Ward 18, Zone 03A Construction of road and footpath using Hot Mix from Gulmohar School Crossing to the Canal Embankment

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5m and lead upto 50m as per SOR 2.1.1

Providing and laying in position in C.C. specified grade excluding the cost of centering, shuttering All work upto plinth level 1:4:8 ( 1 cement: 4 Coarse sand zone III : 8 graded stone aggregate 40mm (nominal size)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density as per MORD specification 401

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to .30 kg per sqm on the prepared granual surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and Laying bituminous Macadem with higher capacity hot mix plant using crushed aggregates of specific grading premixed with bituminous binder transported to site, laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.

Providing and Laying bituminous Concrete with higher capacity batch type hot mix plant using crushed aggregates of specific grading, premixed with bituminous binder @ 5.40% of Mix and filler transporting the Hot Mix to work site, laying with a hydrostatic paver finisher with senser control to the required grade level and alignment, rolling with smooth wheeld vibratory and tendem rollers to acheive the desired construction as per MORT&H specification clause No.507 complete in all respects.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35, The finished surface to be level, uniform and free from streaks and holes.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802,804,805,806,807,1202 and 1204