REPAIR / REPLACEMENT OF PCC MOSAIC WOODEN FLOORING AND STARCAS CASES OTM ACCN AND MD ACCN OF ARC 11 WEU MDC MES ETC OF HAPPY VALLEY

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 ( 12.50 mm graded aggregate) as in levelling course of tile flooring etc. complete all as specified and as directed.

M&L Non-skid ceramic colour tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and as directed.

M&L for Non skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450X 300X 7mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall complete all as specified and directed.

M&L for light shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Including15mm thick screed bed or bedding layer in cement mortar(1:6) for laying floor finishesall as specified and directed.

M&L for Non-skid ceramic heavy duty exterior colour tiles (premimum / Special quality) 8-10 mm thick, (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, With grey pigment cement and pigment set, jointed and pointed in neat cement slurry in floors to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in section unframed work in any position complete all as specified and directed.

M&L 2nd class hard wood in scantling, clean sawn, timber fixed with nails complete all as specified and directed.

M&L 2nd class hardwood, thickness of board 25 mm Planed one side, with butt joints and fixed with nails supplied and fixed complete all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on one or more coats on old work complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded agg) as in filling complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade With Grey cement and no pigment complete all as specified and as directed.

Mirror polishing on marble/ granite/ Kota stone/ stone/ Mosiac tile work where ever required to give high gloss finish complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20mm graded agg) as in floor incl finishing even & smooth using extra cement complete all as specified and as directed.

S&F for glass dividing strip 3mm thick and 38mm width, inserted in position confirming to design complete all as specified and as directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection incl finishing even & smooth using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B2 (using 40mm graded agg) as in path incl finishing even & smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in surface channels and drains including necessary formwork complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and as directed.

Demolition of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, appron cill or platform etc. complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with 10 mm thick baking course in CM 1:4 complete all as specified and as directed.

M&L Marble work( Makarana White) 18 to 20 mm thick (table rubbed and polished) in floors, steps, jambs, pillars, windowcills, cooking platforms and like in 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over including cutting and polishing all as specified and directed.

M&L for 18 mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished fair and even complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and as directed.

Demolition of Precast cement concrete block walling in any position, complete all as specified and directed.

M&L Precast PCC (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting CM (1:6) complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for precast cover slab RCC 1:2:4 type B1 using 20mm graded stone aggregate in CM (1:6) including necessary form work complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site complete all as specified and as directed.

M&L for rendering 15 mm thick plaster in CM 1:4 in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick plaster in cm (1:3) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra cement complete all as specified and as directed.

Supply only for Integral water proofing compound.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M/S MANOJ KUMAR BAL

M/s Chandan Kumar Thakur

Ms Amrik Singh Bahra

M/S U.K ENTERPRISE

M/S. Ranjit Kumar

M/S UTTAM SAHA

N.K.TRADING COMPANY

M/s Sohini Construction

M/s Jaiswal and Co