Fabrication and Erection of Single Decker and Double Decker Trolley Of Heating Chamber Electricity Transformer Repairing Workshop Raibareilly and Lakhimpur under EWD-Lucknow.

Amount

Fabrication & Erection of Single Decker Trolley (7.5x5.5) feet • The Trolley will be fabricated having provision of Four side M.S Pillar as the leg .The Trolley will be made out of suitable size of M.S Channel of 100 x 50 x 6 mm.Top plate is to be fixed in the trolley with double support mounted of 4 mm thick sheet with welding & smooth finish for a load of 3 MT capacity . Suitable design MS Plate supported by 2 pairs of wheels with bearing on the trolley, moving on track .supports laid in the bottom floor with extension on door side for full discharge . The rail track will be made of MS Bar 02 nos. of size 50 mm x 50 mm with 18 ft. long. • The complete trolley will be painted with two coats of Red –oxide primer and then with two coats of heat resistive Aluminum Paint outside ISI Mark as per relevant both inside & outside .All Mild steel materials shall be of quality as per relevant ISS. The MS bar rail track should be properly grouted by CC the floor.

Fabrication & Erection of Double Decker Trolley (Size of Trolley) i.) Length : (2235 mm) ii.) Width : ( 2235mm) iii.) Height : ( 750 mm ) Heating Chamber is provided with the double Decker trolley in to two floor lower & upper. • The Trolley will be supplied having Double Decker System with the provision of Four side M.S Pillar as the leg & frame height 750 mm . The Trolley will be out of suitable size of M.S Channel of 100 x 50 x 6 mm fix in the trolley as the top of the plate form with double support mounted of 4 mm thick sheet with welding & smooth finish for a load of 3 MT capacity. Suitable design MS Plate supported by 2 pairs of wheels with bearing on each trolley, moving on track .supports laid in the bottom floor with extension on door side for full discharge . The rail track will be made of MS Bar 04 nos. of size 50 x 50 with 18 ft. long. • The complete trolley will be painted with two coats of Red –oxide primer and then with two coats of heat resistive Aluminum Paint outside ISI Mark as per relevant both inside & outside .All Mild steel materials shall be of quality as per relevant ISS.

R.D. ENTERPRISES