Construction of New public library at Jawagar Nagar

Amount

DISMANTLING WORK

Dismantling & removing the existing Reinforced Cement Concrete work etc., by using required mechinaries including stacking of steel bars and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge.

Dismantling brickwork manually by mechanical means including stacking of serviceaboe material and disaposal of unservice material within 50 meters lead as per direction of Engineer in charge.

Dismantling , removing and carefully stacking Doors & windows including removal of frames,hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Carting away surplus excavated earth and debris available with in the site is to be cleared away from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in- charge.

Dismantling & removing the existing Plain Cement Concrete work etc., by using required mechinaries and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge.

CIVIL WORKS

Providing and constructing cast in situ hydraulic bored piles of 600mm diameter in M30 grade concrete using blended cement - slag cement with minimum cement content of 400kg/m³ in accordance with the structural engineers drawings and directions, but exculding reinforcement including cost of mobalization of all necessary plants, equipment's like piling rigs, temporary casing of appropriate length for setting out cardinal points and the removal of the same, boring in overburden, using bentonite mud circulation technique or any other method duly through all strata upto the foundation level of piles etc., complete all as approved by the departmental engineer. Further include dewatering, placing concrete by tremie pipe method, disposal of bored material outside the site. Including Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing all the debris away from the site with out any extra cost as directed including the cost of all tools, plants, conveyance, all labour, lead and lift required

etc ., Conducting standard penetration test to identify the refusal strata for atleast 1 pile in group and atleast 25% of piles, comparing with refusal strata as indentified in soil report and providing socketting into refusal strata by 1.00mt or into hard rock by 100% dia of the pile. (Length of pile for payment shall be measured up to bottom of pile cap).

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum

Supplying and filling in foundation and basement with excavated soil other than sand in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive of giving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12"to a depth of 8" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc.,

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc.,Rate to include all materials, labour charges, wastages , placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Client / Engineer-in-charge.

Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members

For Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

for plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary

centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. Rate to include all leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer in charge

FOR FOUNDATION AND BASEMENT

IN GROUND FLOOR

IN FIRST FLOOR

IN SECOND FLOOR

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supply and constructing Fly ash Brick masonry in Cement Mortar 1:5 (One cement and Five M sand) in foundations, basement and superstructure using Fly ash Bricks of size 230x110x75mm etc. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

FOR FOUNDATION AND BASEMENT

IN GROUND FLOOR

IN FIRST FLOOR

IN Terace FLOOR

Supply and constructing Flyash Brick partition wall 115mm thick in Cement Mortar 1:3 (one cement and three M sand) 11.50 CM thick using using Fly ash Bricks of size 230x110x75mm including both side plastering with CM 1:5 12mm thick and using hoop iron reinforcement if found necessary and hoop iron shall be supplied to the department at free of cost etc., complete as directed by the Engineer in- charge.

GROUND FLOOR

FIRST FLOOR

Providing and laying weathering course on terrace in brick jelly lime concrete in ratio 1:2 ( I lime: 2 brick jelly ) the size of the brick jelly should not be more than 25 mm and not be less than 20 mm . The rate includes the cost of all material and labour inluding all lift and leads etc. complete and as directed by the Departmental Officers.

WATER PROFFING TOILETS AND OPEN TERRACE - Water proofing treatement for top surface and all side of sunken porton in the followingsequences including all labour. Materials, tools lead and lifts etc a) cleaning of RCC remove dust completely b). supply and application of cm 13 mixed with niobond SBF latex or equivalent polymer modified high quality cmulsion as a coving at the corners of floor and the vertical surface in the sunken area and between floor and walls in he remainig area c) apply first coat of brushbond RFX or equivalent acrylic polymar modified cementitious water proofing membrane coating on the prepared mofified cementitious water proofing membrance coating on the prpered surface in a contionous film on the sunken floor area vertical sutfaces up to finished foorlevel the coating also continued on the inner surfaces of the pipe penetration holes .

Finishing the top of roof with one course of Solar Reflective ceramic tiles of size 305 mm x 305 mm x 7 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Front Compound wall - Construction of 4½" thick walls using available good wire cut bricks with strength 30 - 50 kg sq cm of super structure above plinth level in cement mortor 1:4 ( 1cement :4 coarse sand ) including al leads and lifts for all floors supply and placing of 8mm hoop iron for every fourth course half brick masonry wall and providing lateral supports if length of the wall exceedinf 3m as per specifications including curing , scaffolding all materials in labour etc . complete at all floors levels incuding the cost of cement

Providing two legged scaffolding using 15cm dia casuarinas post of 4.0 m over all length of (3 M Height+0.5 M over all length (3.0M height +0.5m projection +0.5m in to the ground ) the distance between the two rows being 1.25M and the spacing of posts being 2.0M in both the rows with two horizontal posts with 0.5M overlap on either side and braces at 2.0M centre to centre including longitudinal and traverse middle braces to step up and transverse middle braces to step up and providing a plat form with country wood planks of 40mm thick and 1 M width ,etc in a complete form using coil and nails (Rate for an initial height of 3.0M and length of 1 M)

Scaffolding charges for every additional height of 2.5 M height over the initial height of 3 m.

Supply and fixing Shade net (Green Net) for under construction of high rise building

FINISHING WORK

Special ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, stair case steps, landing slabs etc with CM 1:3 (One cement and three P sand) 10mm thick including hacking the surfaces and providing necessary CM nosing, beading as per size specified wherever necessary using the same mix etc., complete complying with standard specification and as directed by the Departmental Officer.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of P sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. The rate including cost of all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering external walls with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Supply and laying flooring with best quality the following materials of Machine Polished granite slab not less than 18 mm thick (Jet Balck) in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, protection with Gypsum / POP layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Polishing and Nosing the Granite Slab To Half Edge to round shape and finishing the surface neatly etc. complete complying with standard specification as directed by department officers

JOINERIES

FOAMED PVC DOOR FRAME Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws hrough the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of (‘U’ channel of size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge point, frame nforcement of (‘U’ GI channel of size 46 x 22 x 0.6mm), bottom tie rod of (‘U’ GI channel size of 5 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work

ABS DOOR / EQUIVALENT Specification: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work

Providing and fixing 35mm thick Factory made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Sliding Door shutter moulded of different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges-3 nos for each shutter, 'D' SS pull handle 200 mm on both sides and SS tower bolt on one side with ISI make complete for finished

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 800x800x10mmthick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Executive Engineer before use on work

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Executive Engineer before use on work

Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Painting the new plastered walls with two coats for Interior Plastic Emulsion paint approved quality and colour over a priming coat, with two coats of wall putty including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete. The rate including cost of materials, brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting etc complete complying with relevant standard specification and as directed by the Departmental Officers

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 3.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance,welding charges, electrical charges, etc. complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for P.H.C using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification.(The make quality and colour of paint should be got approved by the executive Engineer before use on works.)

Providing and laying to required line and grade as per the drawing interlocking cement concrete blocks of M 30 grade 83 mm thick laid over the sand cushion . The size and the shape of the concrete blocks had to be approved before sourcing / manufacturing the same. The gaps between the two blocks shal be filled with relatively finer sand than the bedding sand of gradation as per Table 2 . The paver blocks shall be compacted using a light tandem roller or plate compactor till the required grade and line is achieved. The rate shall include laying of the bedding sand levelling , laying of paver blocks , filling of the filling sand and compaction etc. complete and as directed by the Departmental officers.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges et

Smooth Finish Cement Texture + Archi Concrete + Base Coat Texture +Top Coat Design Texture + Standing and Smoothing + Warter Base Pu Coating

PLUMBING & SANITARY WORKS

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of 110mm dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

Supply of Pvc Sintex water tank including cost of materials , conveyance and fixing charges etc.,

WATER SUPPLY WORKS

Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark,of the following sizes including cutting,Fixing to PVC specials using Adhesive including cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plasteringwherever necessary with necessary scaffolding charges. etc. complete and as directed by the Departmental Officers.

20mm CPVC pipe

25mm CPVC pipe

32mm CPVC pipe

Supplying & fixing in position first quality & approved variety of various dia C.P.V.C Ball Valves ( Heavy type) with I.S.I. Mark of the following size including cost of paste etc.,including labour for cutting and fixed to the Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements.

25mm dia CPVC valve

32mm dia CPVC valve

INTERNAL & EXTERNAL SEWAGE WORK

Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification. (Internal, External &Rain water system)

75mm dia PVC soil pipe

110mm dia PVC soil pipe

TOILET FITTINGS

Supplying and fixing of Oval Shape Wash Hand Basin of size 560 x 450mm, including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. (The Wash basin should be got approved by the Executive Engineer before use on works.

Unloading, receiving, storing, installing, testing and commissioning of approved make stainless steel sink of size 600 x 450 x 200mm, 40 mm waste coupling , sink cock with connection pipe, 1 nos angular stop cock for cold water, MS bracket for mounting the sink and painting the bracket with two coats of enamel paint of approved colour over a coat of primer etc. Complete.(Pantry) Note :- MS brackets cost not included in the PHE BOQ, The same is included in the Civil BOQ.

Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications.

Supplying and fixing best approved quality Porcelain Soap Dish of size 150mm x 150mm x 50mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.

Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Suppling and fixing in position 15mm diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Supply and fixing in position white European Water Closet of approved make with Porcelain low level flushing tank 12.5 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.

Supplying and fixing the best quality approved make of bip cock with C.P. health faucet wall hook one metre long flexible tube, angle cock with wall flange including cutting and making good the walls wherever required etc.complete, complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Executive Engineer before use on work.

Supplying and fixing White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge. (Make Jaguar URS-WHT-13253N or Equivalent)

Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).

Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron double gratings of size 150 X 150 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).

Constructing Brick Work Masonry manhole various size of deep in cement mortar 1:3(1Cement: 4 coarse sand ) R.C.C. Raft & top slab with cement concrete 1:2:4, plain cement concrete 1:4:8 mix for base course (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size )above that 150 mm thick RCC M25 raft slab inculding reinforcement 10mm dia 150mm c/c bothways. Plastering inside walls with 12 mm thick cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size), finished with a floating coat of neat cement ,supplying and fixing SFRC manhole cover with farame of size 600x600 mm , PVC foot rest as per detailed drawing etc the quoted rate shall also necessary excavation and back filling etc complete.complete as per standard design : (the chamber and cover should be got approved by the Executive Engineer before use on works) (SOR)

Supply and fixing RCC precast slab manhole cover SFRC of 50mm thick and required size 900mm x 900mm made in CM 1:3 Ratio both direction including cost and conveyance of all materials, labour and transportation etc complete complying with standard specification.

BORE WELL

Drilling of 12" dia vertical borewell so as to have a finished size of 6" dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractor's rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown including construction of mud pit etc. using only calyx rigs.

300mm (As per Twad Schedule Item No: WD-W0840, P.No:202)

150mm / 165mm (TWAD ,Unique code : (WD-W0834) P.No: 201

Reaming from 200mm dia pilot bore upto 350mm dia bore as direct by the Engineer incharge up to 80mtr depth ending below ground level. (TWAD,Unique code : (WD-W0807) P.No: 199

Upto 60 m depth ending below ground level (As Per SOR 2024-2025,Vol-II, Page No.199, Code.WD-W0794)

Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992 ( 1.1 (4,6,3), P.No: 22, Twad

200mm dia CS

150mm dia RS

Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers. (As per S.item no: 13a , p.no: 201)

200mm dia CS

150mm dia RS

Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock. upto 30m rock level

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including ransportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yieldtest by 'V' notch method. (TWAD, Unique code :(WD-W0839) P.No: 202

Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge.

Supply ,erection and testing & commisioning of 2HP submersible pumpset in the Open borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge.

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No.Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No.& Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc.The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.

Construction of Modular type RWH Structure capacity of 4.32 cu.m by using infiltration modules of size 800 x 800 x 360 mm and side wall with infiltration modules of size 800 x 360 x 25 mm including earthwork excavation in bitumen/concrete roads to a size of 1200 x 1200 x 3000 mm and providing base plate, Geo - textile 400mm - 200 micron, Fine filter media 12mm thickness, Coarse filter media 20mm thickness, FRP of 700x700mm (clear opening 600x600mm) (Grating cover with Frame - Medium duty 10 MT),including all labour charges, carting away and drilling bore well 150mm dia upto a depth of 3m with 125mm dia Blue slotted PVC Pipe.,complete.(Model 6)

INTERIOR FIT-OUTS

TABLES & STORAGES

Lending Counter with Side Table - F/installing in place Lending Counter of 600mm wide top with Side table of 450mm wide top, the table top, side verticals and front panel of side table made of 19mm thk. BWR ply. The front panel of the lending counter of height 1050mm is made of 25mm thk. BWR ply cut to shape as per design and fixed over 19mm thk. BWR ply backing. 25mm wide Louvre charcoal wood board is fixed over the 19mm ply backing as per design. The table tops are finished with 19mm thk. Granite of approved shade and the entire unit is finished with 1mm Laminate of approved shade and make on all sides. The edges are finished with 2mm thk. matching edgeband with rounded edges. Cost to include granite cutting, laying, edge rounding and polishing charges. The table size is 2.4x0.6x0.75m & 1.0x0.6x0.75m (as per Architects drawing)

Librarian Table with Side Table - F/installing in place Librarian table of 600mm wide top with Side table of 450mm wide top, the table top, side verticals and front panels made of 19mm thk. BWR ply. The entire unit is finished with 1mm Laminate of approved shade and make on all sides. The edges are finished with 2mm thk. matching edgeband with rounded edges. The table size is 2.1x0.6x0.75m & 1.2x0.45x0.75m (as per Architects drawing)

Back-storage for Librarian Table - F/installation back storage box made of 19mm thk. BWR ply with 9mm BWR ply backing. The mid-shelves and shutters made of 19mm thk. BWR ply. The exposed surfaces are finished with 1mm Laminate of approved shade and internal surfaces are finished with 0.8mm Laminate of matching shade. The edges are finished with 2mm thk. matching edgeband with rounded edges. The storage size is 2.9x0.45x0.75m (as per Architects drawing)

Computer Table inComputer section - F/installing computer table top and verticals made of 19mm thk. BWR ply with 9mm thk. BWR ply backing. The entire unit is finished with 1mm Laminate of approved shade. The edges are finished with 2mm thk. matching edgeband with rounded edges. The table size is 1.00x0.6x0.75m ( as per Architect's drawing)

Running Table in Reading Area - F/installing Running table top made of 25mm thk. BWR ply with leg supports made of 25mm thk. BWR ply double skin fixed at even spacing as per design. The entire unit is finished with 1mm Laminate of approved shade. The edges are finished with 2mm thk. matching edgeband with rounded edges. The table size is 4.67x0.6x0.75m (as per Architect's drawing)

Entrance Locker Storage (300mm depth) - F/installing locker storage box made of 19mm thk. BWR ply with 9mm thk. BWR ply back sheet. The horizontal and vertical mid-shelfs made of 19mm thk. BWR ply and fixed at equal spacing as per design. Individual shutters in 19mm thk. BWR ply are provided for all divisions and fitted with label holders and locks for safety and identification. All exposed surfaces are finished with 1mm Laminate of approved shade and internal surfaces are finished with 0.8mm Laminate of matching shade. The edges are finished with 2mm thk. matching edgeband with rounded edges. The storage size is 1.00x0.3x2.1m (as per Architects drawing)

Wall Racks with Angled Verticals in Reading Area (300mm depth) - F/installing Wall racks open storage box made of 19mm thk. BWR ply with 19mm thk. BWR ply backing. The centre vertical dividers made of 19mm thk. BWR ply are placed at an angle and horizontal dividers of 19mm thk. BWR ply fixed at varying spacing are provided as per design. The entire unit is finished with 1mm Laminate of approved shade. The edges are finished with 2mm thk. matching edgeband with rounded edges.

Pigeon Box type Wall Rack in Children's Area (300mm depth) - F/installing Wall racks open storage box made of 19mm thk. BWR ply with 12mm thk. BWR ply back sheet. The centre vertical and horizontal dividers are made of 19mm thk. BWR ply and placed at even spacing as per design. The entire unit is finished with 1mm Laminate of approved shade. The edges are finished with 2mm thk. matching edgeband with rounded edges.

Wall Racks in Children's Area (300mm depth) - F/installing Wall racks open running storage box made of 19mm thk. BWR ply with 12mm thk. BWR ply back sheet. The horizontal dividers are made of 19mm thk. BWR ply and placed at even spacing as per design. The entire unit is finished with 1mm Laminate of approved shade. The edges are finished with 2mm thk. matching edgeband with rounded edges.

Wall Racks in Children's Area (450mm depth) - F/installing Wall racks open running storage box made of 19mm thk. BWR ply with 12mm thk. BWR ply back sheet. The horizontal dividers are made of 19mm thk. BWR ply and placed at even spacing as per design. The entire unit is finished with 1mm Laminate of approved shade. The edges are finished with 2mm thk. matching edgeband with rounded edges.

300mm Depth Running Wall Racks in Reading Area - F/installing Wall racks open running storage box made of 19mm thk. BWR ply with 12mm thk. BWR ply back sheet. The horizontal dividers are made of 19mm thk. BWR ply and placed at even spacing as per design. The entire unit is finished with 1mm Laminate of approved shade. The edges are finished with 2mm thk. matching edgeband with rounded edges.

Cushioned Seating with Stoarge in Reading Area (450mm depth) - F/installation of Cushioned seating with storage, the box and midshelf made of 19mm thk. BWR ply with shutter fabricated out of 19mm thk. BWR ply and fitted with uplift hinges of Hettich / Hafele / equivalent make. The base is finished with 1mm Laminate of approved shade and edges finished with 2mm thk. matching edgeband with rounded edges. Granite skirting is provided and fixed flushed to the finished ply surface. The cushion top made of 100mm thk. Foam with 9mm BWR ply backing. The foam is cladded with Fabric of approved shade and color. The finished cushion top is placed on top of the base and installed in place to complete the unit. The cushion top to be removable for service purposes.

Multi-colored Cushioned Seating in Children's Area (450mm depth) - F/installation of Cushioned seating the base front-open box made of 25mm thk. BWR ply with necessary fastners for support. The front of the base is left open for storage. The base is finished with 1mm Laminate of approved shade and edges are finished with 2mm thk. matching edgeband with rounded edges. The cushion top is made of 100mm thk. Foam with 9mm BWR ply backing. The foam is cladded with Fabric of approved shade and color to match the base. The finished cushion top is placed on top of the base and installed in place to complete the unit. The cushion top to be removable for service purposes.

Janitor Storage in Toilet Lobby (450mm depth & 750mm height) - F/installation of janitor storage box made of 19mm thk. WPC sheet with 9mm thk. WPC sheet backing. The shutter and mid-shelves are made of 19mm thk. WPC sheet. The outer surfaces are finished with 1mm Laminate of approved shade and internal surfaces are finished with 0.8mm Laminate. The edges are finished with 2mm thk. matching edgeband with rounded edges. 19mm thk. Granite of approved shade is placed on top of the storage. The granite edges to rounded. Cut-out for SS sink is provided as per design. Rate to include cost of granite, fixing, transportation, edge noing and polishing charges. The size of storage is 2.4m x 0.45m x 0.75m (As per Architect's drawing)

PANELINGS & PARTITIONS

75mm Wooden Partition in Reception area- Fixing aluminum tubular sections 2" X 1" size and appx 1.5mm minimum wall thickness, vertical members at a spacing at 2'0" c/c except the end panels, where the spacing maybe less than 2'0" as per site condition. Horizontal members shall be fixed at floor, skirting approx 2', 4', 6' just above door top, i.e. 8' level from finished floor level. (One extra at the higher level when there is change in false ceiling level.) The aluminum frames shall be tied in position by 1 1/2" X 1 1/2" X 2.5mm thick aluminum angles, cleats of 1 1/2" long and screwed with four screws per angle by CP metal pan headed screws. The frame work is cladded with 12mm thick BWR ply. The ply is finished with 1mm thk. Laminate of approved shade and color. Painting cost not to be included in item.

Wooden dummy partition above Racks of depth 450mm for fixing AC - F/installation of dummy wooden partition fabricated with 2"x1" aluminium framework for support cladded with 19mm BWR ply on all sides. The ply surface is finished with 1mm Laminate of approved shade. AC routing to be concelaed in side the partition and necessary additional supports to be given to withstand indoor Split AC unit.

Wooden paneling above seating in Children's Area - S/installation of wooden paneling fabricated of 19mm thk. BWR ply double skin and cut to shape as per design. The panel is finished with 1mm Laminate of approved shade and edges finished with 2mm thk. matching edgeband. The finished panel is fixed in place on top of the seating with necessary hardwares.

12mm Toughened Glass fixed frame window embedded in Aluminium frame - S/erecting in place partition of 12mm toughened glass - Saint Gobain make - embeded in 50x50mm Aluminium powder-coated frames complete with necessary fittings and hardwares.

12mm Toughened Glass fixed frame window embedded in Aluminium frame - S/erecting in place partition of 12mm toughened glass - Saint Gobain make - embeded in 50x50mm Aluminium powder-coated frames complete with necessary fittings and hardwares.

12mm Toughened Glass embedded in Aluminium frame partition - S/erecting in place partition of 12mm toughened glass - Saint Gobain make - embeded in 50x50mm Aluminium powder-coated frames complete with necessary fittings and hardwares.

Wooden Wall Paneling in Reading Area - Paneling the wall with aluminum tubular sections 2" X 1" size and appx 1.5mm minimum wall thickness, vertical members at a spacing at 2'0" c/c except the end panels, where the spacing maybe less than 2'0" as per site condition. Horizontal members shall be fixed at floor, skirting approx 2', 4', 6' just above door top, i.e. 8' level from finished floor level. (One extra at the higher level when there is change in false ceiling level.) The aluminum frames shall be tied in position by 1 1/2" X 1 1/2" X 2.5mm thick aluminum angles, cleats of 1 1/2" long and screwed with four screws per angle by CP metal pan headed screws. The front side of the frame work is cladded with 9mm thick BWR ply. At the top of the paneling framework for 600mm dia arch is provided and cladded with 9mm thick flexiply. The ply surfaces are finished with 1mm thk. Laminate of approved shade and color.

Fluted Glass Divider for Tables in Reading Area - S/installation of 10mm thk. Fluted glass divider with rounded edges on top fixed on table top with 'U' clamp as per design. The divider size is 0.75x0.3m ht. (as per Architects drawing)

Gypsum false ceiling - Supplying and erecting the false ceiling with gypsum board suspended to the ceiling with commercial GI sections and suspenders as per the manufacturer’s specification and procedure metal expansion fasteners to be used for fixing soffit cleat to roof slab or beams at a distance of not exceeding 1220mm C/C. Main channel spacing at a maximum distance of 1220mm C/C max with soffit cleat. Perimeter channel fixed to ceiling section at 457mm C/C (max) to the above frame work, fixing one layer of Saint Gobain make 12.5 gypsum board screw fixed to the underside of the suspension grid, tapered edge board tapered edge boards tapered fibre tape and filled to give a smooth seamless ceiling all as per manufacturer’s specification and procedure complete.

True / Gypsum False ceiling painting - Preparing the ceiling surface with necessary scraping and application of 2 coat putty, 1 coat primer and 2 coats of finishing premium emulsion paint - Asian Paints make - to achieve a smooth painted surface.

Wall painting - Preparing the walls with necessary scraping of existing layer of paint from walls and application of 2 coat putty, 1 coat primer and 2 coats of finishing Royale emulsion paint - Asian Paints make - to achieve a smooth painted surface.

Wooden Coffer Ceiling above Reception (300mm height) - S/installation of wooden ceiling above Lending counter the coffer ceiling pattern made of 19mm thk. BWR ply with 19mm thk. BWR ply back sheet and suspended from the true ceiling with commercial GI sections and suspenders as per the manufacturer's specification and procedure metal expansion fasteners to be used for fixing soffit cleat to roof slab or beams at a distance of not exceeding 1220mm C/C. Main channel spacing at a maximum distance of 1220mm C/C max with soffit cleat. Perimeter channel fixed to ceiling section at 457mm C/C (max) to the above frame work. The Wooden ceiling is finished with 1mm Laminate of approved shade and the edges are finished with 2mm thk. matching edgeband with rounded edges.

Wooden False Ceiling above Running Counter in Reading Area - S/installation of plain wooden ceiling above Running counter made of 12mm thk. Ply suspended from the true ceiling with commercial GI sections and suspenders as per the manufacturer's specification and procedure metal expansion fasteners to be used for fixing soffit cleat to roof slab or beams at a distance of not exceeding 1220mm C/C. Main channel spacing at a maximum distance of 1220mm C/C max with soffit cleat. Perimeter channel fixed to ceiling section at 457mm C/C (max) to the above frame work. The Wooden ceiling is finished with 1mm Laminate of approved shade.

12mm Toughened Glass Door embedded in MS Frame ( 1.0m x 2.4m - 3nos ) - P/fixing of single pane 12mm toughened glass door - of Saint Gobain make - embeded in 50mm x 50mm MS powder-coated frames of approved shade in Geze or equivalent make complete with necessary fittings - floor spring, door closer, 600mm ht. H-handle, locks etc. of Geze / Ozone / Dorma XLC make.

12mm Toughened Glass Door embedded in MS Frame ( 1.50m x 2.4m - 1nos ) - P/fixing of double pane 12mm toughened glass door - of Saint Gobain make - embeded in 50mm x 50mm MS powder-coated frames of approved shade in Geze or equivalent make complete with necessary fittings - floor spring, door closer, 600mm ht. H-handle, locks etc. of Geze / Ozone / Dorma XLC make.

12mm Toughened Glass Door embedded in MS Frame ( 1.80m x 2.4m - 1nos ) - P/fixing of double pane 12mm toughened glass door - of Saint Gobain make - embeded in 50mm x 50mm MS powder-coated frames of approved shade in Geze or equivalent make complete with necessary fittings - floor spring, door closer, 600mm ht. H-handle, locks etc. of Geze / Ozone / Dorma XLC make.

FLOORING

Decorative Vinyl Flooring in Children's Area - S/laying of 3mm thick Vinly flooring (roll type) over tile flooring in pattern as in design with necessary adhesives. Cost includes laying and wastage.

Table with Wooden Legs in Reading Area. 2"dia Wire manager to be provided on top - Supply and installation of Wooden table, 38mm thk. Top made of doubly pressed 19mm thk. BWR ply and finished with 1mm Laminate of approved shade and make. The top edges to be finished with 2mm thk. matching edgeband with rounded edges. 2"/3" thk. carved wooden legs of approved design as per drawing are fixed at the corners of the table top as per drawing and finished with duco Matt polish of approved shade and color. 2" dia ss wire manager is provided on top as per drawing.

3 Seater Table

2 Seater Table

Round Table with Wooden Legs in Children's Area - Supply and installation of 2062mm dia Round Wooden table made of 8 individual top pieces each 38mm thk. Top made of doubly pressed 19mm thk. BWR ply and finished with 1mm Laminate of approved shade and make. The top edges to be tapered and curved at the edges as per drawing and finished with 2mm thk. matching edgeband with rounded edges. Table top of 2062mm dia as per drawing and design. 2" thk. carved wooden legs of approved design as per drawing are fixed at the corners of the each table top as per drawing and finished with duco Matt polish of approved shade and color. 2" dia ss wire manager is provided on top as per drawing.

Medium-back Mesh Office Chairs - Supply amd installation of Medium back mesh chairs with Gas lift, Synchro tilt mechanism and foam cusion seating installation complete.

Medium-back Rattan Wooden Chairs for Running Counter - Supply and installation of existing medium-back rattan wooden chairs available at site after necessary proper repairing, refurbishing, sanding and duco Matt polisihing works.

Round Pouff Chairs in Children's Area - Supply and installation of round pouff seating in Children's area of 700mm dia and 330mm height as per drawing with metal frames and PU molded cushion upholstered with 2" foam and fabric of approved texture, shade and color.

3-Seater Medium-back Sofa with Metal Legs in Reception Area - Supply and installation of medium-back 3 seater sofa with cushion handrest and metal legs for ground floor Reading Area with 40 density foam for handrest, back and seat of size and design as per drawing and finished with fabric of approved texture, shade and color as per design. Basic cost of fabric Rs.1100-2200 per metre. MS legs in shape as per drawing and in black powder coated finish are provided as per design.

2-Seater Medium-back Sofa with Metal Legs in Reception Area - Supply and installation of medium-back 2 seater sofa with cushion handrest and metal legs for ground floor Reading Area with 40 density foam for handrest, back and seat of size and design as per drawing and finished with fabric of approved texture, shade and color as per design. Basic cost of fabric Rs.1100-2200 per metre. MS legs in shape as per drawing and in black powder coated finish are provided as per design.

Mosquito Catcher - Supply and installation of 240W wall / floor mount corded commercial electric flying insect killer machine with catchment tray.

Assorted Wall Paintings - Supply and installation of decorative artwork printed in canvas / high quality thick premium glossy photo paper and encased in wooden frames of approved design, shade and color with 4mm thick glass in front of artwork as per design.

Photo Frames behind Lending Counter - Supply and installation of photos of tamil leaders printed in high quality thick premium glossy photo paper and encased in wooden frames of approved design, shade and color with 4mm thick glass in front of photos as per design.

Planter Box in Reception Area - Supply and installation of fibre molded planter box of 300mm depth and 450mm height for 1350mm length finished in approved shade and color as per design.

Planter Box in Reception Area - Supply and installation of fibre molded planter box of 300mm depth and 450mm height for 1350mm length finished in approved shade and color as per design.

Entrance Floor Mat - Supply and installation of 2m x 1m Floor mat for the front entrance area on the floor.

Water dispenser - Supply, installation, and commissioning of Blue Star, model no.BWD3FMRGA or equivalent, hot ,normal & cold dispenser machine with refridgerator bottled water dispenser of 20L capacity with drip tray and other necessary accessories.

Wall Clock - Supply and fixing of wall mounted round/square Analog clock of approved design.

ELECTRICAL WORKS

LT CT TNEB METER BOX: CT Metering Panel - Supply, installation, testing and commisioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS channels, fasteners, etc., including all associated control wiring. 1set of 200/5A CT with TNEB Metering provision and 1nos of 200/5A CT for APFCR.

250A Isolator Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of 250A TPN MCCB panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, (As per quotation)

Supply, Installation, testing and commissioning of 3Phase, 415Volts, Main LT Panel board of Indoor, Cubicle floor mounting type made out of 14 SWG CRCA sheet steel with powder coated finishing, MS base frame, double internal earthing arrangements, 200Amps, rating TPN Copper busbars and Earth bar with interconnection busbar, etc., comprising of the followings: EB Incomer :1 No. 200Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOM DG Incomer: 1 No. 200Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOM Common C/O Incomer: 1 No. 200Amps, 4Pole Automatic Changeover Switch with EB ON and DG ON LED Indication lamps Metering : 2 Set of RYB LED Indication lamps 2 Nos. of Multifunction Meter with RS 485 2 Set of Current Tranformers (200/5A, Cl-1), 1 No. 200/5A CT for APFCR,2 Set of Control MCB and Electrical Interlocking between EB & DG Incomers

Outgoings: 2 Nos. 100A, 25kA, TP+N, TM MCCB with Ext. RHOM (APFCR & Spare) 5Nos. 63A, 25kA, TP+N, TM MCCB with Ext. RHOM , 6 Nos. 32Amps TP+N, MCCB (As per quotation)

Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm.with the following in flush with wall with earth connection only. i.63A 4P MCB - 1 no. ii.63A 4P 30MA RCCB/ELCB - 1 no. iii.63A DP MCB Isolator -3 nos. iv.6A to 32A SP MCB - 18 nos.

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Clamping of 3 1/2 core x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 4 core x 16 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 4 core x 16 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 4 core x 16 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 2/ 4 x 16 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) Higher End )Primary Point.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) Higher End Secondary Point.

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply, fixing, testing & commissioning of 22W LED ceiling surface mounted - indoor luminaire with soft & uniform light distribution. Dimension : 177mm X 43mm. Luminaire made of die-cast aluminium for better thermal management. Luminaire body finish with White expoxy polyster Powder Coated. High efficiency diffuser for glare free, uniform light distribution. Luminaire assembly integrated with constant current LED driver. Cable entries for through-wiring of mains supply cable Prewired with LED driver and suitable for operation on 240V, 50Hz single phase ac supply. Operating voltage range (90 - 265V AC). LED driver efficiency should be greater than 85% with CRI greater than 80 and with colour temperature 4000K range. LED having 54,000 burning hours with minimum 70% lumen maintenance and power factor > 0.9 with THD less than 10% & UGR < 19 complaince to LG7 guidelines. SDCM≤3. System consumption should be 22W LED fixture with lumen package of 2497 lumens (110 lm/W). The luminaire shall be

Supply, fixing, testing & commissioning of 40W LED Pendant (Direct)- indoor luminaire with soft & uniform light distribution. Luminaire made up of Extruded aluminium with Die Cast End Caps - powder coated finish in RAL9004 Signal Black fine texture I RAL9016 Traffic White fine texture I RAL 9007 Grey aluminium fine texture. Dimension :1188mm X 36mm X 75mm with Standard suspension kit 1Mtr/2Mtr. Diffuser / Lens material : Polycarbonate & Secondary Refelector Hexa-Cell (Matte Black).Cable entries for through-wiring of mains supply cable Prewired with LED driver and suitable for operation on 240V, 50Hz single phase ac supply. Operating voltage range (90 - 265V AC). LED driver efficiency should be >85% & Optical efficieny >90%, CRI greater than 80 and with colour temperature 4000K range. LED having 60,000 burning hours with minimum 70% lumen maintenance and power factor > 0.9, UGR < 16, SDCM≤3. Surge Protection : 4kV-6kV. System consumption should be 40W LED fixture with lumen package of 1835 lumens (100 lm/W). The luminaire shall be wired with PVC unsheathed copper leads from terminal to the fitting. Luminaire should have NABL Certificate on Resitance to Flame & Ignition as per IS 10322 Part-1:2014. Mandatory CE Marking & BIS Certified. Make: K-LiTE (Model No. 3456) or equivalent.

Supply, fixing, testing & commissioning of 8W In-ground LED luminaire with Die-Cast Aluminium housing with clear toughened glass diffuser and 316 grade Stainless steel front ring with operating voltage range (150 - 270V AC). LED CRI greater than equal to 80 and with colour temperature 2700K range. LED having more than 60,000 burning hours. The luminaire shall be IP67 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: Product should have Narrow beam, Moisture arrestor, IP 68 Connector for on site connections. Luminaire should have Anti Glare Visor Honeycomb assembly. Make: K-Lite or Equivalent.

Supply, fixing,testing & commissioning of Nebula Midi 12W Inground spike / Die-Cast Aluminium bracket mounted LED cylindrical luminaire with Die-Cast Aluminium alloy housing with clear toughened glass diffuser with operating voltage range (100 - 300V AC). LED driver efficiency should be greater than 80% with CRI greater than equal to 80 and with colour temperature 3000K range. LED having power factor more than 0.95 with THD less than 10% & Surge protection 4kV. The luminaire shall be IP66 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: Product should have Moisture arrestor and IP 68 Connector for on site connections. with Foundation.Luminaire should have Anti Glare Visor + Honeycomb assembly. Make: K-Lite or Equivalent.

Supply, fixing, testing & commissioning of 6W / 2x6W Wall mounted LED wall luminaire with Extruded & Die-Cast Aluminium body with clear toughened glass diffuser and Mirror finish pure Aluminium reflector. Operating voltage range (100 - 300V AC). LED driver efficiency should be greater than 80% with CRI greater than 80 and with colour temperature 3000K range. LED having power factor more than equal to 0.95 with THD less than 15% & Surge protection 4kV. The luminaire shall be IP65 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Make: K-Lite or Equivalent.

Supply, fixing, testing & commissioning of 16W Bollard with 900mm Height concrete pedestal luminaire designed for surface mounted. Symmetrical light distribution. Luminaire made of square extruded aluminium tube (grade 6063) with pressure die cast aluminium components of high corrosion resistance and non corrosive stainless steel fasteners. Clear polycarbonate diffuser. Pressure die cast aluminium mounting plate 121 square x 4mm thick with 3 elongated holes 15 x 10 to suit M8 bolts at PCD 70 with pure polyester powder coating.The base plate have a cable entry hole of 30mm dia at the center. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially

ensuring firm grouting into the specially designed foundation. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.9, THD <10%, Surge protection 4-6KV. Luminaire dimension : 121mm square x 970mm height. CE & BIS Certified. Inhouse NABL accredited lab. KLite Model No. KL4726

Supply, fixing, testing & commissioning of 60W Juno Gate Lite. Beam angle 120°. Luminaire made of spun aluminium, integrated with extruded aluminium pipe along with pressure die cast aluminium base through supporting arms made fo gravity die cast aluminium and non corrosive stainless steel fasteners. Diffuser placed into the provision formed on the pheriphery of the bottom cover. Translucent acrylic diffuser. Suitable for mounting on Ø60mm OD pipe. Protection class IP65. Mechanical resistance IK07. Pure polyester powder coated RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >88%, Power factor >0.95, THD <10%, Surge protection 6KV. Luminaire dimension : 600mm diameter x 443mm height. CE & BIS Certified. Inhouse NABL accredited lab.K lite No.KL 5040 (Rate as quotation)

Supply and fixing of 1200mm(48") sweep A ceiling fan - - complete with stepped electronic 300W regulator with 600mm down rod with fan clamp with side plates and cross arm of size 450mm(18")

Supply and fixing of 300mm (12") sweep(Heavy Duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep AC exhaust fan

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and erection of Copper plate earthing station with GI pipe, 600x600x3mm thick copper plate, salt, charcoal, etc., including civil works, heavy duty CI Cover, etc., as per IS 3043 standards. (Rate as per quotation)

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and Run of 1 of No.8 SWG copper wire for earth connection

Supply and Run of 1 of No.8 SWG copper wire for earth connection

The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fasteners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements. The rate shall inclusive of necessary Wedge anchors threaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc, (8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement )

Perforated type Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300 mm width and 50mm height

Perforated type Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150 mm width and 50mm height

Supply and fixing of Raceways Metal / GI with 150mm width x 38mm height with Suitable Fixing bracket and Siutable Coupler Jiont with Connected all accessories complete work.

Supply and fixing of Raceways Metal / GI with 150mm width x 38mm height with Suitable Fixing bracket and Siutable Coupler Jiont with Connected all accessories complete work.

Construction of inspection chambers of following sizes 60 x 60 x 60cm with earth work excavation for foundation with 23cm thick brick jelly cement concrete bed in C.M.1:4:10 using 40mm Brick jelly for foundation, brick work in C.M.1:6 for chambers, plastering with C.M.1:3 12mm thick, benching, channelling, 75mm thick RCC loose slab covering in C.M.1:2:4 mix using 20mm blue granite jelly including necessary reinforcement, etc., complete .

7.5KVA UPS Supply, erection, testing and commissioning of the following rating of UPS Systems for emergency lightings. Supply of Micro Processor Controlled 7.5 KVA UPS and input supply of 430 Volts ± 15%, 3 Phase, 50 Hz ± 5% and an out put of 230 Volts ±1%, 1 Phase 50 ± 0.01 Hz consisting of Rectifier, Out put Isolation Transformer, Battery Circuit Breaker, Static and Manual Bypass Switches and all others accessories required as per detailed specification .The system should be suitable for independent mode of operation.Supply of Sealed Maintenance Free Batteries to support 7.5 KVA for 6 hrs complete with intercell connectors, battery stand made out of Powder Coated MS Angles with adequate supports to carry the load of the batteries as per specification. Installation,Testing and Commissioning of complete 1 nos 7.5 KVA UPS system in Independent mode of operation with the battery bank including inter connection of UPS and battery banks with adequate size of copper cable, lugs etc. complete as required.

Supply and erection of '2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS (5 NOS)

Supply of First Aid Box complete with all First Aid Medicines (M-1977)

Supply and fixing of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

Supply and fixing of Shock Treatment chart with Glass frame

Supply and fixing of Fire Extinguishers Co2, 4.5Kg confirming to TAC norms

Supply and fixing of Metallic Danger Board as required by the Electrical Authorities

Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply ,consisting 230/24 volt SMPS unit, 2Nos.of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard method sand as directed by the Departmental Officers.(Make: Ravel / Equivalent)

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers.

XEROX MACHINE: Supply, installation, testing and commissioning of A3 Xerox 5855 Photocopier machine, Multi-function, Windows 11, laser printing with multiple features like Print, Scan, Copy, 2-sided ouput, Network connectivity, print speed upto 55 pages per minute, print resolution upto 4800x1200 dpi and paper capacity 46000 sheets (standard) / 8700 sheets (max with optional feeders)(Rate as per Quotation)

DESKTOP PC: Supply, installation, testing and commissioning of Dell Inspiron 27" All-in-One Desktop PC of following specifications: 1. Processor: Intel Core7 150U (12MB cache, 10 cores, 12 threads, upto 5.4 GHz Turbo) 2. Operating System: Windows 11 Home Single Language, English 3. Graphics Card: NVIDIA GeForce MX570A with 2GB GDDR6 graphics memory 4. Monitor: 27", FHD 1920x1080, 60Hz, WVA, Touch, InfinityEdge, Narrow Border 5. Memory: 16GB: 2 x 8GB, DDR4, 3200 MT/s 6. Storage: 1TB M.2 PCle NVMe Solid State Drive 7. Color: Pearl White Cover + Molded Speaker Grill (for Touch LCD) 8. Microsoft Office: Microsoft Office Home and Student 2021 9. Security Software: McAfee LiveSafe 1-year (5-device) 10. Keyboard: Dell Pro Wireless Keyboard and Mouse - Dell KM5221W White 11. Wireless: Intel Wi-Fi 6E AX211, 2x2, 802.11ax, Bluetooth wireless card 12. Power: 90W AC adapter, 4.5mm barrel 130W AC adapter 4.5mm barrel (Rate as per Quotation)

PRINTER: Supply, installation, testing and commissioning of HP Smart Tank 790 WiFi All-in-One Printer Duplexer with ADF and Magic Touch Panel Inkjet Colour printer, print speed 11-20 sheets with multiple features like print, scan, copy, fax, multi-port connectivity (Hi-speed USB 2.0, Wifi, Bluetooth LE , 1 USB Host, LAN) , 2.4/5G dual band Wi-Fi, Wi-Fi Direct, mobile printing capability, etc(Rate as per Quotation)

Supply, Installation, Testing and commissioning of 32 channel 2 SATA NVR, with 8TB Hard Disk Drive 2 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K (3840 × 2160) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface

for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the play back efficiency,Supports VCAsearch for fire/ ship/ temperature/ temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony.

Supply, Installation, Testing and Commissioning of 32" smart LED TV with following specifications a) Full HD 4K monitor b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). (Rate as per Quotation)

CCTV SYSTEM

Supply, Installation, Testing and commissioning of 32 channel 2 SATA NVR, with 8TB Hard Disk Drive 2 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K (3840 × 2160) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the play back efficiency,Supports VCA search for fire/ ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony.

Supply of 4MP, Internet Protocol fixed BULLET CAMERA/DOME CAMERA (INDOOR & OUTDOOR)with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/ SDHC/ SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse.with Camera Stand.(Make: Dahua/ Panasonic) (Rate as per Quotation)

Supply, Installation, Testing and Commissioning of 32" smart LED TV with following specifications a) Full HD 4K monitor b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). (Rate as per Quotation)

Supply and Clamping of CAT 6 unarmoured cable in suitable PVC Pipe 1" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T;100Base-T;1000 Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 24 port switch with two uplink port, 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803. af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward/Max packet size: 10kbytes/Wide range power design (1256VDC) / Operating temperature (-40 ̊C~ +75 ̊C) /Reverse polarity protection/Resettable fuse to protect against over current/IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK)

Supply and fixing of POE 8 port switch 10/ 100 /1000 Base -T / 2 x 1000Base-FX/20Gbps band width /IEEE803. af/at compliant PoE+/ RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex /Store and forward / Max packet size: 10kbytes/ Wide range power design (12~56VDC)/ Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.(Make: DLINK,NETGEAR/ TPLINK)

Supply and Fixing of Rack with Accessories -Higher end 12U Rack with fan extra for the above rack. (speaker/data/cctv)

Supply and Fixing of Rack with Accessories -Higher end 12U Rack with fan extra for the above rack. (speaker/data/cctv)

Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up and battery stand.

Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges. ( Rate as per quotation )

Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges. ( Rate as per quotation )

PA SYSTEM

Supply, Installation,Testing & commisioning of 240 watts P.A Booster Amplifier with the output power of 240 watts maximum, 240watt rms at 10% Thyristor harmonic distortion(THD), 240watt RMS at 5% THD, 240 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 7 to 16kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja /Bosch or its equivalent)

Supply, run, testing and commissioning of 2Core x 1.5sq sqmm PVC insulated Unarmoured Speaker Cable in suitable 25mm dia Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour.

Supply, Installation, testing and commissioning of 1 x 100KVA, Silent type Diesel Generator Set with AMF Panel complete with suitable size Acoustic enclosure Diesel Engine suitable for Generator application, developing 1500RPM with an overloading capacity of 10% for one hour in any 12 continuous hours operation generally confirms to BS:5514, directly coupled to 100KVA at 0.8 Power factor, 415V, 3Phase , 4wires, 50cycles per second self excited, self regulated, with brushless excitation, Alternator generally confirms to BS:5000/IS:4722. DG set shall be complete with radiator, residential type silencer, electronic governor, cable termination box, MS mounting frame, fuel piping, diesel day tank, 24VDC Battery, Battery mounting frame, oil level indicator with gauge board, and all other accessories as per standard specifications. 'Diesel Generator set shall be mounted on cushy foot or similar type of vibration Isolators. The cost of 12 Mtr Exhaust pipe shall be included in this item with Sutable concrete Base at M30 Grade. The DG Set shall be suitable for auto-mains failure start and auto /manual operations. The DG Should be supplied with Auto-Start-Stop Control panel with suitable rating switchgear.

14 HP VRF - Top Discharge Outdoor Unit Supply, Installation, testing and commissioning of VRV/VRF air-conditioning system Cooling only comprising of Modular type high efficiency DC Scroll / Twin Rotary Multiple Compressor with DC inverter, High efficiency heat transfer Cooling Coil suitable for Environment friendly HFC R410A / R407C refrigerant, Air cooled propeller type condenser fan with DC motor drive, interconnecting piping, insulation etc., Micro-processor control panel suitable for automatic operation, High speed calculation inverter control, active oil control mechanism incorporating all safety functions as per technical specifications & other points listed below. Unit shall have a minimum of 2 compressors. And each compressor shall run independently even though there is a failure in the other compressor.The unit mounted starter panel shall be complete with IP-55 protection consisting of power disconnecting switches with fuses, soft starters, for compressor motors, under/over voltage trip, single phase preventers, communication card which can accept 4-20 mA or 2-10 Vdc analog signal. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

2 TR Split Type AC Unit Supply, Installation, Testing and commissioning of HI Wall units. All the units should be supplied with Cordless remote control and Refrigerant Y joints with fixing arrangements, etc., (Capacity : 2TR)

1.5 TR Split Type AC Unit Supply, Installation, Testing and commissioning of HI Wall units. All the units should be supplied with Cordless remote control and Refrigerant Y joints with fixing arrangements, etc., (Capacity : 1.5TR)

1.0 TR Split Type AC Unit Supply, Installation, Testing and commissioning of HI Wall units. All the units should be supplied with Cordless remote control and Refrigerant Y joints with fixing arrangements, etc., (Capacity : 1.0TR)

Supply and Installation of Refnut joints with all accessories (M-2060)

Supply and Installation of 20G Hard drawn copper pipe with nitrile rubber insulation and necessary supports

Supply and Installation of Communication cable between indoor and outdoor units with PVC Conduit and fittings

Supply and Installation 25mm Dia HDPE PVC Pipe condensate Drain pipe with insulation and fittings

Supply, Installation, Pressure Testing and gas charging R410A Refridgerant gas

S J INFRA (BID ID -1377484)

SM Construction (BID ID -1377507)