Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹42.8 L+₹4.4 L (11.5%)Rejected-Finance OODLABARI P O MANABARI DIST JALPAIGURI WB PIN 735222 STATE WEST BENGAL | JALPAIGURI | WEST BENGAL | 735222 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹43.8 L+₹5.5 L (14.2%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹45.6 L+₹7.2 L (18.9%)Rejected-Finance C O UTTAM BANIK HAIDERPARA OPPOSITE TO WEST BENGAL REPRESENTATIVE REST HOUSE P O HAIDERPARA SILIGURI 06 | JALPAIGURI | WEST BENGAL | 734006 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹45.8 L+₹7.4 L (19.3%)Rejected-Finance OODLABARI P O MANABARI DIST JALPAIGURI WB PIN 735222 STATE WEST BENGAL | JALPAIGURI | WEST BENGAL | 735222 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
COMPREHENSIVE MAINT AND PERIODICAL SERVICES IN ZONE A AREA UNDER BAGRAKOTE MIL STN UNDER GE SEVOKE ROAD
2023_MES_617571_2
8261/SEV OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹90,000
Yes
5 Jan 2024
4 Nov 2023
5 Dec 2023
4 Nov 2023
27 Nov 2023
13 Nov 2023
5 Nov 2023 - 8 Nov 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as directed.
Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each including guard bar, if any complete all as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as directed.
Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as directed.
Hacking out broke glass (any thickeness and size) from metal frame including punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all directed.
Taking up or down galvanised steel water tubing 15mm bore from wall/ceiling/floor including all fittings, segregating and stacking the pipes and fittings properly at site for checking complete all as specified and as directed
All as per Item No 9 here in above but for 20mm bore.
Dismantling of 110 /75mm bore PVC drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan, exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F100mm size of stainless steel butt hinges, medium weight, cold rolled complete all as specified and as directed.
S&F 100mm size extruded aluminium alloy handles, fabricated type complete all as specified and as directed.
S&F 150mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F in repairs Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as directed.
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3 @ 60cm centre to centre and fixed to steel or wooden member all as specified and as directed.
M&L 4mm thick decorative type non asbestos fibre cement building boards fixed or laid/inserted to aluminium frame work as in ceiling complete all as specified and as directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.
M&L75mm thick PCC 1:4:8, type D2, using 40mm graded aggregate as in sub base complete all as specified and as directed.
M&L 40mm thick for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished even and smooth using extra cement complete all as specified and as directed.
S&F glass dividing strip 3mm thick & 38mm width complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 300x 450x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles surfaces, over and including 10mm thick rendering as backing coat in cement mortar (1:4) complete all as specified and directed.
M&L for Light Shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed.
M&L for Light Shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles surfaces, over and including 10mm thick rendering as backing coat in cement mortar (1:4) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces over and including 15mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles surfaces, over and including 10mm thick rendering as backing coat in cement mortar (1:4) complete all as specified and directed.
M&L 15 mm thick rendering in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth w/o using extra cement complete all as specified and as directed.
M&L for rendering 20 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth w/o using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.
All as per Item No. 36 here in above but on ceiling.
M&L for preparation of new plaster surfaces and applying three coats of white wash on wall complete all as specified and as directed.
M&L Preparation of new plaster surfaces and applying two coats of OBD over a coat of chalk whiting on wall complete all as specified and as directed.
M&L for washing, rubbing down, stopping of distempered and painted surfaces of walls and applying distemper, one coat, with distemper oil emulsion, white or tinted complete all as specified and as directed.
M&L for complete removal of existing treatment of walls and applying two coats of oil emulsion distemper over a coat of alkaline resistant primer complete all as specified and as directed.
Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.
S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified & directed.
M&L for preparation of old painted wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
All as per Item No. 44 here in above but surfaces not exceeding 10cm in width or girth when un-connected with other painting or when painted in a different tint.
M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described, and applying one coat of synthetic enamel paint (1st quality) complete all as specified and as directed.
M&L for preparation of old rusted steel surfaces of CGI/ PGI sheet as in roof, cleaned off all rust by brushing with wire brushes and applying two coats of anticorrosive roof paint over priming coat of red oxide primer, over 10cm in width or girth complete all as specified and as directed.
M&L for prepartion of old painted steel or iron surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for writing letter or figures, using thick paint, as approved, (Block, Roman, Italic or Indian) not exceeding 30cm high complete all as specified and as directed.
S&F 15mm dia steel water tubing, galvanised, medium grade with all fittings and fixed to wall and ceiling or laid in floor in old/new position complete all as specified and as directed.
All as per Item No. 51 here in above but 20mm bore.
Refixing old serviceable galvanised steel water tubing 15mm bore (serviceable pipe obtained from item No 9 here in above) in new or old situation/alignment of wall, ceiling or floor including provision of all new fittings including discaling/cleaning of pipe (internally and externally) cutting and threading of tubing ends complete all as specified and as directed.
All as per Item No. 53 above but 20mm dia retreived under Ser item No. 10 here in above
M&L for cleaning of service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits/scales, algae formations, silt/sticky matters adhering tank surface and washing inner tank surface with approved grade of chemical twice followed by re-cleaning with plain potable water to remove any trace of chemicals complete, of capacity exc 250 litres n exc 500 litres complete all as directed. Notes :- (i) On completion of cleaning of tank, date of cleaning to be marked/written clearly on tank surface in an accessible location with letters or figures not exc 5 cm high viz (as per example) “TANK CLEANED ON ------------” (ii) Cleaning of tank to be carried out in accordance with the schedule published for the purpose of cleaning of tank (iii) During cleaning of the tanks, any vegetation and growth on the roof slab shall also be removed by the contractor and the quoted rates are deemed to include for the same.
All as per Item No. 55 above, but of capacity exc 500 litres n exc 1000 litres.
All as per Item No. 55 above, but of capacity exc 1000 litres n exc 2000 litres.
S&F in repairs 15 mm bore Chromium Plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repairs 15mm bore Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repairs brass CP mixture 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed
S&F in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20mm bore and fixed complete all as specified and as directed.
S&F in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25mm bore and fixed complete all as specified and as directed.
S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
S&F in repairs bib tap standard of PTMT (minimum weight 90gm), any colour, screwed for iron pipe of size 15 mm and fixed complete all as specified and as directed.
S&F in repairs 25 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm- 42gms/ 20mm - 210 gms/25mm-455 gms/40mm - 690 gms) complete all as specified and directed.
S&F PVC connections, 15 mm size with PTMT nuts of length 600 mm, complete all as directed.
S&F in repairs, shower rose of size 125mm, chromium plated with or without swivel joint including fixing to steel pipe or union complete all as specified and as directed.
S&F in repairs vitreous china wash hand basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.
S&F in repairs sinks made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white with "P" or "S" Trap front or back inlet fixing bolts, PVC seat cover complete and making all necessary connection as specified and directed.
S&F in repairs vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest and accessories complete all as specified and as directed.
S&F in repairs PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc. complete all as specified and as directed.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F Stainless Steel 20mm dia Curtain Rod complete all as specified and as directed.
Supply only Stainless Steel brackets, fancy type for fixing 20mm dia curtain rod complete all as specified and as directed.
S&F in repair Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and as directed.
S&F in repair Fancy type chromium plated Stop/angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair Fancy type chromium plated concealed Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed. Make: Essco Cat Part No-MQT- 512AN or equivalent model in make Prayag/ Lauret/ Century/ Gem/ Aquel/ Ess Ess/ Parko/ Plastocraft, as approved by the GE.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm bore complete all as specified and as directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm bore complete all as specified and as directed.
S&F Soap dish Stainless steel fixed to wall with screws complete all as specified and as directed.
S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed.
S&F PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs 32mm PVC Waste Pipe complete all as specified and as directed.
S&F in repairs 40mm PVC Waste Pipe for urinal complete all as specified and as directed.
AJOY PAUL
M S ALOK SAHA
M/s. STRUCTURES INDIA
AJOY DEY
BIJOY DEY
M/S Bikash Saha
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .