SPL REPAIR / REPLACEMENT OF FURNITURE AGAINST SURVEY OFF UNDER GE (WEST), DELHI CANTT-10.

Amount

(Part-I) ( STEEL FURNITURE) Almirah Med Steel SHEET: CRCA sheet 1mm thick throughout as per IS specification. LOCK: 75mm Brass 6 lever lock of make : Harrison/ Godrej/ Plaza and 100 mm CP handle and fittings all as per godrej pattern. FINISH: All steel surfaces shall have two coats of paint over one coat of red oxide primer upto the satisfaction of Engineer-in-Charge in dual tone shade. Colour shall be as approved by GE. Legs: 1 mm thick CRCA sheet Legs shall be of 100mm height & 100 mm wide ends pluged with 1mm thick CRCA sheet as per dirn of Engr-in-Charge. Hinges : 75mm long hinges made of 2.5mm thick medium grade shall be provided. SHOES: Hard rubber shoes of appropriate size with thickness not less than 8mm shall be provided at bottom of both legs of Almirah. REST: All as shown in drawing(s) FD-1032 and directed by GE/ Engr-in-Charge.

Locker Steel SHEET: CRCA sheet 1mm thick shall be used throughout. All dimension shall be as shown on drg. Legs: 1mm thick CRCA sheet Legs shall be of 100mm height & 100 mm wide ends pluged with 1mm thick CRCA sheet as per dirn of Engr-in-Charge. Hanging Rod: Hanging Rod shall be 20 mm dia chromium plated steel conduit pipe 1.60mm thick with socket, nut & washer. FINISH: All Steel surfaces shall have two coats of paint over one coat of Red Oxide primer upto the satisfaction of engr-in-charge in dual tone shade. Colour as per shade approved by GE/ Engr-in-Charge. Hasp and staple: shall be stainless steel (SS) of size 75x40x3 mm and hinges 75mm long made of 2.5 mm thick medium grade shall be provided. These fixture shall be of best quality. Tower Bolt : 02 Nos of 75mm SS tower bolt shall be provided. Handle: Stainless Steel handle shall be of size 100mm. These fixture shall be of best quality. SHOES: Hard rubber shoes of appropriate size with thickness not less than 8mm shall be provided at bottom of both legs. Rest: All as shown on drawing(s) FD-257 and directed by GE/ Engr-in-Charge.

(Part-II) (WOODEN FURNITURE) BIN LINEN MULTIPURPOSE. PARTICLE BOARD: 18-19 mm thick pre-laminated particle board exterior grade in colour/shade as approved by GE. 2mm thick PVC edging of make Rehau/ Pegasus/ Kynex shall be fixed on open sides with strong bonded chemical adhesive through hot pressed machine. HANDLE: 100mm long SS handle shall be used for shutters and Drawers as directed by Engr-in-Charge/ GE. HINGES: Piano type hinges SS type grade 304 of appropriate size & best quality shall be used for shutter and magnetic catch holder on top corner as directed by Engr-in-Charge/ GE. Legs : 4 Nos teak wood legs of size 45x45mm & 100mm long and short of size 40x25x350mm & long rail of size 40x25x900mm duly fixed at base as per dirn of Engr-in-charge shall be provided. Best quality Nylon buffer/ shoes of appropriate size shall be fixed at legs. Telescopic Channel : 30mm (Zinc white coated) telescopic Channel of make Heppo/Earl Bihari/Hettich/ Zipco shall be used for drawer. POLISH: All exposed wooden surface shall be french polished with high glossy finish upto the satisfaction of Engr-in-Charge. REST: All as shown in drawing(s) FD/E6/MAP/09 and directed by GE/ Engr-in-Charge.

BOOK CASE TIMBER: All wood work shall be of first class seasoned teak wood. PARTICLE BOARD: 18-19 mm thick pre-laminated particle board exterior grade in colour/shade as approved by GE. 2mm thick PVC edging of make Rehau/ Pegasus/ Kynex shall be fixed on open sides with strong bonded chemical adhesive through hot pressed machine. PLYWOOD: Back side of the book case shall be of commercial ply wood 6mm thick BWR grade IS 303. HINGES: Piano type hinges SS type grade 304 of appropriate size & best quality shall be used for shutter and magnetic catch holder on top corner as directed by Engr-in-Charge/ GE. HANDLE: 100mm long SS handle shall be used for shutters. Shoes: Best quality Nylon buffer/ shoes of appropriate size shall be fixed at legs. REST: All as shown in drawing(s) FD-237 and directed by GE/ Engr-in-Charge.

CHAIR DINING TIMBER: All wood work shall be of first class seasoned teak wood. FOAM: Seat shall be 75mm thick 40 density foam covered with tapestry to covering the foam with white marking cloth of best quality as approved by GE/ Engr-in-Charge. PLYWOOD : Commercial plywood 12mm thick IS:303 BWR grade of appropriate size shall be provided SHOE: 20 mm dia. Nylon buffer/ shoes shall be provided at bottom of legs. POLISH: All exposed wooden surface shall be french polished with high glossy finish upto the satisfaction of Engr-in-Charge. REST: All as shown in drawing(s) FD/MAP-II/04 and directed by GE/ Engr-in-Charge.

SOFA SET FOUR SEATER WITH CUSHION (FOUR SINGLE SEATER) TIMBER: All wood work shall be of first class seasoned teak wood. CUSHION: Cushion shall be 100 mm thick foam, 40 density as approved by GE. COVER: Cushion shall be covered with tapestry cloth of first quality colour & shade as approved by GE/ Engr-in-Charge. POLISH: All exposed wooden surface shall be French polished with high glossy finish upto the satisfaction of Engr-in-Charge. REST: All as shown in drawing(s) FD-281 and directed by GE/ Engr-in-Charge.

Table Dining 6 Pers (1500x900x750) TIMBER: All wood work shall be of first class seasoned teak wood. TOP: 18-19 mm thick particle board exterior grade duly post-formed with 0.6mm thick laminate in colour/shade as approved by GE. 2mm thick PVC edging of make Rehau/ Pegasus/ Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine. STEEL : MS flat/ right angle shall be painted with two coats of black enamal paint and screwed with long rail and leg inner side for extra strngth. SHOE: Nylon buffer/ shoes of appropriate size shall be provided at bottom of legs. POLISH: All exposed wooden surface shall be french polished with high glossy finish upto the satisfaction of Engr-in-Charge. REST: All as shown in drawing(s) FD/MAP-II/03 and directed by GE/ Engr-in-Charge.

Capital Construction Company

Rana Construction Co

Jiwan Singh and Sons

ASHOKA FURNITURES

agarwal and company