Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAccepted-AOC B 20 H 1 PANCHANANTALLA ROAD KOLKATA 700029 | KOLKATA | WEST BENGAL | 700029 | L1 | Accepted-AOC Being a lowest bidder and reasonable. | |
| 2 | L2₹43.7 L+₹2.6 L (6.42%)Rejected-Finance 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹45.4 L+₹4.4 L (10.8%)Rejected-Finance 72 A ABINASH CHANDRA BANERJEE LANE KOLKATA 700010 | KOLKATA | WEST BENGAL | 700010 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹46.2 L+₹5.2 L (12.6%)Rejected-Finance VILL JETHIA NATUN PARA PO JETHIA HALISAHAR PIN 743135 | 24 PARAGANAS NORTH | WEST BENGAL | 743135 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹48.2 L+₹7.2 L (17.5%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹37.5 L
EMD Value
₹75,000
Closing Date
5 Apr 2024, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIR/ MAINTENANCE OF VARIOUS SEWAGE INSTALLATIONS AND CLEANING OF SEWAGE SUMPS AND ALLIED MISC WORK AT INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2024_MES_645750_1
8233/E8
Open Tender
Civil Works - Water Works
Item Rate
240 days
GE (FW) Kolkata
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹75,000
Yes
3 Jun 2024
9 Mar 2024
6 Apr 2024
9 Mar 2024
5 Apr 2024
22 Mar 2024
Amount
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables/poles etc., forming bottom surfaces to required slope/gradient where pipe are laid and getting out in any type of soil complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.
Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
Supply, laying and testing of ductile iron pipes with spigot and socket ends, centrifugally cast of Class K-7 in any length, confirming to IS-8329, laid in trenches/floor including jointing by using elastomeric gasket, complete all as specified and directed for following size of pipes :-
100 mm bore
150 mm bore
M&L for cutting of road/hard standing not exc 30cm in width and not exc 60cm in depth for removal/laying of water tubing including returning filling and making good the disturbed surfaces with PCC 1:2:4 type B1 using 20mm graded aggregates, 100 mm thick, on top, finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L cleaning of underground sewage sump by blocking the inlet/outlet flow from manholes, lifting the excess semi -solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scraping the internal wall / floor with wire brush to remove deposited scales, mud etc from the walls / floor by using suitable tools and plants, manually from the bottom of the tank and removing the same at a distance n.exc 50m from site where directed and depositing in collection pit duly spreading of bleaching powder inadequate quantities over sludge and adjoining area including earth work for excavation of pit, returning filling, opening the blocked manholes etc before normalising flow of sewer, complete all as specified and as directed for the following capacities :-
60,000 gallons capacity underground sewage sump (Location: Calcutta Gate sewage Sump)
40,000 gallons capacity underground sewage sump. (Location: MAP Qtr sewage sump)
30,000 gallons capacity underground sewage sump. (Location: George Gate sewage sump)
20,000 gallons Capacity underground sewage sump. (Location: Strand Line-02 Nos, East gate , Treasury Gate, Water Gate & Ladies Golf Course sewage sump)
10,000 gallons capacity underground sewage sump. (Location: Chowringhee Gate sewage sump)
M&L Cleaning of 0.240 (STP)MLD RCC construction equalization tank of size 5.0m x 4.0m x 2.0m (Inner dimension) along with fine bar screen chamber, grit chamber and connected system by blocking the inlet / outlet flow from manholes, lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed, and depositing in collection pit duly spreading of bleaching powder inadequate quality over sludge and adjoining area including necessary earth work for excavation of pit and returning filling, complete all as directed .
M&L Cleaning of 0.240 (STP) MLD RCC construction clarified water tank of 8.5m x 4.0m x 2.0m (inner dimension) and lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed, and depositing in collection pit duly spreading of bleaching powder inadequate quality over sludge and adjoining area including necessary earth work for excavation of pit and returning filling, complete all as directed .
M&L Cleaning of 0..240 (STP) MLD RCC construction FMR (fludised media reactor) with tube setter / lamela setter tank ( MBBR and tertiary system) of size 10.5m x 3.2m x 3.0m (Inner dimension) and lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed, opening the blocked manholes etc before normalising flow of sewer complete all as directed.
M&L Cleaning of 0.240 (STP) MLD RCC construction sludge Holding tank of size 3.0m x 2.0m x1.8m (Inner dimension) and lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed, and depositing in collection pit duly spreading of bleaching powder inadequate quality over sludge and adjoining area including necessary earth work for excavation of pit and returning filling, complete all as directed.
M&L Cleaning of 0.240 MLD RCC construction filter water storage tank of size 3.0m x 3.0m x1.5m (Inner dimension) and lifting the mod water from the tank, removing the entire deposited mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed and depositing in collection pit duly spreading of bleaching powder inadequate quality over sludge and adjoining area including necessary earth work for excavation of pit and returning filling, complete all as directed.
M&L Cleaning of 1.240 (STP) MLD RCC construction equalization tank of size 12.0m x 10.0m x 3.0m (MBBR and tertiary system) (Inner dimension) along with fine bar screen chamber, grit chamber and connected system by blocking the inlet / outlet flow from manholes, lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed, and depositing in collection pit duly spreading of bleaching powder inadequate quality over sludge and adjoining area including necessary earth work for excavation of pit and returning filling, complete all as directed.
M&L Cleaning of 1..240 (STP) MLD RCC construction lamela setter tank ( MBBR and tertiary system) of size 12.5m x 7.5m x 2.0m (Inner dimension) and lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed, opening the blocked manholes etc before normalising flow of sewer complete all as directed.
M&L Cleaning of 1..240 (STP) MLD RCC construction Chlorine Contact tank of size 12.5m x 7.5m x 2.5m (Inner dimension) and lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed, opening the blocked manholes etc before normalising flow of sewer complete all as directed.
