Repairs to Flooring joinery sunken floor internal water supply and certain other misc works at Armt Wing AVS SOTT HQ SOTT area under AGE B/R-I at GE(N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor, wall tiling etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15cm thick etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames nexc 1.5 Sq m with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutter exceeding 1.00 Sqm but not exc 2 Sqm etc complete all as specified and directed by Engineer-in-Charge

Dismantling of flase ceiling etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block masonary built in cement and sand mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling of asbestos cement (corrugated semi corrugated) or galvalume sheets in roof covering etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Taking down steel tubing and connections,15 mm bore etc complete all as specified and directed by Engineer-in-Charge

All as per item No 10 (here-in-before) but 20mm bore

M&L for 75 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment and applying 10mm thick cement plaster in cement and sand mortar (1:4). Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC (1:5:10) type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC (1:4:8) type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, area of WC exc 1.50 Sqm but nexc 5.00 Sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge

Material and labour for pre-cast cement concrete block masonry with solid blocks, type C1 in 1:3:6 (20 mm graded aggregate) exc. 10 cm in width and setting built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs to false ceiling with 4 mm thick plain non asbestos building 'E' board with decorative finish water proofed on one side fixed on and including powder coated GI fabricated grid of 60 cm X 60 cm made out of main runner of 'T' section of size 32 mm X 24 mm X 0.30 mm, cross runner made out of 'T' of section of size 24 mm X 24 mm X 0.30 mm and alround angular section of size 22 mm X 22 mm X 0.70 mm suspended by 4 mm dia GI wire fixed to roof at 600 mm centre to centre as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling in door frames in plain cement concrete (1:2:4) type B0, using 12.5 mm graded stone aggregate etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, the shutter shall be fixed with and including stainless steel hinges 100mm size etc complete all as specified and directed by Engineer-in-Charge

S&F steel windows double shutter with side hung shutters incl box/projecting type hinges with steel handles and steel peg stay complete with guard bar and glazing bars dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge

S&F mild steel barrel tower bolt 200mm long , stove enamelled black, with bright bolt etc complete all as specified and directed by Engineer-in-Charge

S&F mild steel sliding door bolts 300mm long , plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 200mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy etc complete all as specified and directed by Engineer-in-Charge

S&F for mild steel pressed handles 150mm long , oval type, stove enamelled black etc complete all as specified and directed by Engineer-in-Charge

S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

M & L for 18mm thick block boards in repairs , grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame-work etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 3mm thich figured glass pin headed type glazing with oil putty, bead in squares n.exc 0.50 Sqm Each etc all as specified as per item above

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in Each pane etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed by Engineer-in-Charge

Supply and fix galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Taking down and opening the existing Steel rolling shutter, pull push type, not exc 12 sqm each in area as clear opening, including hood cover, cleaning the sides guides , suspended shaft, anti guide channels, straightening/rolling shaft and replacement of bolts & nuts after greasing all the moving parts of rolling shutter and refixing in the same opening to make it for smooth functioning etc complete all as specified and directed by Engineer-in-Charge

All as per item No 36 (here-in-before) but gear operated shutter area exc 12 Sqm but not exc 25 sqm each including adjustment of gear assembly.

Supply , fixing and errecteing in position in repairs steel rolling shutters of any height with thickness of laths 1.25 mm , push pull or manual type with out ball bearing including top cover, bottom plate,anchoring rod, hasp and staple, mild steel handle including applying one shop coat of red oxide primer, erected in position etc complete all as specified and directed by Engineer-in-ChargeNote: Net area of opening shall be measured for purpose of payment etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc complete all as specified and directed by Engineer-in-Charge

M&L for rolled sections of structural steel work as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles of size exc 0.06 Sqm and n'exc 0.18 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 60mm thick, PCC pavers interlocking tiles glossy finish, any shape & size conforming to IS 15658 of 2006. M-25 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 15mm thick sand cushioning and joints filled with fine sand incl levelling & sweeping etc complete all as specified and directed by Engineer-in-Charge

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick, area of tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor etc complete all as specified and directed by Engineer-in-Charge

All as per item No 45 (here-in-before) but as in skirting / dado over and including screed 10mm thick in cement and sand mortar (1:4)

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of Each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor etc complete all as specified and directed by Engineer-in-Charge

Material and labour 16-18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing , pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed bedding in cement and sand mortar (1:6) laid and jointed in neat cement slurry & pointed with pigment to match the shade of kota stone including rubbing and mirror polishing etc complete all as specified and directed by Engineer-in-Charge

All as per item No 49 (here-in-before) but as in skirting / dado over and including backing coat of 10 mm thick in cement and sand mortar (1:4)

Material and labour for rendering, 10 mm thick on ceiling surfaces in cement and sand mortar (1:4) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L rendering 10mm thick in cement and sand mortar (1:6) on brick or concrete surface/ stone surfaces finishing even and smooth with thin layer of sagol finish etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering to 15 mm thick in cement and sand mortar (1:4) on brick/concrete/stone surfaces etc complete all as specified and directed by Engineer-in-Charge

Dismantling of water tanks from any position / location, of any make etc,of capacity exc 500 Ltr & n.exc 1000Ltr with ball valve etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs tubular towel rail, brass chromium plated 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as directed. Make : Cat Part No 10004 of Hindware or Cat Part No C0475 of Parryware or equivalent in makes imentioned in list of makes in Appendix `C'

Supply and fix in repairs mild steel 32 mm dia CP curtain rods with fixing brackets etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A(Orintal series) of MARC or equivalent makes in list of makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore Make:- Cat part No MOR 1320 (Orintal series) of Marc or equivalent makes metioned in list of makes in Appendix `C'

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1010 (Orintal series) of Marc or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs, shower rose with shower arm from Make:- Cat part No Marc MSR1050 (Shower) and MOR 1260 (Shower arm) from Marc or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 63 (here-in-before) but 1000 ltrs etc.

All as per item No 63 (here-in-before) but 2000 ltrs etc.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed all as specified and as approved by GE/Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer

Supply and fix in repair health faucet with 8 mm dia 1 m long flexible tube wall mounted / hooked etc complete all as specified and directed by Engineer

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed. Make :- Sleek essence series of Hindware or Cat part No E8303 of Parryware or equivalent in makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs 15 mm bore galvanised steel tubing medium grade laid in trenches or fixed to walls / ceiling etc complete all as specified and directed by Engineer

All as per items ser No 70 (here-in-before) but 20mm bore.

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer

S & F in repairs looking mirror of size 600 mm x 450 mm etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C 8610 of Parryware or euivalent or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs 75mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with stack clamps FI 50mm by 5mm flat iron clamps to walls incl bolt & nuts etc complete all as specified and directed by Engineer

All as per item No 74 (here-in-before) but 110 mm dia

Supply and fix in repairs PVC (SWR) bends any radius, for 75mm bore of pipe with access door etc complete all as specified and directed by Engineer

All as per item No 76 (here-in-before) but 110 mm dia

S&F 110 mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal etc complete all as specified and directed by Engineer

S&F 75mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal etc complete all as specified and directed by Engineer

M&L for screed bed or bedding layer of mortar 10mm thick in cement and sand mortar (1:3) by using 100% course sand on roof/chajja mixed with & including M&L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement to receive water proofing treatment including taking down existing screed bed / plaster etc complete all as specified and directed by Engineer

M&L for providing waterproofing treatment on roof / chajja / parapet etc. as per latest zonal specification, as per manufacturer's instructions and as specified after taking down / out as existing as site:- (a) M&L for cleaning the newly plastered surface with wire brushes and applying two coats of bituminous primer @ 0.25ltrs/sqm and allow to dry. (b) M&L for applying and laying torch APP polymer modified bituminous membrane 3mm thick with non woven polyster matt as reinforced weighing not less 3 kg / Sqm with white gravel / mineral finished by thermofusion process.

M&L for preparing unplastered or plastered surfaces and applying two coats of oil bound distemper including chalk whitening on wall including smooth roller finish etc complete all as specified and directed by Engineer

M&L for preparation of old / new surfaces of walls & applying two coats of acrylic (antifungal) exterior grade paint on wall etc complete all as specified and directed by Engineer-in-Charge.

M&L for applying one coat of synthetic enamel paint on old surfaces of any description exc 10 cm width or girth including preparation of steel surfaces and smooth finish etc complete all as specified and directed by Engineer

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer for newly / old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer

M&L for preparation of newly / old plastered surface and applying three coats of white wash on wall etc complete all as specified and directed by Engineer

M&L preparation of new / old plastered surface and applying three coats of white wash on ceiling etc complete all as specified and directed by Engineer

M&L preparation of old wooden surface and applying one coat of synthetic enamel paint over etc complete all as specified and directed by Engineer

M&L for cleaning of service tank up to 2000 ltrs by removing all scales, dirt, silt, mud etc from tank and mouth of outgoing pipe including washing of tank internally with bleaching powder after removing scale, dirt, silt, mud etc from tank and removing algea from outside of tank from below bottom of tank and disinfecting tank by spraying sodium hypo chloride solution in tank and writing date of cleaning on tank with synthetic enamel paint size of alphabet / unmerical shall be minimum 7cm etc complete all as specified and directed by Engineer

Supply and fix in repair nahani trap with 100 mm dia grating incl 75mm dia PVC bend to fixing with drain pipe and floor tiles on broken area n.exc 1.00 sqm area in kitchen or bathroom etc complete all as specified and directed by Engineer

S&F in repair wall mixture, with provn for overhead shower etc complete all as specified and directed by Engineer-in-Charge Make : Cat Part No MSH1141 of Marc or equivalent in Plumber / ESS-ESS

Taking down aluminium doors / windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening etc complete all as specified and directed by Engineer Note : Broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock will be measured and paid separately under relevant items.

S&F in repairs concealed star lock powder coated for aluminium door/window fixed as per manufacturers instructions etc complete all as specified and directed by Engineer

S & F in repairs door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed etc complete all as specified and directed by Engineer

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer

S&F powder coated anodised aluminium fully glazed door shutters side hung type / sliding type with top channel and roller and accessary, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer (Note : Glass will measured and paid separately)

S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.55 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hinges type B-21 100mm long (2 No.) suitable handle (1 No) etc complete all as specified and directed by Engineer (Note : Glass will measured and paid separately)

S&F powder coated anodised aluminium glazed / gauzed window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer (Note : Glass / wire mess will measured and paid separately)

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sq. m in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and directed by Engineer

M&L plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3 & n.exc 6 Sq.cm of 2nd class hard wood etc complete all as specified and directed by Engineer

M&L plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 6 & n.exc 13 Sq.cm of 2nd class hard wood etc complete all as specified and directed by Engineer

S&F in 10 mm thick semi circular thughned glass for shelves/door in cornerwith chamferred edges incl connectedbrackets etc complete all as specified and directed by Engineer exc 0.35 m in radius

An amount of Rs 70,085.00 shall be deducted from BOQ on account of schedule of credit

M/S-B.R.SONAWANE

M/s A G Gund

Ms. M.D. Auty

M/S. M. F. Sharif & Co.

sunway associates

M/S. SHOURYA ENGINEERS AND CONTRACTORS

OM SAI ASSOCIATES

HG PATHAN CONSTRUCTION COMPANY

Manak landmarks

Arihant Construction