REPLACEMENT OF COPPER CONNECTED POINT WIRING IN LIEU OF OLD UNSV ALUMINIUM BATTEN TYPE POINT WIRING WITH ELECTRICAL CONNECTED ITEMS AT VARIOUS UNITS IN THE AOR OF AGE E/M UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) and making good the disturbed surface all as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed.

All as per item No.2 here-in-before but one socket outlet point 5 amps on the same board.

All as per item No.2 here-in-before but one socket outlet point 5 amps on the independent board.

All as per item No.2 here-in-before but with 2.5 Sqmm cable on independent board for 15Amp socket outlet.

S&F in repair modular switch flush type, 6 amps one way,SP,230 volts AC complete all as specified and directed.

S&F in repair modular socket outlet 6 amps complete all as specified and directed.

S&F in repair modular socket outlet 6 & 16 amps complete all as specified and directed.

S&F in repair modular switch flush type, 16 amps one way,SP,230 volts AC complete all as specified and directed.

Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts complete all as specified and as directed.

S&F in repair modular Step Fan regulator, 70 watts compatible with energy saving BLDC fans single / double module all as directed.

S&F in repair of Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed. Note-For extension connection of pc system etc

S & F in replacement of Modular white cover plate with frame 12 module all as directed

S&F in replacement of rigid non metallic PVC conduit 20 mm dia medium grade inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete / concealed including cutting chases and making good in CM 1:3 to match with existing surfaces & finish the surface all as specified and and as directed.

S&F in replacement sub main wiring with 2 runs of 4 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia concealed PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 4 Sqmm FRLS PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F sub main wiring with 2 runs of 10 Sqmm FR, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 10 Sqmm FR, PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watt cool/warm white as per site requirement complete all as specified and as directed.

S&F in replacement of electronic driver 36/40W suitable for 2x2 Led ceiling Lights complete all as specified and as directed.

Supply and fixing in replacement of LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed

Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

S & F in replacement MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connection complete all as specified and as directed.

S&F in replacement MCCB 3 pole of capacity 125A, 10KA ics 100% with thermal magnetic release including spreader/thimble of suitable size and making connection complete all as specified and as directed.

S&F in replacement MCCB 3 pole of capacity 160A, 10KA ics 100% with thermal magnetic release including spreader/thimble of suitable size and making connection complete all as specified and as directed.

S & F in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

Supply and fixing in replacement of MCB SP, C Curve type, 10 KA, 6 to 32 Amp, with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of Isolator SPN , 10 KA,40 to 63 Amp, complete all as directed.

Supply and fixing in repalacement Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. complete all as specified and as directed.

Taking down of ceililng fan any type size complete with blades, fan clamp etc and depositing to MES store yard after dismantling blade complete all as specified and as directed.

M&L Painting of ceiling fan complete in situ with synthetic enamel paint by spraying incl fillings cavities with filler including preparation of surfaces complete all as specified and as directed.

Supply and fixing of ceiling fan J hook fabricated out of MS flat 25 x 5 mm thick complete all as specified and as directed.

M & L for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed

Refixing Ceiling fan any type size complete with blades and accossories and provision of flexible cable from connector to ceiling rose complete all as specified and as directed. (obtained vide srl item No 28 here-in-before)

S&F in replacement of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.

S & F in replacement of FRLS PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5 sqmm, 1100 volts grade cable complete.

S & F in replacement of PVC flexible pipe 20mm dia complete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

SANJEEV ENTERPRISES (BID ID -3204517)

M/s Sohanil Construction (BID ID -3207425)

aggarwal engineers contractors (BID ID -3208370)

SHREE BALAJEE ENTERPRISES (BID ID -3208051)

R R Associates (BID ID -3204853)

Ruchi enterprises (BID ID -3208406)

yameen enterprises (BID ID -3207491)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3208358)