NIT No GE/ND-45/2025-26

Amount

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:4 as in closing the openings complete all as specified and directed.

Taking down cement plaster on brick /concrete wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall (external surface) in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall (internal surface) in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of OBD over a coat of alkali resistant primering paint on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of weather appex paint over a coat of birla white wall care putty complete all as specified and directed.

Removal of debris from NDC in a loading truck of 200 cubic feet and removal to a distance n.exc 20 KM complete all as specified and directed. Note : (a) Due to conjuction of space vehicle will be stand atleast 500 mtr from the debries location (b) Cost for stacking of debries from various loc is also included in the quoted rate. (c) The vehicle shall be loaded by the labour so sufficient labour shall be arrange by the contractor. (d) Contractor shall be responsible to submit the Dvr Lic, Veh RC, Police verification for obtaining permission of veh and lab from H block.

Demolition of cement concrete in ground floor and pavings not exc 15 cm in thickness below or above ground level & removing the rubbish out of MoD land complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40 mm graded agg) as in sub base complete all as specified and directed.

M&L for PU Coated cement concrete Paver tiles of size 300x300x25mm set in 15mm thick CM(1:6) including filling joints withwhite or colour cement complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including sand cushion complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, wall aprons etc laid bedded and pointed in any mortar incl mortar screed of any description incl removal of debris from site complete all as specified and directed by Engg in charge.

M&L for 20 mm thick granite work (any type ) Black or any approved coloured (table rubbed and polished in step, jambs, pillers cooking plateform, floor and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over 20mm thick cement screed base with cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incluuding Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Dismantling wrought or mild steel work of any description not otherwise provide for in any height upto two storey including necessary scaffolding where required complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, confirming to Fe 410W gde 250 A quality fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including necessary form work of height upto 2 storey complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F 4 mm dia galvanised steel wire, 150 X 100 mm mesh, made up into mattresses or cages, lapped, wired and laid in position including closing after filling complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.with ends of barsshouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe290 Gde-E-165 complete all as specified and directed by Engg in charge.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note: each line wire to be measured

S&F in repair concertina coil (PTTC) 610mm dia coil punched & tapped and provided on Y shaped complete all as specified and directed.

M&L for cement concrete type B1, 1:2:4 using 20mm graded aggregates as in benching, copings, channels, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed by Engg in charge.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new surfaces of wall including cornices & applying two coat of cement base paint over a coat of alakali resistant primer on walls complete all as specified and directed.

Cleaning, Flushing of chocked and desilting of outdoor sewage lines n. exe 300mm internal diameter of any depth upto three meter. The cleaning shall be carried out with mechanized operation by means of diesal/electric operated vehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacty and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. the sludge deposited in the sewage ling shall be fully ceaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipments and with strick supervision complete all as specified and directed. Note:- (a) The service proider/contractor during the mechanised operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) Manual cleaning operation/scavenging is prohibited. (c) The unit rate quoted by the contractor shall deem to include the cost of providing skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/stilt/liquid/mud and sand (in fou position) etc.

Desluding of existing manholes of depth upto 2 mtr (vol of MH exc 0.20 cum but not exc 2.88 cum)for liquid, solids and slurry material by machanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provison of water for jetting and removal of sludge/silt/liquid/mud abd sand (in foul position) etc removed to outside the MoD land/premises at any distance all as directed by engr-in-charge incluidng loading, unloading, digging outt pit of any size in any type of soil, surring sludge/stilt/spoil/mud etc into the pit and sprreying bleaching power over the entire surface complete all as specified and directed. Note:- (a) The service provider/contractorduring the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with machanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour and skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transpotation arrangements.

Desludging including dewatering of septic tank/soak well in dia/ depth and manholes above 2 mtr in depth for liquid and slurry material and removing the sludge from the tank by machanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr andsuction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skiled driver and operator abd supervising Engineer including provition of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, surring sludge/silt/spoil/mud tec into the pit and spreying bleaching powder over the entire surface complete all as specified and directed. Note:- (a) The service provider/contractorduring the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with machanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour 9skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transpotation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud.

Cleaning of manhole and removing the blockage sludge from manhole by manually with the help of bampos/rods/pipes incluidng rodding and flushing the water and dispose off the sludge out side of MoD land complete all as directed at site for any size, description of manhole up to 1.5 m internal depth complete all as specified and directed.

Cleaning of sewer line and removing the blockage by manually with the help of bampoos/rods/pipes including rodding and flushing the water and dispose off tge sludge out side the MoD land upto 200 mm dia pipes complete all as specified and directed.

Cleaning of Gully trap, Nahni trap, Floor trap, WC,WHB,Urinal and sink by removing the sludge dispossed off from out of defence land by mannually or machanically cleaned with water complete all as specified and directed.

Excavation in trenches in any type of soil (Soft/disintegrated) n. exc. 1.5 M wide and n. exc. 1.5 M in depth for foundation for manholes/shafts or sewer line etc. n. exc. 10 sqm on plan & n. exc. 1.5 M in depth & getting out in any type of soil complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete)set in cement mortor & removing demolished material out side defence land, Bore of pipe 100mm complete all as specified and directed.

M&L for SGSW drain pipe grade 'A' 100mm bore (internal) including laying in trenches and jointing in cement & sand morter 1:2 & testing complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggragated) as in bed including packing under & haunching against sides of SGSW drain pipe 100mm bore after they are laid & tested complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming soil in layers n. exc. 25 cm thick complete all as specified and directed.

Removing excavated materials/surplus soil out side of defence land not exc 50m at level and up to a total distance of 1.5 Km complete all as specified and directed by Engineer-in-charge.

M&L for brick work with sub class B bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed by Engg in charge.

M&L for Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work or cement concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Demolition of RCC manhole cover slabs and similar suspended work incl (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

S&F factory made precast RCC 1:2:4 manhole covers slabs any size, thickness with 3 mm thick FL around cover slab complete all as specified Make PPRC, polycrete including reinforcement as per manufacture design with frame complete all as specified and directed.

Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate finishing smooth and refrming benching as required for 150 mm dia pipes complete all as specified and directed.

S&F in repair Cast Iron trap ''P'' for cast iron pipe of size 100mm, complete all as specified and directed.

S&F in repair Cast iron floor trap of size 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4:), complete all as specified and directed.

S&F as in repair salt glazed stone ware gully trap of size 180X150 mm squire or rounded mouthed, type "P" complete all as specified and directed.

S&F in repair Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints,laid in trenches or in floors of size 100 mm bore complete all as specified and directed.

S&F in repair Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints,laid in trenches or in floors of size 75 mm bore complete all as specified and directed.

S&F in repair Cast iron bends (any radius) with ducks foot or heel rest.of size 100mm bore of pipe complete all as specified and directed.

S&F in repair Cast iron bends (any radius) with ducks foot or heel rest.of size 75mm bore of pipe complete all as specified and directed.

Demolition and breaking up drain pipes 300mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed by Engg in charge.

M&L for Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 300mm bore pipe, complete all as specified and as directed by Engr in charge.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches of internal dia 300mm jointed in cement mortar and tested complete all as specified and directed.

M&L for 15 mm thick rendering fair/unfair faces of brick work on concrete surfaces finishing even and smooth without using extra cement in CM 1:6 on walls complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring complete all as specified and directed.

M&L for brick work using except bricks (old retrived bricks from demolition shall be used) straight or curved on plan exc 6 m mean radious built in cement mortar 1:6 old size bricks complete all as specified and directed.

M&L for MS gusssets plates (plane or chequerred) channel channel square cut or notched (ordinary or counter sunk) forming holes, with out attachment grade Fe -410 W (Gde E-250 Quality A) complete all as specified and directed.

S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing including necessary double steel scaffolding where required upto two storey bldg complete all as specified and directed.

M&L for precast concrete drain cover slab 1:2:4 type B-1 using 20 mm graded stone agg and set in CM 1:4 complete all as specified and directed.

M&L for TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. Note: (a) Srl Item No 02.00, 04.00 to 07.00, 10.00 to 12.00, 14.00, 15.00, 17.00, 20.00 to 25.00, 27.00, 28.00, 37.00, 38.00, 41.00, 42.00, 44.00, 46.00 to 52.00, 54.00 to 57.00 & 59.00 to 62.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

R D ENTERPRISES (BID ID -3390993)

SANJEEV ENTERPRISES (BID ID -3385519)