M&L Cleaning of 0.100 MLD (SBT)RCC construction wet well of size 1.2m x 1.2m x 3.5m (Inner dimension) along with fine bar screen chamber, grit chamber and connected system by blocking the inlet / outlet flow from manholes, lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed, and depositing in collection pit duly spreading of bleaching powder inadequate quality over sludge and adjoining area including necessary earth work for excavation of pit and returning filling, complete all as directed.
M&L Cleaning of0.100 MLD (SBT) RCC construction with tube setter / lamela setter tank of size 9.5m x 2.5m x 5.0m (Inner dimension) and lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush (to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank) , and removing the same at a distance n.exc 50m from site where directed, opening the blocked manholes etc before normalising flow of sewer complete all as directed.
Supply only Poly Aluminium Chloride (PAC) suitable for drinking water, high basicity in granular / powder form inorganic soluble polymer confirming to IS 15573 in required pack. Make : Vikram PAC or Equivalent
Supply only High strength calcium based granular chlorination chemical (Calcium Hypochlorite in 45 Kg Drum) having chlorine (cl) percentage by volume 65% to 70% (disinfectant for water treatment). Make: Purichlor /Aqua fit /declibac or any make and brand as approved.
Supply only high strength calcium based granular chlorination chemical (TCAA 90%) complete all as specified and as directed by Engineer-in-Charge. (Make : Chemtex/ABI or any other reputed make as approved by GE) Note : Material shall be procured directly from the Manufacturer or from authorised dealer in sealed pack/container. Purchase Voucher shall be submitted.
Supply only Alstasan Aqua (Eco friendly swimming pool disinfectant chemical, non-oxidizing, non chlorine content and non-toxic. Make: Alstasan Aqua, Chemtex speciality Ltd.
M&L, DI fittings for pipes upto 200mm bore such as bends (any type, radius and angle, coupling collar,) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. 'Y' junction, double socket flange branch, cross ,open flange(all sockets or socket and spigot) collars, caps and plugs complete all as specified and as directed.
Material and labour for run lead joint for 100 mm bore cast iron water mains including earth work as required and supply necessary lead as per sire requirement for repair of joint, complete all as specified and as directed by the Engineer-in-Charge.( Note:- old retrieved lead re used for joint)
Material and labour for run lead joint for 150 mm bore cast iron water mains including earth work as required and supply necessary lead as per sire requirement for repair of joint, complete all as specified and as directed by the Engineer-in-Charge.( Note:- old retrieved lead re used for joint)
Material and labour for run lead joint for 200 mm bore cast iron water mains including earth work as required and supply necessary lead as per sire requirement for repair of joint, complete all as specified and as directed by the Engineer-in-Charge.( Note:- old retrieved lead re used for joint)
Supply only lead conforming to IS782 , complete as all specified and as directed.
Taking out suction pipe of 150mm bore with defective CI foot valve/strainer of 200 mm dia and replace foot valve (ISI marked) including necessary nut, bolt, washers and cutting threading of GI pipe if required and lowering in the sump complete all as directed.
All as per Item No. 33 above but of size 100 mm bore
All as per Item No. 33 above but of size 80 mm bore
Supply, install, test and commissioning of 80mm bore CI Sluice Valve in repairs, Class PN-1.6, both ends flanged and drilled type with brass spindle including wheel, suitable rubber gasket for flanged joints, ISI marked, including provision of necessary jointing materials nuts and bolts, washers etc., complete all as specified and directed.
All as per item No 36 above but 100mm bore Sluice Valve.
All as per item No 36 above but 150mm bore Sluice Valve.
All as per item No 36 above but 200mm bore Sluice Valve.
S&F in repairs, 80 mm dia Butterfly valve in DI body with stainless steel disc & stem, nitrile/EPDM liner, lever operated, ISI marked including bolts, nuts and washers complete all as specified and as directed.
All as per item No 40 above but 100mm bore Butterfly Valve.
All as per item No 40 above but 1500mm bore Butterfly Valve.
S&F in repairs, 80mm bore, PN-1.0 Non Return valve in CI body with bypass arrangement, ISI marked including bolts, nuts & washers and packing material complete all as specified and as directed.
All as per item No 43 above but 100mm bore Non Return Valve.
All as per item No 43 above but 150mm bore Non Return Valve.
All as per item No 43 above but 200mm bore Non Return Valve.
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 5000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed.
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 2000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed.
Construction of valve chamber of size750x750x750 mm internal size suitable for housing sluice valve / gate valve etc with PCC 1:4:8 type D2 for foundation 15mm thick with an offset of 5 cm on all sides, brick work in CM 1:4 230mm thick rendering in CM 1:4, 15mm thick, 5 cm thick & 230mm wide PCC 1:2:4 type B1 coping over brick work all around including provision of MS angle iron frame 25 x 25 x 3mm embedded in concrete with suitable hinges 3mm thick MS sheet cover and locking arrangements including two coats of synthetic enamel paint over a coat of red oxide metal primer on exposed steel surfaces including demolition of existing damaged valve chamber and necessary excavation & earth work etc all as specified and directed.
Taking up / down unserviceable / rust valve pit cover and frame / support or platform etc of any size/thickness and supply, fabrication and fixing of framed brackets, made of mild steel plate/ flat / angle iron (of required size), cut to shape and size, as in valve pit cover/ frame / support or platform including necessary bending / welding etc as required and applying two coats of black bituminous paint over a coat of red oxide zinc chrome primer complete all as directed.
RAJ ENTERPRISE
MS HORIZEN
BASU AND CO
M. M. C. AND CO
CHOWDHURY SMALL INDUSTRIES
MS AP CONSTRUTION AND CO
GHOSH ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .