GE/ALP (8362B) KOLKATA OF 2024-25

Amount

Dismantling removing all unsound concrete, plastered material by chipping/chiseling gently at all effected and adjoining areas of concrete etc till sound surface is reached all various locations in building subsequently cleaning the surfaces by hair brush and air blower and removing rubbish off the premises and disposing at the dumping site as approved by local authorities including hoisting assembling and fixing of double layer steel scaffolding to external perimeter of building complete all as specified and directed .

Removing of concrete all around reinforcement bar upto 12 mm dia and over from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiseling etc) and applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and cleaning the area thoroughly by water and allow it to dry and totally rust free of reinforcement bar all as complete as per manufacturer's instruction as specified .

Material , labour and preparation of existing reinforcement surface by brush and application of two component epoxy zincrich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre. complete all as specified .

Material and labour for introducing new reinforcement bars upto 12 mm dia and over for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified.

M & L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, column etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as specified and directed 60 mm average thickness of Column.

M & L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, column etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimum flextural strength 5N/mm2 @ 28days and complete all directed 40 mm average thickness of Beam/lintel

Supply, mixing and application two component structural grade polymer modified reinstatement morter, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as spd and directed upto 25 mm average thickness High. NOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand) with polymer admixed in proportions.

Use and waste of formwork to sides of column, pillars, posts, stanchions for rough foinished surface complete all as specified and as directed.

Use and waste of formwork to sides and soffit of beams, lintels, cantilevers, shelves etc for rough finished surface complete all as specified and as directed .

Material , labour for applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction complete all as specified.

S&F shear connector of 8mm dia & requisite length on the surface to be repaired for the bonding between old and new concrete as per the locations instructed by the Engr-in-Charge. The shear connectors shall be of L shape and welded with existing reinforcement at least 100mm in length @ 200mm c/c both horizontally and vertical followed by coat of epoxy Zinc primer as per the specification mentioned.

M&L for hoisting, assembly and fixing of double layer steel scaffolding to external perimeter of building duly cross braced and properly aligned for the functional aspect and safety of the building including dismantling, shifting & removal from site complete all as specified and as directed . Note: - Elevational area of the building shall be measured for payment of scaffolding.

Hacking out old broken glass any thickness, size quality or description from wooden/steel frame fixed with wooden beads/metal pinning complete all as specified and directed

S&F 4 mm thick plain sheet glass in square not exc. 0.50 sqm in each pane, fixed with pin headed beads or putty (in metal frames etc) complete all as specified and directed.

S&F in repair stainless steel wire cloth with stainless steel 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with wire staples (for windows and gauzed doors) all as specified and directed.

S&F in repairs Extruded aluminium alloy handles, fabricated type, anodised 125mm long.

S&F in repairs 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed.

S&F in repair 150mm long aluminium anodised barrel tower bolts of extruded section.

S&F in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F in repair stainless steel curtain rod anodised aluminium alloy 25 mm dia with pair of suitable brackets,finnels and also making good the wall surface to match the existing surfaces complete all as specified and directed.

S&F in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work complete all as specified and directed.

Taking down wooden/steel chowkhats/door/window frame including shutter (without taking off shutter) exc.1.5 Sqm but n exc 4 sq m each and removing to or from store complete all as spd & directed.

Taking down wooden/steel chowkhats/doo/window frame including shutter (without taking off shutter) not exc.1.5 Sqm each and removing to or from store complete all as spd & directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

M&L for preparation of new wooden surfaces of any description, not otherwise described oer 10cm width or girth and application of two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and complete all as specified and directed.

S&F 100mm MS Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed.

S&F 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed.

Supply and fix Aluminium anodised (powder coated) Three track sliding window frame with shutters with (2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers including aluminium deco grill size as specified with the following section of frame and shutter:- (A) Sections for shutter :- (i) "H' section 39 x 20 x 1.50 mm thick. (ii) 'Interlock' section 39 x 20x 1.50 mm thick. (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick. (B) Section for frame :- (i) Top & Sides 123 X 29.70X 1.50mm not less than 1.30 Kg /RM. (ii) Bottom 123 X 29.70 X 1.50mm not less than 1.502 Kg /RM and complete all as specified and directed.

S&F in repairs mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. .

M&L for suspended false ceilling system using metalic (E grid) exposed suspended system, grid section size 600mm x 600mm comprising of GI powder coated main runner of Dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/ 0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24 mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 6 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt- 0.007 Kg/clip) hold down clips (Wt - 0.0035 Kg/clip) with Provn of light fixture complete all as directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe etc. complete complete all as specified.

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia all as specified & directed.

S&F in repairs white Plastic water closet seat cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device

S&F CP tubular towel rail 600mm long 20 mm dai complete all as specified and directed.

S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Vitreous china squatting pan of orissa patern size (580 x 440mm) white with integral foot rest (excluding flushing cistern and flush pipe)

S & F in repairs 15 mm Dia CP Bib taps (Two-in-one), fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .

S&F in repairs Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified.

Supply only white cement in bags of 25 Kgs packing complete all as specified and directed.

S&F in repair 15 mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified & directed.

S&F in repair 15 mm dia bib tap cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F in repair 15 mm dia pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms) complete all as specified & directed.

S&F in repairs 15 mm dia stop valve cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 15mm dia angle valve, chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions, complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement

S&F in repairs 110 mm bore PVC (SWR) Pipes single socket, complete all as specified and directed.

All as per item No 57 here in before but 75mm bore and complete all as specified and directed.

S&F in repairs PVC bend/tee suitable for 110mm bore pipe complete all as directed

All as per item No 59 here in before but 75mm bore

Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing removing serviceable to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic colour tiles in vertical surface of size 450x 300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:4 all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer in CM 1:6, all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer in CM 1:6, all as specified and directed.

M&L in repair rotational moulded polythylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polythene float and fly nut complete and GI tank nipple, screwd for iron pipe complete all as specified and directed.

All as per iten No 65 here in before but 1000 ltr capacity.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth and complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 20mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 25mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

S&F CPVC pipes 15 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&L 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as directed.

S&L in 25 mm bore (Outer dia) CPVC pipes of SDR 13.5 and plain CPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as directed.

S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA)

S&F 25 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA)

S&F 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA)

S&F 25mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA)

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 32 mm PVC waste pipe 900 mm long with complete all as specified.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S& F Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L for 5mm thick plastering on ceiling surfaces in CM (1:3) surface finished even and fair complete all as specified and directed.

M&L for 20mm thick (in two layer) plastering on fair face of Brick surface with CM (1:4) mixed with WPC finish surface even and smooth with out using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster with CM (1:6) on other than fare face of brick wall finish even and smooth without using extra cement complete all as directed.

M&L for preparing new decorated plastered or unplastered surfaces of ceiling, pillasters, cornices etc and applying coat of 2 mm thick wall care putty with two coat acrylic distemper complete all as specified and as directed.

M&L for three coats of white wash on new decorated surface ceiling incl prepartion complete all as specified and directed.

M&L for two coats cement base paint over a coat of primer on newly plastered surface including preparation of surface, complete all as specified and as directed.

M&L for one coat of cement base paint (white or coloured as per site reqmt) on old decorated surface of external walls incl preparation to remove all foreign materials incl necessary arrandement for working platform complete all as specified and directed . Note : No separate payment shall be made for colour of distemper where required or directed. Cost is included in unit rate.

M&L for complete removal of existing treatment of old decorated ceiling surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated wall surfaces etc complete all as specified and directed.

M&L for 1mm thick wall care putty on old decorated walls surfaces complete all as specified and directed.

M&L for old decorated walls applying two coat of acrylic oil emulsion distemper complete all as specified and directed.

M&L for preparation of plastered and unplastered surfaces of old decorated walls, applying one coat of acrylic oil emulsion distemper complete all as specified and directed.

M&L for one coat of white wash on old decorated surface of ceiling incl preparation complete all as specified and directed.

M&L for one coat of synthetic enamelled paint on old decorated wooden surface exc 10cm width or girth including preparation complete all as specified and as directed.

M&L for one coat of synthetic enamelled paint on old decorated Steel surface exc 10cm width or girth including preparation complete all as specified and as directed. Note for item No. 1 to 98 :- The work to be carried out upto and including 12th floor. The rates quoted shall be inclusive of necessary scaffolding and safety measures of labours engaged in the work as per MES safety code of IAFW-2249”

Taking down carefully copper/aluminium point wiring complete (light , fan, plug point and power complete alongwith fittings switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store and making good of disturb surfaces of wall/floors etc as specified and directed

M and L for point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLSH type drawn through and including PVC concealed conduit/ casing caping (ISI maked) of adequate size and its accessories with sunk cast iron/ pressed steel terminal boxes of size 1.2 mm thick, one light or one fan point controlled by one switch incl. 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLSH type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metallic bodies of luminaries/ fan at other end complete all as specified and directed for the following :- Note: Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

One light point/ one fan point controlled by one, one way switch

One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified

All as per itrm No. 100.01 here in before but on independent board

All as per itrm No. 100.01 here in before but with 2.5 Sqmm PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified and connected to commen earth and earth terminals including boards for mounting purposes

All as per itrm No. 100.01 here in before but one bell/ buzzer point controlled by one push button on the same board with other switches or independent

Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 Volts white finish all as specified and directed.

Supply and fixing in replacement of bell push 230 Volts white finish all as specified and directed.

Supply and fixing as in replacement of socket outlet flush type 2 in 1,3 pin 5 Amp 230 Volts white/ ivory finish all as specified and as directed.

Supply and fixing as in replacement of 16 Amp switch flush type 230 volts single pole white/ ivory finish all as specified and as directed.

Supply and fixing as in replacement of socket multipurpose flush type 2 in 1 type (3 and 3 pin) 5/16 Amps, 230 V, AC white/ ivory finish all as specified and directed.

Supply and fixing as in replacement of awitch socket combination 3 pin, 16 Amp flush type all as specified and directed.

Supply and fixing as in replacement of angle type lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing in replacement of step type fan regulator complete all as specified and directed.

Supply and fix LED tube 20 W Tube light fitting LED Batten with aluminium housing and integrated electronic driver with square profile extruded connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5 m length complete all as specified and directed.

Supply and fix LED tube 9/10 W Tube light fitting LED Batten extruded and polycarbonated connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5 m length complete all as specified and directed.

Supply and fixing in replacement MCB DB double door with necessary lugs for incoming and outgoing connections upto Copper/ Aluminium conductor of 16 Sqmm fixed on wall surface/ concealed after taking down the existing DB of any make/ rating from any height for the following way:-

MCB DB SPN 4 Way

MCB DB SPN 8 Way

MCB DB SPN 12 Way

MCB DB TPN 4 Way

Supply and fixing in replacement MCB of following rating

MCB SP 6 to 40 Amp

MCB DP 6 to 40 Amp

MCB TP 6 to 40 Amp

MCB TPN 40 to 63 Amp

Supply and laying or fixing in replacement twin sub main cable with 2 X 4 Sqmm multistrand PVC insulated unsheathed copper conductor PVC cable FRLSH including continuous earth wire 1 X 4 Sqmm copper conductor insulated unsheathed complete all as specified and directed as following:-

In PVC concealed conduit

In PVC casing caping

Supply and laying or fixing in replacement twin sub main cable with 2 X 6 Sqmm multistrand PVC insulated unsheathed copper conductor PVC cable FRLSH, in PVC casing caping including continuous earth wire 1 X 6 Sqmm copper conductor insulated unsheathed complete all as specified and directed as following:-

In PVC concealed conduit

In PVC casing caping

Supply and fixing in replacement of PVC rectangular block sizes of following size for mounting switches, sockets, fan regulator etc by punching required slots for switches/ sockets/ regulators as per site requirement including taking down the existing metal/ PVC/ wooden boxes with back and top all as specified and directed

100mm X 100 mm square, 50 mm deep

175mm X 100 mm square, 50 mm deep

200mm X 150 mm square, 50 mm deep

250mm X 200 mm square, 50 mm deep

Supply and fix power unit up to 25 Amps including sockets 25 Amps, 04 module box for mounting of power unit and power socket complete all as specified and directed power unit. Make-Legrand Cat No. 675558, Socket 25AMPS boxes 4M (Legrand Cat No 673047), 4 module box (Legrand Cat No 689009)

Repairing/ testing Ceiling fan 1200/ 1400 mm sweep including rewinding, bush, bearing and fan blade suitable for 240 V, ISI marked, 50 Hz with regulator complete with all accessories and connection as per manufacturer instruction complete as directed. Note- 1. All fans must have 1.5 Sqmm copper conductor multicore twin twisted wire of 01 Mtr length. 2. Spare parts should be measured and paid separately

Supply only capacitor of capacity 2.5/4 mfd complete all as specified and directed.

Supply only Gun Metal bush suitable for any type of fan complete all as specified and directed

Supply only ball bearing of No. 6200/6201/6202/6203 complete all as specified and directed.

Repairing/ testing exhaust fan/ wall mounted fan upto 600 mm sweep including rewinding, bush, bearing and fan blade suitable for 240 V, ISI marked, 50 Hz with all accessories and connection as per manufacturer instruction complete all as specified and directed. Note- 1. All fans must have 1.5 Sqmm copper conductor multicore twin twisted wire of 01 Mtr length. 2. Spare parts should be measured and paid separately

SREE GURU CONSTRUCTION CO (BID ID -3075749)

ESS PEE UDYOG (BID ID -3076587)

DIPAK ENTERPRISE (BID ID -3080662)

SENCO (BID ID -3076452)

DK Contractor (BID ID -3081871)

M/S AVIJEET INTERNATIONAL (BID ID -3088480)