SPL REPAIR TO BLDG NO P-27 OR LINE/MESS (CHANAKYA BLOCK) OF 1WEC UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified

Demolition of cement ( Un-reinforced) in above Ground floors and paving exc 15cm thickness above ground level) complete all as specified.

Taking down chowkhat or frame not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame)

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame)complete all as specified

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

Demolition of reinforced cement concrete such as chajja,manhole cover water tank parapet wall ,lintel up to 4.5 m span including hieght upto eight storey building , in any position all as specified and as directed by Engineer -in-Charge.

Taking down of cement plaster of any description, including racking out joint and washing with water complete all as specified

Taking up or down steel tubing and connections, bore of tubing 15mm complete all as specified

Taking up or down steel tubing and connections, bore of tubing 20mm complete all as specified

M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified .

M & L for 20mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified.

Demolition of brick work built in cement or cementlime mortar of any description including quoins, arches, pillars, etc., all asdirected.

M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks, old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.

M&L for cement concrete 40mm thick type B-1 1:2:4 (20mm graded aggregate) ,even and smooth without using extra cement finishes of paths laid in alternative panel.complete all as specified

Complelte removal of existing old treatment on surface of walls with machenical grinder (machine) as per specification of manufacturer paints/OBDs complete all as specified and directed.

M& L a coat of alkali resistant primer over alread prepred surface of walls complete all as specified and directed.

M& L for applying two coats of oil bound distemper on wall surface with roller brush complete all as specified and directed.

M&L for prepared surface of old ceiling and apply two coat of white wash on ceiling, complete all as specified and directed.

M&L Rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:4) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately.)

M&L for rendering 5 mm thick in CM 1 : 3 on brick or concrete surfaces (in ceiling) etc finished fair and smooth complete all as specified.

M&L for preparation of newly plastered surfaces of wall and apply two coat oil bond distemper over one coat of primer from the same manufacture complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of density 650 kg/cbm manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified& directed.” Note: 1. MTC and Screw Out Test will be provided by Contractor. 2. Wire mesh and XTN aluminium mesh is included in quoted rates. No cost will be paid separately.

S&F of Floor door stopper with overall length of cover plate 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for cement concrete Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) as in PCC blocks for holdfasts, benching, coping and the like including cweathering,slightly rounded or chamfered angles Complete all as specified.

Supply and fix stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed.

Supply and fix 200 mm long mild steel barrel tower bolt , complete all as specified

Supply and fix 150 mm long mild steel barrel tower bolt , complete all as specified

Supply and fix 300mm long, mild steel, sliding door bolt matt finish snot less than 16 mm dia bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded section or cast aluminum alloy, complete all as specified.

Supply and fix extruded aluminum alloy handles fabricated type anodised of size 100mm long.

Supply and fix extruded aluminum alloy handles fabricated type anodised of size 150mm long.

Supply and fix butt hinges, medium weight cold rolled mild steel 100 mm size welded to angle iron frames or fixed with screws to wooden frames.

Supply and fix 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding where ever necessary complete all as specified and directed Make:Ritz or equivelent

S&F brass chromium plated magic eye complete all as specified

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified

Supply only Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge.

Cuttting chases for concealed water tubing or concealed conduct wiring etc and making good cutting exc 10 cm grith in brick wall.

S & F in repair fancy type, chromium plated with long shank and cup (concealed type) Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm iron pipe or for unions and fixed complete all as specified and directed .

Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified

Supply only PVC low level white flushing cistern valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified.

Supply and fix in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified.

S&F in repair vitreous china squatting pan (Orissa pattern) long pan (including provision of lime concrete bedding) of size 580x440mm white with intergral footrest including providing 100mm bore CI 'P' or 'S' trap complete all as specified (excluding flushing cistern and flush).

Supply and fix in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F in repair PVC connection 15mm dia and 60 cms long with two nos of brass nuts and washers complete .

Supply and fix in repairs shower rose, chromium plated brass, fancy type, 125 mm and dia 15mm, with or without swivel , any size, including fixing to steel pipe or union, complete all as directed.

S & F in repairs towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embeded in cement mortar 1:3 with MS screws etc complete all as specified and directed.

S&F in repair Soap dish, vitreous China white, approximate size 160x 160x90mm , complete all as specified.

M & L for Glazed ceramic coloured tiles 600x 300 x 9 to 10mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as directed

M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade of tiles and including cement screeding 15mm thick in cement mortar 1:4 complete all as specified and as directed

Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dusts etcand applying neat cement slurry over rough concrete surface with 3.00 kg of cement/sqm.

M&L for Virified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including provn of 15mm thick screed bed or bedding layer in CM 1:4 etc complete all as specified .

M&L for Virified Ceramic tiles of light shade 10 mm thick on vertical surface (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 10mm thick rendering of backing coat in CM 1:4 etc complete all as specified .

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and chamfered edges complete and including provn of 20mm thick screed bed or bedding layer in CM 1:4 etc complete all as specified .

All as per Item No 59 above but in riser skirting/dado and pillar over and including 10 mm thick rendering in CM 1:3 complete all as slpecified and directed.

M&l for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationscomplete all as specified and directed.

M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) and chamfered edges using marble dust with admixture of pigment to match with shade of granite.including grinding, nosing and polishing including 15 mm thick screed bed in CM 1:4 complete all as specified

M&L Providing 75mm thick cement concrete type C-2, 1:3:6 ( using 40mm graded stone aggregate), as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement complete all as specied

S & F in repair stainless steel drapery Rod 25mm dia make and model of vista, including steel side caps, brackets, and rings @ 120mm c/c, complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

S&F TMT steel bars of 10 mm dia and over,cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed by Engineer-in-Charge

M&L for Reinforced cement concrete 1:2:4 Type B-1 (20 mm graded agg) in shelves & similar items complete all as specified and as directed by Engineer-in-Charge

Demolition and breaking up of 100mm dia drain pipes (CI,AC etc) set in any cement mortor of any diameter incl bends.

M&L for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and trenches complete all as specified and directed.

All as of above item no. 70 but of 75mm dia complete all as specified and directed.

S & F bends 110mm dia PVC (SWR) bends complete all as specified

S & F bends 75mm dia PVC (SWR) bends complete all as specified

S & F 110 mm dia size,PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and directed

S & F 110mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval acces door complete alla as specified and directed.

S & F 75mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval access door complete all as specified and directed.

S & F 75mm dia PVC (SWR) floor trap, plain with 100mm stainless steel grating including jointing with solvent cement complete all as specified and directed.

S&F 100mm dia stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay including boltstand nuts seuring ends of stays to wall complete all as .

Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring

Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick including frame confirming to IS:14587 complete to all as spd.

S&F of Stainless steel auto closing hinges openable at degree for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed.

S&F of stainless steel handles 100 mm size for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed.

S&F brass chromium plated tubular hanger rod 20 mm dia complete all as specified and directed.

S&F brass chromium plated tubular hanger brackets 20 mm dia complete all as specified and directed.

S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws.

S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Fe-410- W(Gde-E-250) quality-B framed work of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, Note :- frame provide over chhajja upto G+1 storey building using scaffolding .

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note :- steel sheet , provide over chhajja upto G+1 storey building using scaffolding .

M&L for chipping out spilled and loose concrete cover and derusting steel reinforement of concrete column, beam, slab, chajjas, parapets and the like as directed upto 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforecement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guiniting mix using one part of OPC 53 grade and two part of gaggar sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out upto 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforecement all concrete surfaces shall be throughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

Dismantling of brick tiles or terracing tiles single layers as on roof complete all as directed

Demolition of mud/rubbish in roof any thickness inlcl plastering and leeping and disposal outside MoD land all as specified

S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner.

M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) on roof padding, coping,kerbs & sunken surface finished even and smooth without using extra cement complete all as spd & directed.

M&L for applying APP based polymeric water proofing membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) over Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces over a coat of bitumen primer conforming to IS -3384 @ 0.40 ltr/sqm over prepared roof surfaces with using butane gas torch ,forcing overlap 100mm at ends and 75 mm at sides and sealing

S&F 5mm thick figured glass, pin head type and glazing for aluminium ventilators in squares n exc 0.5 sq. m in each pane each pane complete all as specified and directed.

S&F powder coated (minimum 50micrin thick) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F anodised aluminum glazed/gauzed powder coated windows and ventilators shutters Top/Side hung type without sash bar aluminum section weighing 0.55 kg per mtr including necessary jointing cleats glazing clips rubber packing anodised aluminum beading screws including fittings such as 1 no peg stays 150 mm long, 2 nos aluminim hinges 75 mm long ,2 no tower bolt 100 mm long and 1 no aluminim handle 100 mm long etc in each shutter complete all as specified.

Material and labour for aluminium alloy Powder coated standard 10mm section and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed.

M&L for aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44045 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm incl as durected and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required incl handle ,tower bolt ,floor spring heavy duty "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete in all respect all as specified

Supply only integral water proofing compound (ISI marked).

S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

Supply plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified

M&L 5.5mm thick sheet glass n exc 0.5 sqm each pane ordinary quality and glazing withoil putty or fixed with beads, all as directed.

M&L for newly plastered surface of wall, Applying with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr over a coat of Trucare exterior wall primer or equivalent to be done @1ltr/10sqm with spray Graco-490 spray machine after cleaning and removing dirt dust , thoroughly brushing the surface to obtain an even surface with touch-up putty including all material labour, necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work. Manufacture should have at-least two manufacturing units within 100km radius to ensure uninterrupted supply.

M&L for complete removal of existing treatment of wall and applying average 3mm thick Asian wall Putty or equivalent two or more coats to get even and smooth surface and making the wall surface / Corners even and smooth and applying two coats of Tractor Suprema Acrylic Distemper with Graco 490 spray machine over a coat a primer complete all as specified and directed.

M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture,design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge.

Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified.

M&L for 15mm thick rendering on fair face of brick wall surface in CM 1:4 even & smooth finish without using extra cement as specified and as directed.

M&L for 200mm dia Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as requiredcomplete all as specified and directed.

Supply and laying DWCPE (SN8) 200mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in trenches to a level on cocrete bed complete all as specified and directed by Engineer-in-charge with demolition of old sewage pipe.

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, manhole and mass concrete complete all as specified.

S & F in replacement precast fibre reinforced cement concrete drain cover with holes including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm x50 mm omplete all as specified and as directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out all as specified.

M&L for 25mm thick Sand filling under floors or in foundation including watering and consolidation

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40

M & L for cement concrete type B0 1:2:4 (using 12.5 mm graded aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets light fitting etc. and making good disturbed surfaces of walls, floors ,etc.

Taking down carefully sub main wiring of any description.

Taking down defective switch fuse main board / distribution iron clad or sheet metal enclosure/ MCB DBs with MCBs of any capacity and make including wooden board etc complete all as specified and directed.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall ,on surface in roof/column & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of one run of PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable as earth wire connected to common earth dolly.

(a) One light/fan/bell point controlled by one way switch

(b) One light point controlled by two, two way switch

(c) One 3 pin switch & socket outlet 5 hole 5 Amps on independent board.

(d) -ditto- as above item No 125.03 but Same board.

M & L in power point with two runs of insulated stranded copper conductor cable 4 Sqmm single core concealed in wall and one run of PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm as earth wire connected to earth dolly complete all as specified and directed.

M&L for submain wiring concealed on wall and surface on column with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit 25 mm dia, medium grade for submain wiring and one run of FRLS grade,unsheathed copper conuctor cable of 6 Sqmm size as earthwire connected to earth dolly complete all as specified and directed.

M&L for submain wiring concealed on wall and surface on column with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including PVC conduit 25 mm dia, medium grade for submain wiring and one run of FRLS grade,unsheathed copper conuctor cable of 10 Sqmm size as earthwire connected to earth dolly complete all as specified and directed.

M&L switch Modular type 6 Amp SP one way ISI marked complete all as specified

M&L switch Modular type type 16 Amp SP one way, ISI marked complete all as specified

M&L Modular type socket outlet 2 in 1,5 pin 6 Amp , ISI marked complete all as specified

M&L Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified

M&L Modular type switch 2 way 6A ,1 module type, ISI marked complete all as specified.

M&L ceiling rose 3 terminal, PVC polycorbonate,isolated body.

M&L bell push,modular type,6 amp, 1 module ISI marked complete all as specified

M&L bell ding dong AC,230 volts,single pole

S & F angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.

S &F LED bulb 9 watts, >900 lumens output, 6500K, suitable for B-22 base.

Taking down carefully the existing ceiling fan of 1200mm from its position after disconnecting electric connection and making good surface deposits to MES store all as specified and directed.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

M&L distribution board SPN 8 way with 200 Amp rated bus bar double door.

M&L Isolator SPN 40 Amp 240 volt "B " curve.

M&L mcb SP 6 to 32 Amp "B" curve.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2400 systems lumen outputwith lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 35 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed.. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire.

M&Ldistribution board double door, TPN 4 way load line DBs IP 43-IK 09 With metal door with provision of MCCB 160 Amp incomer and including 200 Amp rated bus bar,415 Volts and also Iincluding outgoing SP/TP MCBs 10 nos.

M&L MCCB 125 Amps, 4 pole 16 ka .

Supply and fix LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 2400 systems lumen outputwith lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

M&L for breaking old existing wall and making a provn for fixing of 300 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.

supply and fix recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed.

Provn of exhaust fans in replace , metal body AC single phase 230/240 V of size 300 mm sweep with louvre for fixing of exhaust fan complete all as directed by Engr-in-Charge.

Provn of fresh air fan PVC body AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.

Provn of S &F Wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans against BLDC conversion of old fan AC single phase 230/240 V of size 1200 mm sweep ,min air delivery 210 CFM with service value 6.0 BEE, 5 star rated BLDC fan including making connection with three core flexible, copper winding in fan ,copper cable pvc insulated of suitable length and marking of fan no with black paint complete all as directed by Engr-in-Charge.

blues developers pvt ltd (BID ID -3409106)

M/S ANIL KUMAR (BID ID -3409451)

MOUNIKA ENTERPRISES (BID ID -3409146)

POONAM ENTERPRISES (BID ID -3407200)

M/S Rohit Enterprises (BID ID -3407960)

M/S Sunil Steel Works (BID ID -3409416)

JYOTI ENTERPRISES (BID ID -3407578)

M/s M M BAHL (BID ID -3409285)