Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-Finance 0 SHOP NO 48 BHAGAT SINGH COMPLEX VYAPAR VIHAR ROAD CAR PLANET VYAPAR VIHAR BILASPUR BILASPUR CHHATTISGARH 495001 | BILASPUR | CHHATTISGARH | 495001 | ₹28.0 L | L1 | Accepted-Finance L1 |
| 2 | L2₹29.7 L+₹1.7 L (6.12%)Rejected-Finance | ₹29.7 L+₹1.7 L (6.12%) | L2 | Rejected-Finance L2 |
| 3 | L3₹35.2 L+₹7.2 L (25.8%)Rejected-Finance R O 218 05 OPP J D A COMPLEX TRIKUTA NAGAR JAMMU J K PIN 180020 | JAMMU | JAMMU AND KASHMIR | 180020 | ₹35.2 L+₹7.2 L (25.8%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | EAST URBAN ENGINEERING L2 | M/S ZTECH L3 | Sona Enterprises L1 |
|---|---|---|---|---|---|---|
| 1.00 | Material and labour Weather proof outdoor bus bar chamber cum LT panel, made out of 3.15 mm thick MS sheet with front & rear Opening, powder coated, dust & vermin proof, IP-66 Protection comprising 4 Nos aluminium strips each of 400 Amps, 60cm long having 10cm min distance from the body, duly insulated mounted on epoxy insulators in horizontal position in stepped manner with 4 No’s mounting legs made out of 40mm x 40mm x 6mm angle iron grouted in PCC block (30cm depth below ground level and 60cm above ground level) in cement concrete 1:3:6, type C-2 (using 40mm grade crushed stone aggregate), and connections with size of aluminium thimbles, nuts, bolts & washers including cable glands at entry and outlet points with one MCCB of 250 Amps 25 KA, 4 pole as incomer of the bas bar with taking down the existing all cables, dressing the cable properly with lugs, nuts, bolts washer etc. & refixing the same including excavation and earth work, returning filling and removal of surplus soils complete all as specified and directed by Engr-in-charge. | 1 | Each | 48,000 ₹48,000 | 23,000 ₹23,000 Lowest | 37,000 ₹37,000 |
| 2.00 | Factory made LT distribution panel out door,CPRI approved, made out of 3.15 mm thick MS sheet, powder coated, dust & vermin proof, IP-66 Protection, Outdoor type factory made cubical totally enclosed type with front and rear door opening as per engineering practice provided with locking arrangement for opening of panel with provision of seperate chamber in upper part to encloser Copper busbar of cap 400 Amps fixed in steped manner on epoxy insulators in horizontal position with min 10cm distance between each busbars & panel body and 06 Nos seperate chambers of adequate size embedded in 40mm thick PCC 1:2:4 type B-1 (using 20mm graded aggregate), on angle iron of size 40x40x6mm with footing 30 cm clear space between bottom of panel and flooring including all accessories prewired with insulated copper wires of suitable size. The panel shall compromise of the following fittings and fixture :-
(a) MCCB 350 Amps, 36 KA 4 pole with adjustable thermal and fixed magnetic settings - 01 No (Incoming)
(b) MCCB 100 Amps, 25KA , 3 pole with adjustable thermal and fixed magnetic settings – 03 No(Outgoing)
(c) MCCB 63 Amps, 25KA , 3 pole with adjustable thermal and fixed magnetic settings – 02 No (outgoing)
(d) On load change over switch l-O-II,320 A,4 pole,415 V,50 Hz- 01 No (e) Indicating lamps Led type (RYB).
(f) Pre-wired Digital meter with voltmeter, ammeter, selector switch, CTs, and LED Indicating Lights,. - 01 Set (g) Bus bar chamber with electrolytic grade copper strip with heat shrink cable sleeves with colour code supported on epoxy raisin based insulator 4 strips of suitable length for current rating 400 A.
(h) Civil work including PCC for fixing of panel and other work as directed by Engr-in-Charge | 1 | Each | 1,24,000 ₹1,24,000 Lowest | 1,60,000 ₹1,60,000 | 1,90,000 ₹1,90,000 |
| 3.00 | S&F cable end joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 300 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 4 | Each | 3,350 ₹13,400 | 1,200 ₹4,800 Lowest | 2,700 ₹10,800 |
| 4.00 | S&F cable end joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 150 to 240 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 12 | Each | 2,850 ₹34,200 | 1,000 ₹12,000 Lowest | 2,700 ₹32,400 |
| 5.00 | S&F cable end joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 70 to 120 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 12 | Each | 2,250 ₹27,000 | 1,000 ₹12,000 Lowest | 2,000 ₹24,000 |
| 6.00 | S&F cable end joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size upto 50 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 14 | Each | 2,050 ₹28,700 | 700 ₹9,800 Lowest | 1,500 ₹21,000 |
| 7.00 | S&F cable Straight Through joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 300 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 2 | Each | 3,600 ₹7,200 | 2,000 ₹4,000 Lowest | 2,900 ₹5,800 |
| 8.00 | S&F cable Straight Through joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 150 to 240 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 6 | Each | 2,950 ₹17,700 | 1,000 ₹6,000 Lowest | 2,400 ₹14,400 |
| 9.00 | S&F cable Straight Through joint joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 70 to 120 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 10 | Each | 2,100 ₹21,000 | 900 ₹9,000 Lowest | 1,500 ₹15,000 |
| 10.00 | S&F cable Straight Through joint joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size upto 50 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 10 | Each | 2,050 ₹20,500 | 1,000 ₹10,000 Lowest | 1,100 ₹11,000 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
11 Jun 2026, 6:00 pmClosed
GE AF LEH
GE AF LEH, NEAR POLICE HEAD QUARTER, LEH PIN 194101
REPAIR MAINT OF WORNOUT LT PANELS AMF PANELS AND OTHER ALLIED WORKS AT ORP TECH POWER HOUSE TARMAC POWER HOUSE NEW POWER HOUSE DOMESTIC POWER HOUSE 114 HU POWER HOUSE BLAST PAN POWER HOUSE AND DOMESTIC AND TECH AREA AT AF STN LEH UNDER GE AF LEH
2026_MES_766816_1
GE(AF)Leh/T-24/2026-27
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE AF LEH
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF LEH
₹70,000
Yes
17 Aug 2026
21 May 2026
13 Jun 2026
21 May 2026
11 Jun 2026
5 Jun 2026
21 May 2026 - 4 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material and labour Weather proof outdoor bus bar chamber cum LT panel, made out of 3.15 mm thick MS sheet with front & rear Opening, powder coated, dust & vermin proof, IP-66 Protection comprising 4 Nos aluminium strips each of 400 Amps, 60cm long having 10cm min distance from the body, duly insulated mounted on epoxy insulators in horizontal position in stepped manner with 4 No’s mounting legs made out of 40mm x 40mm x 6mm angle iron grouted in PCC block (30cm depth below ground level and 60cm above ground level) in cement concrete 1:3:6, type C-2 (using 40mm grade crushed stone aggregate), and connections with size of aluminium thimbles, nuts, bolts & washers including cable glands at entry and outlet points with one MCCB of 250 Amps 25 KA, 4 pole as incomer of the bas bar with taking down the existing all cables, dressing the cable properly with lugs, nuts, bolts washer etc. & refixing the same including excavation and earth work, returning filling and removal of surplus soils complete all as specified and directed by Engr-in-charge. | 1 | Each | - | - |
| 2 | Factory made LT distribution panel out door,CPRI approved, made out of 3.15 mm thick MS sheet, powder coated, dust & vermin proof, IP-66 Protection, Outdoor type factory made cubical totally enclosed type with front and rear door opening as per engineering practice provided with locking arrangement for opening of panel with provision of seperate chamber in upper part to encloser Copper busbar of cap 400 Amps fixed in steped manner on epoxy insulators in horizontal position with min 10cm distance between each busbars & panel body and 06 Nos seperate chambers of adequate size embedded in 40mm thick PCC 1:2:4 type B-1 (using 20mm graded aggregate), on angle iron of size 40x40x6mm with footing 30 cm clear space between bottom of panel and flooring including all accessories prewired with insulated copper wires of suitable size. The panel shall compromise of the following fittings and fixture :-
(a) MCCB 350 Amps, 36 KA 4 pole with adjustable thermal and fixed magnetic settings - 01 No (Incoming)
(b) MCCB 100 Amps, 25KA , 3 pole with adjustable thermal and fixed magnetic settings – 03 No(Outgoing)
(c) MCCB 63 Amps, 25KA , 3 pole with adjustable thermal and fixed magnetic settings – 02 No (outgoing)
(d) On load change over switch l-O-II,320 A,4 pole,415 V,50 Hz- 01 No (e) Indicating lamps Led type (RYB).
(f) Pre-wired Digital meter with voltmeter, ammeter, selector switch, CTs, and LED Indicating Lights,. - 01 Set (g) Bus bar chamber with electrolytic grade copper strip with heat shrink cable sleeves with colour code supported on epoxy raisin based insulator 4 strips of suitable length for current rating 400 A.
(h) Civil work including PCC for fixing of panel and other work as directed by Engr-in-Charge | 1 | Each | - | - |
| 3 | S&F cable end joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 300 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 4 | Each | - | - |
| 4 | S&F cable end joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 150 to 240 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 12 | Each | - | - |
| 5 | S&F cable end joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 70 to 120 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 12 | Each | - | - |
| 6 | S&F cable end joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size upto 50 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 14 | Each | - | - |
| 7 | S&F cable Straight Through joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 300 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 2 | Each | - | - |
| 8 | S&F cable Straight Through joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 150 to 240 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 6 | Each | - | - |
| 9 | S&F cable Straight Through joint joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size 70 to 120 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 10 | Each | - | - |
| 10 | S&F cable Straight Through joint joint kit "heat shrinkable type " suitable for 1.1 KV (LT) indoor/outdoor type ,for cable size upto 50 sqmm and suitable for 3 1/2 or 4 Core , complete all as specified and directed Make: 3M/Denson or equivalent | 10 | Each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.52 MB
tender24.pdf
Tender Documents • 0.83 MB
BOQ_858787.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .