T NAGAR EAST 2ND CROSS REDDIYUR ALAGAPURAM SALEM 636004 | SALEM | TAMIL NADU | 636004 | ₹2.3 Cr+₹4.0 L (1.77%) | L2 | Rejected-AOC Unsuccessful tenderer |
| 3 | L3₹2.3 Cr+₹4.0 L (1.78%)Rejected-AOC CHENNAI | CHENNAI | CHENNAI | TAMIL NADU | ₹2.3 Cr+₹4.0 L (1.78%) | L3 | Rejected-AOC Unsuccessful tenderer |
| 4 | L4₹2.3 Cr+₹4.1 L (1.79%)Rejected-AOC NO 2 15 SANTHIYUR ATTAYAMPATTI POST MALLUR VIA SALEM DISTRICT 636 203 | NAMAKKAL | TAMIL NADU | 636203 | ₹2.3 Cr+₹4.1 L (1.79%) | L4 | Rejected-AOC Unsuccessful tenderer |
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
11 Aug 2023, 6:00 pmClosed
The Superintending Engineer/TNPHCL/NC/Salem
The Superintending Engineer/TNPHCL/North Circle, No.1 and 7, Inspectors quarters, PGR Line, Behind CPO Building, Annadhanapatty, Linemedu, Salem 636 006.
Renovation works to the existing Avvaiyar Government Girls Higher Secondary School at Dharmapuri in Dharmapuri District for the establishment of school of excellence in the academic year 2022 2023.
2023_TNPHC_353251_1
SE/NC/DB/512/2023
Open Tender
Civil Works
Lump-sum
180 days
Dharmapuri in Dharmapuri District
Refer the tender documents
7 documents required · 7 mandatory
₹0
₹1.5 L
5 Sept 2023
1 Aug 2023
14 Aug 2023
1 Aug 2023
11 Aug 2023
1 Aug 2023
Amount
1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.
2.6: Supply and Filling of 40mm HBSJ
2.7: Supply and Filling of 20mm HBSJ
31 : Weathering course
39 : M.s Grills
41 : Painting - New "iron work"
47 : S & F Alu Towel rail 75 cm long
WATER SUPPLY ARRANGEMENTS 51.2: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres (excluding free board) of approved brand (superior variety) with ISI Mark
Electrical arrangements 69 : 15 Amp. Power plug
74 : Charges for fixing of "Fan"
112 : S & F of Exhaust Fan 300 mm dia
ANNEXURE-I 2.1.3 : Filling crushed stone sand
3.1.1: C.C.1:5:10 for Foundation & Basement (using crushed stone sand)
3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)
6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture
9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture a. In Ground Floor
c. In Second Floor
14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) b. In Ground floor
21.5.2 : Supply and fixing Solid UPVC door shutter with frame
22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.
23.2.1 : Supplying and fixing of 4 mm thick pin headed Glass Panels with aluminium anodized U shape beeding or size 12x12 mm with 107 gram in average weight for 1 m length with aluminium bolts and nuts
28.1 : Plastering the top of flooring in C.M. 1:4, 20 mm tk. (using crushed stone sand)
29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)
29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)
32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%
33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer
38.7 : Plastic Emulsion PAINT including primer for outer walls
43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.
44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe
53.5.2 : Wash Hand Basin of size 550 x 400 mm (white with pedestal)
54.1.1 : S & F of 15mm dia half turn CP long body tap
54.2.1 : S & F of 15mm dia half turn CP short body tap
56.1: S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.
58.3: Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,
b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,
60.1 : PVC Nahani trap (4way/2way)
61.3: Supplying laying and jointing the following dia UPVC non pressure pipes SN8 SDR 34 (S16.5) as per IS 15328/2003. a) 110 mm dia UPVC pipe Below G.L
b) 160 mm dia UPVC pipe Below G.L
67.1: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.
75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer
211: Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry and racking out joints to 20mm deep without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant and necessary scaffolding if necessary etc., all complete in all respect and as directed by the departmental officers.
241: Dismantling the existing damaged brick works of cement mortar in all floors without affecting the adjacent structures, including the cost of required tools and plants and clearing the debris away from the site including cost of loading, unloading & vehicle hire charges etc., all complete in all respect and as directed by the departmental officers. a) Upto 3.00m height
243: Dismantling the existing floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant etc., all complete in all respect and as directed by the departmental officers.
361.1 : Concrete designer tiles flooring (using crushed stone sand)
361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)
ANNEXURE-II A1 : Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm x 58mm
A2: Supplying anf fixing of Vertical blinds Premium including fixing charges etc., all complete and as directed by the departmental officers.
A3: Supplying and fixing in position of LCD Projector 3300 Ansi Lumens Short Throw Projector, WXGA (1280 X 800) Resolution, Contrast Ratio: 3000:1, including cost of material and installation charges etc., all complete and as directed by the departmental officers.
A4: Supplying and Installation of 10’ x 8’ Motorized Screen including cost of material and installation charges etc., all complete and as directed by the departmental officers.
A5: Supplying and fixing of 3 Feet Ceiling Mount Kit, Make: Liberty including cost of material and installation charges etc., all complete and as directed by the departmental officers.
A6: Supplying and installation of 20 Metre HDMI Cable with ISI mark including cost of material and labour charges etc., all complete and as directed by the departmental officers.
A7: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (open wiring) a. Light Point with ceiling rose.
b. Light Point without ceiling rose.
A8: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(open Wiring)
A9: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. (open Wiring)
A10: Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open Wiring).
A11: Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open Wiring).
A12: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing
A13: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb
A14: Supplying and fixing of 25W LED street light with necessary fittings
A15: Cleaning the existing septic tank such as sewage waste and liquid using 6000 litres capacity tank vehicles and disposing the same away from the site including hire and conveyance charges for the vehicle, labours all tools and plants employed there of as directed by the departmental officers.
A16: White washing 2 coats for old walls (slaked)
A17: Painting two coats of OBD for old walls
A18: Painting two coats of old walls with ready mixed plastic emulsion paint
A19: Painting the old iron work with two coats of approved makr of Epoxy paint
A20: Painting the old wood work with two coats of approved 1st class snthetic enamle paint
A21: Water proofing Treatment for terrace flooring: Terrace water proofing work: The existing pressed tiles surface to cleaning water wash using with wire brush, the tiles joints are rack out using machine without damaging the existing structure and clean the joint. Fosroc chemical, Nito bond SBR add with water ratio of 1:1 apply in the joints then Nito bond SBR add with cement, sand, water and red oxide for the ratio of 1:1:1:1/2 after fosroc brand or equalent chemical roof guard add with water for the ratio of 4:1 applying top of surfaces. After 24 hours another second coat applying the all process completed water stagnant of 48 hours for treated place any damages to ensure slab to all complete and as directed by the departmental officers.
A22: supplying and laying of rajasthan kota stone, 20mm thick of approved quality for flooring in CM 1:3 (One of Cement and three of crushed stone sand) 20mm tk and other similar works including polishing rubbing and fixing in position cutting pointing the joint coloured cement pigment with cement slurry curing etc completed in all respects for all floors as directed by the departmental officers ( Quality of rajastan kota stone and colour shall be got approved by the Executive Engineer before use)
A23: Removing the partially damaged asbestos gutter and AC sheet roofing without roof timber including all accessories without affecting the adjacent structures including the hire charges for tools and plants and scaffolding if any and clearing the dismantled materials away from the site etc., all complete and as directed by the departmental officers.
A24: Supply and fixing of Galvanium sheet 0.47mm thick., etc complete in all floors and as directed by the departmental officers.
A25: Dismantling Pantile or Mangalore Tiled roof without roof Timbers including the cost of required tools and plants and stacking the tiles for reuse and clearing the debris away from the site etc., all complete in all respect and as directed by the departmental officers.
A26: Supplying and fixing of cement particle board 12mm tk density not less than 1000/m³ using 25x40mm MS tube including necessary screws , labour charges, lifting charges etc.., all complete.
A27: Supplying & Fixing approved Manglore Roofing Tiles over Steel framework all necessary fixtures, nails, screws for fixing tile including all lead & lift and necessary arrangement for fixing tiles such as scaffolding, cleaning etc. all complete
A28: Refixing of Manglore Roofing Tiles over Steel framework all necessary fixtures, nails, screws for fixing tile including all lead & lift and necessary arrangement for fixing tiles such as scaffolding, cleaning etc. all complete
A29: Supplying and delivery and fixing of Wet type lubricated open well submersible pumpset as per ISI specification. The pumpset is suitable for AC single phase electric power etc., Motor : 2 HP, 1.1 Kw/SSM 1130, 276/114 lpm
A30: Supply and fixing of MS fabricated DOL starter single phase panel control board of wall mounting type with ISI mark with volt meter, ammeter indicating lamps ON/OFF push button for openwell. 2HP with necessary connections and three phase cum dry run preventer, etc., for 2.00HP open well submersible pumpset
A31: Supplying and fixing of 3 core 4 sq.mm PVC flat cable of approved quality of ISI Mark covering with PVC pipe including cutting the pipes wherever necessary and jointing with solvent cement including earth work excavation, filling sand for laying the pipes, cables and cushion for protection of cable, refilling the trenches after the pipes are laid underground etc., all complete and as directed by the departmental officers.
A32: Labour charges for the erection of open well submersible pumpset for sump in 2.00 HP including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps,etc.,
A33: Supplying and fixing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance. (Schedule-40) (Below ground level) including earth work excavation and refilling etc., a) 25mm dia UPVC pipe (PVC) 10kg/cm²
b) 25 mm dia UPVC Elbow
c) 25mm dia UPVC Tee
d) 25mm dia UPVC bend
e) 25mm dia UPVC Coupling
f) 25mm x 20mm dia UPVC reducer
g) 25mm UPVC FTA
h) 25mm UPVC MTA
i) 25mm dia GM non return valve
j) 25mm dia HDPE hose 10kg with ISI mark
k) 25mm dia PVC foot valve
A34: Removing the damaged existing ceiling plastering and clearing the corroded reinforcement with wire brush and applying rust remover after applying one coat of zinc primer, Epoxy resin, styrene butadiene rubber.
A35: Dismantling Doors and Windows including removal of frames, hinges and fastenings etc., all complete and as directed by the departmental officer.
A36: Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters in position using 150mmx37.5mm styles and 6 Nos. of 150x37.5mm rails (Top, (intermediate and Lock rail) and 2 Nos. of 200mmx37.5mm rails (bottom rails) and 18.75mm thick planks for panels including cost and labour for fixing the Brass fittings such as 4 nos. of 200mm Brass door handle with brass screws, 10 nos. of 125x30mm Butt Hinges, 4 nos. 300x12mm Tower bolts, 1 no 300x16mm Aldrop, 2 nos. Rubber bush 40mmdia & 60mm long and 2 nos. aluminium door stopper etc., all complete and as directed by the departmental officers.
A37: Supply and fixing of 32mm dia PVC waste pipe and CP couplings with required gratings of best approved quality to the sink already fixed including the cost of all materials, labour for fixing etc., complete.
A38: Cleaning and Pointing the tiles joints with grout including cost of blade, grout etc., all complete and as directed by the departmental officers
A39: Supplying and laying of 63mm thick interlocking Paver block of best approved quality including cost of materials conveyance to site and labour charges for hydralic pressed fixing in position etc., all complete and as directed by the departmental officers
A40: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of teflon tape, special clamps, nails, etc., fixing on wall to the proper gradiant and alignment and redoing the chipped of masonry etc., as directed by the departmental officers. a) 50mm dia PVC pipe (PVC) 10kg/cm²
b) 50 mm dia PVC Elbow
c) 50mm dia PVC Tee
d) 50mm dia PVC bend
e) 50mm dia PVC Coupling
f) 50mm x 40mm dia PVC reducer
g) 40mm PVC FTA
h) 40mm PVC MTA
i) 32mm dia ball valve
A41: Supplying and fixing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance. (Schedule-40) (Above ground level) including cost of labour for fixing etc., a) 25mm dia UPVC pipe (PVC) 10kg/cm²
b) 25 mm dia UPVC Elbow
c) 25mm dia UPVC Tee
d)25mm dia UPVC bend
e) 25mm dia UPVC ball value
A42: Providing PVC stickar foam board for all room the rate includes cost of board labour for fixing etc., all complete and as directed by the departmental officers.
Prasath Constructions
A NARAYANAN
LGN CONSTRUCTION
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_421244.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .