REPAIR/REPLACEMENT OF JOINERY SUCH AS DOORS, WINDOWS, VENTILATOR, ROLLING SHUTTERS, CUPBOARDS AND CURTAIN RODS IN OTM/OR/JCOS MD ACCN UNDER GE (MCTE) MHOW

Amount

Taking down shutters of any description n.exc 1 Sqm each all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each all as specified and directed.

Taking down Aluminium frame with aluminium shutters (without taking off shutters from the frame) area not exc 1.5 Sqm each complete all as specified and directed.

Taking down Aluminium frame with Aluminium shutters (without taking off shutters from the frame ) area exc 1.5 Sqm but nexc 4.0Sqm each complete all as specified and directed.

Taking down Aluminium shutters of any description n.exc 1 Sqm each all as specified and directed.

Taking down Aluminium shutters of any description exc 1 Sqm and n.exc 2 Sqm each all as specified and directed.

Taking down Aluminium Door panel/window panel and tightening of door, easing ,replacing of joining cleats/ glazing clips/ rubber neoprene packing / snap beading screws, etc if required and re- fixing to the existing frame complete all as specified and directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land.

S & F mild steel work angle or flat iron section in hold fasts for door/window chowkats including two coats of red oxide primer complete all as specified and directed.

S & F second class hard wood plain, solid, straight chawkats and frames, wrought, framed rabated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as directed and specified.

S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) and as directed.

S & F 30mm thick, second class hard wood, factory made, glazed and skeleton window shutter open rebated prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers including cut and mitred beads for securing glass or wire mesh etc. for windows, the size of members as specified in SSR-2009 Part I clause No 8.20(b) and as specified.

S & F Window ECO 4000, supply and fixing of double rebate openable/fixed window made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 micron thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge. MAKE: NCL Alltek and seccolor LTD, Ashwani & Sons or equivalent make as approved by the GE.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Providing and fixing of powder coated aluminium three track sliding glazed window manufactered with approved aluminium section with three sliding shutter each shutter width one half of the length of window with the following specification a shund making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40mm x 1.5mm thick. (b) Three way track for sliding shutters of cross sections 91.80mmx 31.75mm x 1.1mm thick. (c) Sliding shutter frame of cross section 40 x18 x 1mm (d) Aluminium glazing strip size 18.2 x 16.66 mm (e) 4mm thick float glass superior quality for 2 shutters. (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter rollers 01 Nos. (h) 02 Nos sliding rollers per shutters. (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window.

Providing & fixing powder coated aluminium door frame of approved manufactured of following sizes fixed to floor, wall with raw plug and screw complete in all respect and as directed by Engr-in-Charge. (a) Door frame of size 95.25 mm x 44.45 mm x 1.5 mm

S & F Aluminium partition wall fixed glazing/panelling with top, bottom and middle 100 x 45 x 2mm thick with 5.5mm tinted glass /PVC panelling with sash bars including necessary packing, anodised snap beading screw complete all as specified and directed and as per sample kept in GE office and approved by GE

M&L Pre-laminated particle board, Exterior grade 18/19mm thick, pre-laminated both side with decorative choice lamination and 3mm thick teak wood edging of all around all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thicknes, size, quality or desctiption) from metal frame including punching or drillilng out old glazing pins/spring clips and providing and fixing new ones

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square/rectangular n.exc 0.50 sqm in each panes complete all as specified and directed.

S&F 4mm figured glass pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples/beeds complete all as specified and directed.

S&F Butt hinges 100mm mild steel cold rolled, medium weight all as specified and directed.

S&F Butt hinges 75mm mild steel cold rolled, medium weight all as specified and directed.

S&F 150mm long aluminium, anodized barrel tower bolts of extruded section all as specified and directed.

S&F 100mm long Aluminium, anodized barrel tower bolts of extruded section all as specified and directed.

S&F in 100mm long aluminium anodized handles cast type anodised all as specified and directed.

S&F 150mm long aluminium handles, cast type anodized all as specified and directed.

S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring) all as specified and directed.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F in repairs Stain less steel brackets for suitable 25mm dia curtain rods all as specified and directed complete .

S&F 25mm dia Stainless steel curton rod fixed complete all as specified and directed.

S&F in repair Aluminium (Die cast) body, Door closer hydraulically regulated, designation No 1 universal type suitable for door shutters upto 700 mm in width and of weight not more than 35 kg all as specified and directed.

S&F in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover ,governing pivot made of brass other parts made of mild steel heavy duty and fixed all as specified and directed.

Preparation of new surface of wood and wood based materials of any description or girth not otherwise described and treated two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Preparation of New Steel surface and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm width or girth all as specified and directed.

Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick all as specified and directed.

S&F frame work such as grills, gratings etc with ends of bars shoulders and or reverted or forged into spikes, framed guard bars and similar work conferming to FE 410-0 or Fe 310-0.

M & L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement all as specified and directed.

M&L Preparing of New surface of wall and applying two coats of distemper oil bound over chalk whiting priming coat all as specified and directed.

M&L Preparation of Newly plastered surface and applying three coats of white wash on Walls all as specified and directed.

M & L for Running welding in repairs thickness of metal to be welded n.exc 6mm complete all as specified and directed.

S & F in repairs steel windows or ventilators with side hung shutters including box type friction hinges, steel handle, steel peg stay and glazing bars welded complete all as directed and specified.

M/S GARG CONSTRUCTION

S.S. Engineers

SAHYOG ELECTRIC

AGARWAL BUILDERS

ram prashad chotelal batham

AVINASH ENTERPRISES

M/S Ashish Construction

Chitragupta Construction